main
Ray
Publish 0.1.0
01e7bab
MX25L6445EZNI-10G
MXIC(Macronix) · Pre-ordered Products · WSON-8-EP(6x8)
MX25L6445EZNI-10G from MXIC(Macronix), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select: serial access to the device is enabled by CS# input. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output (for 1xI/O) or Serial Data Input & Output (for 2xI/O or 4xI/O mode). |
| 3 | WP#/SIO2 | bidirectional | Write protection: connect to GND, or Serial Data Input & Output (for 4xI/O mode). |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input (for 1xI/O) or Serial Data Input & Output (for 2xI/O or 4xI/O mode). |
| 6 | SCLK | input | Clock Input. |
| 7 | NC/SIO3 | bidirectional | NC pin (Not connect) or Serial Data Input & Output (for 4xI/O mode). |
| 8 | VCC | power_in | +3.3V Power Supply. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | WSON-8-EP(6x8) |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | 2.7 | 3.6 | V | read, erase, and program operations | 5 | |
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 43 | ||
| Storage Temperature | -65 | 150 | °C | 43 | |||
| Applied Input Voltage | -0.5 | 4.6 | V | 43 | |||
| Applied Output Voltage | -0.5 | 4.6 | V | 43 | |||
| VCC to Ground Potential | -0.5 | 4.6 | V | 43 | |||
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 45 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT=VCC or GND | 45 | |
| VCC Standby Current | ISB1 | 50 | uA | VIN = VCC or GND, CS# = VCC | 45 | ||
| Deep Power-down Current | ISB2 | 20 | uA | VIN = VCC or GND, CS# = VCC | 45 | ||
| VCC Read | ICC1 | 22 | mA | fQ=70MHz (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 45 | ||
| VCC Read | ICC1 | 19 | mA | f=104MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 45 | ||
| VCC Read | ICC1 | 17 | mA | fT=70MHz (2 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 45 | ||
| VCC Read | ICC1 | 15 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 45 | ||
| VCC Read | ICC1 | 10 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 45 | ||
| VCC Program Current (PP) | ICC2 | 25 | mA | Program in Progress, CS# = VCC | 45 | ||
| VCC Write Status Register (WRSR) Current | ICC3 | 20 | mA | Program status register in progress, CS#=VCC | 45 | ||
| VCC Sector Erase Current (SE) | ICC4 | 25 | mA | Erase in Progress, CS#=VCC | 45 | ||
| VCC Chip Erase Current (CE) | ICC5 | 20 | mA | Erase in Progress, CS#=VCC | 45 | ||
| Input Low Voltage | VIL | -0.5 | 0.8 | V | 45 | ||
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 45 | ||
| Clock Frequency for FAST_READ, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | 104 | MHz | 46 | |||
| Clock Frequency for READ instructions | fRSCLK | 50 | MHz | 46 | |||
| Clock Frequency for 2READ instructions | fTSCLK | 70 | MHz | 46 | |||
| Clock Frequency for 4READ instructions | fQ | 70 | MHz | VCC=2.7V-3.6V | 46 | ||
| Clock Frequency for 4READ instructions | fQ | 85 | MHz | VCC=3.0V-3.6V | 46 | ||
| Clock Frequency for FASTDTRD instructions | fC2 | 50 | MHz | 46 | |||
| Clock Frequency for 2DTRD instructions | fT2 | 50 | MHz | 46 | |||
| Clock Frequency for 4DTRD instructions | fQ2 | 50 | MHz | 46 | |||
| Clock Frequency for 4PP (Quad page program) | f4PP | 20 | MHz | 46 | |||
| Clock High Time Fast_Read | tCH | 4.5 | ns | 46 | |||
| Clock High Time Read | tCH | 9 | ns | 46 | |||
| Clock Low Time Fast_Read | tCL | 4.5 | ns | 46 | |||
| Clock Low Time Read | tCL | 9 | ns | 46 | |||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | ns | 46 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | ns | 46 | |||
| Data In Setup Time | tDVCH | 2 | ns | 46 | |||
| Data In Hold Time | tCHDX | 5 | ns | 46 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | ns | 46 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | ns | 46 | |||
| CS# Deselect Time Read | tSHSL | 15 | ns | 46 | |||
