MX25L51245GZ2I-08G

{
  "slug": "mx25l51245gz2i-08g",
  "version": "0.1.0",
  "type": "component",
  "description": "MXIC Macronix NOR FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "mx25l51245gz2i-08g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mx25l51245gz2i-08g.kicad_sym",
    "mx25l51245gz2i-08g.kicad_mod",
    "mx25l51245gz2i-08g.glb",
    "mx25l51245gz2i-08g.step",
    "mx25l51245gz2i-08g.lbr",
    "docs/hero.png",
    "docs/mx25l51245gz2i-08g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mx25l51245gz2i-08g-hero.glb",
    "mx25l51245gz2i-08g-hero.overlay.json",
    "mx25l51245gz2i-08g-etched.glb"
  ],
  "component": {
    "mpn": "MX25L51245GZ2I-08G",
    "manufacturer": "MXIC Macronix",
    "package": "WSON-8-EP(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590177593803632640",
    "parts": {
      "symbol": "mx25l51245gz2i-08g.kicad_sym",
      "footprint": "mx25l51245gz2i-08g.kicad_mod",
      "model_3d": "mx25l51245gz2i-08g-hero.glb",
      "model_3d_plain": "mx25l51245gz2i-08g-etched.glb",
      "model_3d_step": "mx25l51245gz2i-08g-etched.step",
      "model_3d_step_plain": "mx25l51245gz2i-08g.step",
      "lbr": "mx25l51245gz2i-08g.lbr"
    },
    "distributor_links": {
      "lcsc": "C2803021"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T09:21:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "error"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Chip select; serial access to the device is enabled by CS#, and the device remains in standby mode when CS# is high."
      },
      {
        "number": "2",
        "name": "SO/SIO1",
        "type": "bidirectional",
        "description": "Serial data output in single I/O mode, and bidirectional serial data SIO1 for address/dummy input and data output in 2x I/O or 4x I/O read mode."
      },
      {
        "number": "3",
        "name": "WP#/SIO2",
        "type": "bidirectional",
        "description": "Write protection, active low, used with the SRWD bit for hardware protection; becomes SIO2 in 4x I/O read mode or when QE is 1, and has an internal pull-up if not physically connected."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SI/SIO0",
        "type": "bidirectional",
        "description": "Serial data input in single I/O mode, and bidirectional serial data SIO0 for address/dummy input and data output in 2x I/O or 4x I/O read mode."
      },
      {
        "number": "6",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock input; the device supports clock frequencies up to 166MHz."
      },
      {
        "number": "7",
        "name": "RESET#/SIO3",
        "type": "bidirectional",
        "description": "Hardware reset, active low, which becomes SIO3 when QE is 1 (disabling hardware RESET on the 8-pin package) and has an internal pull-up if not physically connected."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "3V power supply input."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming mismatch: the hint says WSON-8-EP(6x8), while the datasheet names this package '8-WSO; The datasheet pinout for the 8-WSON lists only pins 1-8 and does not identify an exposed thermal pad; Pin descriptions for pins 2, 3, 5 and 7 combine page 7 pin functions with the QE and hardware-reset ",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0605,
        "at": "2026-10-19T09:21:19"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590177593803632640",
        "pages": 136,
        "sha256": "051c4f71215bd59b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mx25l51245gz2i-08g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3da5df0366874529e44e9c4c5a083f7f0ccf6c16e1bd10b35eeeb328c1db8ea5",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mx25l51245gz2i-08g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d6b0d9da52e41816a92f785816c028e4a58308dd266af8bbed6838c476a1582f",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}