component
MX25L4006EM1I-12G
Public Made by Adomby adom
MXIC(Macronix) NOR FLASH, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25L4006EM1I-12G
MXIC(Macronix) · NOR FLASH · SOP-8
MX25L4006EM1I-12G from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables serial access to the device; when high the device is deselected and in standby mode. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O mode, and Serial Data Output (SIO1) in Dual Output mode. |
| 3 | WP# | input | Write Protection input. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O mode, and Serial Data Input & Output (SIO0) in Dual Output mode. |
| 6 | SCLK | input | Serial Clock input, up to 86MHz (80MHz in Dual Output mode). |
| 7 | HOLD# | input | Hold input to pause the device without deselecting it. |
| 8 | VCC | power_in | +3.3V power supply, 2.7 to 3.6 V for read, erase and program operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 3.6 | V | read, erase, program operations | 29 | |
| Ambient operating temperature | -40 | 85 | °C | Industrial (I) grade | 27 | ||
| Storage temperature | -55 | 125 | °C | 27 | |||
| Applied input voltage | -0.5 | 4.6 | V | 27 | |||
| Applied output voltage | -0.5 | 4.6 | V | 27 | |||
| VCC to ground potential | -0.5 | 4.6 | V | 27 | |||
| Input capacitance | CIN | 6 | pF | VIN = 0V, TA=25°C, f=1.0MHz | 27 | ||
| Output capacitance | COUT | 8 | pF | VOUT = 0V, TA=25°C, f=1.0MHz | 27 | ||
| Input load current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 29 | |
| Output leakage current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 29 | |
| VCC standby current | ISB1 | 15 | 25 | uA | VIN = VCC or GND, CS# = VCC | 29 | |
| Deep power-down current | ISB2 | 2 | 10 | uA | VIN = VCC or GND, CS# = VCC | 29 | |
| VCC read current | ICC1 | 12 | mA | f=86MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 29 | ||
| VCC read current | ICC1 | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 29 | ||
| VCC program current (PP) | ICC2 | 15 | 20 | mA | Program in Progress, CS# = VCC | 29 | |
| VCC write status register current | ICC3 | 15 | mA | Program status register in progress, CS#=VCC | 29 | ||
| VCC sector erase current | ICC4 | 9 | 15 | mA | Erase in Progress, CS#=VCC | 29 | |
| VCC chip erase current | ICC5 | 15 | 20 | mA | Erase in Progress, CS#=VCC | 29 | |
| Input low voltage | VIL | -0.5 | V | max 0.3VCC | 29 | ||
| Output low voltage | VOL | 0.4 | V | IOL = 1.6mA | 29 | ||
| Low VCC write inhibit voltage | VWI | 2.1 | 2.3 | 2.5 | V | 29 | |
| Clock frequency (FAST_READ etc.) | fSCLK | 86 | MHz | min DC | 30 | ||
| Clock frequency for READ | fRSCLK | 33 | MHz | min DC | 30 | ||
| Clock frequency for DREAD | fTSCLK | 80 | MHz | min DC | 30 | ||
| Write status register cycle time | tW | 5 | 40 | ms | 30 | ||
| Byte program time | tBP | 9 | 50 | us | 30 | ||
| Page program cycle time | tPP | 0.6 | 3 | ms | 30 | ||
| Sector erase cycle time | tSE | 40 | 200 | ms | 30 | ||
| Block erase cycle time | tBE | 0.4 | 2 | s | 30 | ||
| Chip erase cycle time | tCE | 1.7 | 4 | s | 30 | ||
| VCC(min) to CS# low | tVSL | 200 | us | 31 | |||
| VCC rise time | tVR | 0.5 | 500000 | us/V | 42 | ||
| Data retention | 20 | years | 55˚C | 44 |
CAD (KiCad official)
- Symbol:
MX25L4006EM1I-12G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx25l4006em1i-12g-etched.step/mx25l4006em1i-12g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l4006em1i-12g.step/mx25l4006em1i-12g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (53 pp, sha256
d97a9df21af66c8d, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).