3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25L25673GZ4I-08G
MXIC(Macronix) · Pre-ordered Products · QFN-8
MX25L25673GZ4I-08G from MXIC(Macronix), in a QFN-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables serial access to the device; when high the device remains in standby mode. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1xI/O, or Serial Data Input & Output for 2xI/O or 4xI/O read mode. |
| 3 | SIO2 | bidirectional | Serial Data Input & Output for 4xI/O read mode. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1xI/O, or Serial Data Input & Output for 2xI/O or 4xI/O read mode. |
| 6 | SCLK | input | Clock input for the serial interface. |
| 7 | SIO3 | bidirectional | Serial Data Input & Output for 4xI/O read mode. |
| 8 | VCC | power_in | +3V power supply (2.7V to 3.6V per DC characteristics). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | QFN-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 91 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 91 | |
| VCC Standby Current | ISB1 | 15 | 100 | uA | VIN = VCC or GND, CS# = VCC | 91 | |
| Deep Power-down Current | ISB2 | 3 | 20 | uA | VIN = VCC or GND, CS# = VCC | 91 | |
| VCC Read Current | ICC1 | 16 | 30 | mA | f=133MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | 91 | |
| VCC Read Current | ICC1 | 12 | 25 | mA | f=104MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | 91 | |
| VCC Read Current | ICC1 | 12 | 20 | mA | f=84MHz, (4 x I/O read) SCLK=0.1VCC/0.9VCC, SO=Open | 91 | |
| VCC Program Current (PP) | ICC2 | 12 | 20 | mA | Program in Progress, CS# = VCC | 91 | |
| VCC Write Status Register Current | ICC3 | 10 | 12 | mA | Program status register in progress, CS#=VCC | 91 | |
| VCC Sector/Block Erase Current | ICC4 | 10 | 25 | mA | Erase in Progress, CS#=VCC | 91 | |
| VCC Chip Erase Current | ICC5 | 14 | 25 | mA | Erase in Progress, CS#=VCC | 91 | |
| Input Low Voltage | VIL | -0.5 | 0.8 | V | 91 | ||
| Input High Voltage (min is 0.7 x VCC; max VCC+0.4 not expressible) | VIH | 0.7 | VCC | printed 0.7VCC min, VCC+0.4 max | 91 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 91 | ||
| Supply Voltage | VCC | 2.7 | 3.6 | V | read, erase, and program operations | 4 | |
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 89 | ||
| VCC to Ground Potential | VCC | -0.5 | 4 | V | 89 | ||
| Storage Temperature | -65 | 150 | °C | 89 | |||
| Ambient Operating Temperature | -40 | 85 | °C | Industrial grade | 89 | ||
| Input Capacitance | CIN | 8 | pF | VIN = 0V, TA = 25°C, f = 1.0 MHz | 89 | ||
| Output Capacitance | COUT | 10 | pF | VOUT = 0V, TA = 25°C, f = 1.0 MHz | 89 | ||
| Clock Frequency for all commands (except Read) | fSCLK | 120 | MHz | 92 | |||
| Clock Frequency for READ instructions | fRSCLK | 50 | MHz | 92 | |||
| VCC Rise Time | tVR | 500000 | us/V | 94 | |||
| Output Disable Time | tSHQZ | 8 | ns | 92 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 92 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 30 | us | 92 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 30 | us | 92 | |||
| Write Status/Configuration Register Cycle Time | tW | 40 | ms | 92 | |||
| Byte-Program | tBP | 15 | 30 | us | 92 | ||
| Page Program Cycle Time | tPP | 0.25 | 0.75 | ms | 92 | ||
| Sector Erase Cycle Time | tSE | 30 | 400 | ms | 92 | ||
| Block Erase (32KB) Cycle Time | tBE32 | 180 | 1000 | ms | 92 | ||
| Block Erase (64KB) Cycle Time | tBE | 380 | 2000 | ms | 92 | ||
| Chip Erase Cycle Time | tCE | 110 | 210 | s | 92 | ||
| Erase Suspend Latency | tESL | 25 | us | 92 | |||
| Program Suspend Latency | tPSL | 25 | us | 92 |
CAD (KiCad official)
- Symbol:
MX25L25673GZ4I-08G - Footprint:
Package_DFN_QFN:QFN-8-1EP_6x5mm_P1.27mm_EP3.4x4.2mm - 3D model: QFN-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mx25l25673gz4i-08g-etched.step/mx25l25673gz4i-08g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25l25673gz4i-08g.step/mx25l25673gz4i-08g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (107 pp, sha256
fc94b4a58fc21642, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).