| CS# Deselect Time Write/Erase/Program | tSHSL | 50 | ns | 46 | |||
| Output Disable Time | tSHQZ | 10 | ns | VCC=2.7V-3.6V | 46 | ||
| Output Disable Time | tSHQZ | 8 | ns | VCC=3.0V-3.6V | 46 | ||
| Clock Low to Output Valid, 1 I/O | tCLQV | 9 | ns | VCC=2.7V~3.6V, Loading: 15pF | 46 | ||
| Clock Low to Output Valid, 2 I/O & 4 I/O | tCLQV | 9.5 | ns | VCC=2.7V~3.6V, Loading: 15pF | 46 | ||
| Clock Low to Output Valid, 2 I/O & 4 I/O | tCLQV | 12 | ns | VCC=2.7V~3.6V, Loading: 30pF | 46 | ||
| Clock Low to Output Valid (DTR mode), 1 I/O, 2 I/O & 4 I/O | tCLQV2 | 9.5 | ns | VCC=2.7V~3.6V, Loading: 15pF | 46 | ||
| Output Hold Time | tCLQX | 2 | ns | 46 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | 46 | |||
| Write Protect Hold Time | tSHWL | 100 | ns | 46 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 46 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 100 | us | 46 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 100 | us | 46 | |||
| Write Status Register Cycle Time | tW | 40 | 100 | ms | 46 | ||
| Byte-Program | tBP | 9 | 300 | us | 46 | ||
| Page Program Cycle Time | tPP | 1.4 | 5 | ms | 46 | ||
| Sector Erase Cycle Time (4KB) | tSE | 60 | 300 | ms | 46 | ||
| Block Erase Cycle Time (32KB) | tBE | 0.5 | 2 | s | 46 | ||
| Block Erase Cycle Time (64KB) | tBE | 0.7 | 2 | s | 46 |
CAD (KiCad official)
- Symbol:
MX25L6445EZNI-10G - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8-EP(6x8) (KiCad packages3D, STEP)
- 3D model files:
mx25l6445ezni-10g-etched.step/mx25l6445ezni-10g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l6445ezni-10g.step/mx25l6445ezni-10g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (72 pp, sha256
63de1e48472506ce, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX25L6445EZNI-10G
**MXIC(Macronix)** · Pre-ordered Products · WSON-8-EP(6x8)
MX25L6445EZNI-10G from MXIC(Macronix), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select: serial access to the device is enabled by CS# input. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output (for 1xI/O) or Serial Data Input & Output (for 2xI/O or 4xI/O mode). |
| 3 | WP#/SIO2 | bidirectional | Write protection: connect to GND, or Serial Data Input & Output (for 4xI/O mode). |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input (for 1xI/O) or Serial Data Input & Output (for 2xI/O or 4xI/O mode). |
| 6 | SCLK | input | Clock Input. |
| 7 | NC/SIO3 | bidirectional | NC pin (Not connect) or Serial Data Input & Output (for 4xI/O mode). |
| 8 | VCC | power_in | +3.3V Power Supply. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | WSON-8-EP(6x8) |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | 2.7 | | 3.6 | V | read, erase, and program operations | 5 |
| Ambient Operating Temperature | | -40 | | 85 | °C | Industrial grade | 43 |
| Storage Temperature | | -65 | | 150 | °C | | 43 |
| Applied Input Voltage | | -0.5 | | 4.6 | V | | 43 |
| Applied Output Voltage | | -0.5 | | 4.6 | V | | 43 |
| VCC to Ground Potential | | -0.5 | | 4.6 | V | | 43 |
| Input Load Current | ILI | -2 | | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 45 |
| Output Leakage Current | ILO | -2 | | 2 | uA | VCC = VCC Max, VOUT=VCC or GND | 45 |
| VCC Standby Current | ISB1 | | | 50 | uA | VIN = VCC or GND, CS# = VCC | 45 |
| Deep Power-down Current | ISB2 | | | 20 | uA | VIN = VCC or GND, CS# = VCC | 45 |
| VCC Read | ICC1 | | | 22 | mA | fQ=70MHz (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 45 |
| VCC Read | ICC1 | | | 19 | mA | f=104MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 45 |
| VCC Read | ICC1 | | | 17 | mA | fT=70MHz (2 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open | 45 |
| VCC Read | ICC1 | | | 15 | mA | f=66MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 45 |
| VCC Read | ICC1 | | | 10 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 45 |
| VCC Program Current (PP) | ICC2 | | | 25 | mA | Program in Progress, CS# = VCC | 45 |
| VCC Write Status Register (WRSR) Current | ICC3 | | | 20 | mA | Program status register in progress, CS#=VCC | 45 |
| VCC Sector Erase Current (SE) | ICC4 | | | 25 | mA | Erase in Progress, CS#=VCC | 45 |
| VCC Chip Erase Current (CE) | ICC5 | | | 20 | mA | Erase in Progress, CS#=VCC | 45 |
| Input Low Voltage | VIL | -0.5 | | 0.8 | V | | 45 |
| Output Low Voltage | VOL | | | 0.4 | V | IOL = 1.6mA | 45 |
| Clock Frequency for FAST_READ, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | | | 104 | MHz | | 46 |
| Clock Frequency for READ instructions | fRSCLK | | | 50 | MHz | | 46 |
| Clock Frequency for 2READ instructions | fTSCLK | | | 70 | MHz | | 46 |
| Clock Frequency for 4READ instructions | fQ | | | 70 | MHz | VCC=2.7V-3.6V | 46 |
| Clock Frequency for 4READ instructions | fQ | | | 85 | MHz | VCC=3.0V-3.6V | 46 |
| Clock Frequency for FASTDTRD instructions | fC2 | | | 50 | MHz | | 46 |
| Clock Frequency for 2DTRD instructions | fT2 | | | 50 | MHz | | 46 |
| Clock Frequency for 4DTRD instructions | fQ2 | | | 50 | MHz | | 46 |
| Clock Frequency for 4PP (Quad page program) | f4PP | | | 20 | MHz | | 46 |
| Clock High Time Fast_Read | tCH | 4.5 | | | ns | | 46 |
| Clock High Time Read | tCH | 9 | | | ns | | 46 |
| Clock Low Time Fast_Read | tCL | 4.5 | | | ns | | 46 |
| Clock Low Time Read | tCL | 9 | | | ns | | 46 |
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | | | ns | | 46 |
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | | | ns | | 46 |
| Data In Setup Time | tDVCH | 2 | | | ns | | 46 |
| Data In Hold Time | tCHDX | 5 | | | ns | | 46 |
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | | | ns | | 46 |
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | | | ns | | 46 |
| CS# Deselect Time Read | tSHSL | 15 | | | ns | | 46 |
| CS# Deselect Time Write/Erase/Program | tSHSL | 50 | | | ns | | 46 |
| Output Disable Time | tSHQZ | | | 10 | ns | VCC=2.7V-3.6V | 46 |
| Output Disable Time | tSHQZ | | | 8 | ns | VCC=3.0V-3.6V | 46 |
| Clock Low to Output Valid, 1 I/O | tCLQV | | | 9 | ns | VCC=2.7V~3.6V, Loading: 15pF | 46 |
| Clock Low to Output Valid, 2 I/O & 4 I/O | tCLQV | | | 9.5 | ns | VCC=2.7V~3.6V, Loading: 15pF | 46 |
| Clock Low to Output Valid, 2 I/O & 4 I/O | tCLQV | | | 12 | ns | VCC=2.7V~3.6V, Loading: 30pF | 46 |
| Clock Low to Output Valid (DTR mode), 1 I/O, 2 I/O & 4 I/O | tCLQV2 | | | 9.5 | ns | VCC=2.7V~3.6V, Loading: 15pF | 46 |
| Output Hold Time | tCLQX | 2 | | | ns | | 46 |
| Write Protect Setup Time | tWHSL | 20 | | | ns | | 46 |
| Write Protect Hold Time | tSHWL | 100 | | | ns | | 46 |
| CS# High to Deep Power-down Mode | tDP | | | 10 | us | | 46 |
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | | | 100 | us | | 46 |
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | | | 100 | us | | 46 |
| Write Status Register Cycle Time | tW | | 40 | 100 | ms | | 46 |
| Byte-Program | tBP | | 9 | 300 | us | | 46 |
| Page Program Cycle Time | tPP | | 1.4 | 5 | ms | | 46 |
| Sector Erase Cycle Time (4KB) | tSE | | 60 | 300 | ms | | 46 |
| Block Erase Cycle Time (32KB) | tBE | | 0.5 | 2 | s | | 46 |
| Block Erase Cycle Time (64KB) | tBE | | 0.7 | 2 | s | | 46 |
## CAD (KiCad official)
- Symbol: `MX25L6445EZNI-10G`
- Footprint: `Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm`
- 3D model: WSON-8-EP(6x8) (KiCad packages3D, STEP)
- 3D model files: `mx25l6445ezni-10g-etched.step` / `mx25l6445ezni-10g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx25l6445ezni-10g.step` / `mx25l6445ezni-10g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MXIC(Macronix) datasheet](docs/mx25l6445ezni-10g-datasheet.pdf) (72 pp, sha256 `63de1e48472506ce`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx25l6445ezni-10g-datasheet.pdf)