main
Ray Publish 0.1.0 8cc3dc4

MX25L12835FZ2I-10G

MXIC(Macronix) · NOR FLASH · WSON-8-EP(6x8)

MX25L12835FZ2I-10G from MXIC(Macronix), in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; serial access to the device is enabled by CS# input.
2 SO/SIO1 bidirectional Serial Data Output for 1 x I/O, and Serial Data Input & Output (SIO1) for 2 x I/O or 4 x I/O read mode.
3 WP#/SIO2 bidirectional Write protection, active low, or Serial Data Input & Output (SIO2) for 4 x I/O read mode.
4 GND power_in Ground.
5 SI/SIO0 bidirectional Serial Data Input for 1 x I/O, and Serial Data Input & Output (SIO0) for 2 x I/O or 4 x I/O read mode.
6 SCLK input Clock Input.
7 RESET#/SIO3 bidirectional Hardware Reset pin, active low, with internal pull-up, or Serial Data Input & Output (SIO3) for 4 x I/O read mode.
8 VCC power_in +3V power supply.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature (Industrial grade) -40 85 °C Industrial grade 85
Storage Temperature -65 150 °C 85
Applied Input Voltage (max printed as VCC+0.5V) -0.5 V 85
Applied Output Voltage (max printed as VCC+0.5V) -0.5 V 85
VCC to Ground Potential VCC -0.5 4 V 85
Input Capacitance CIN 6 pF VIN = 0V 85
Output Capacitance COUT 8 pF VOUT = 0V 85
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 87
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 87
VCC Standby Current ISB1 10 50 uA VIN = VCC or GND, CS# = VCC 87
VCC Read Current (133MHz, 4 x I/O read) ICC1 14 25 mA f=133MHz, (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open 87
VCC Read Current (104MHz, 4 x I/O read) ICC1 20 mA f=104MHz, (4 x I/O read), SCLK=0.1VCC/0.9VCC, SO=Open 87
VCC Read Current (84MHz) ICC1 15 mA f=84MHz, SCLK=0.1VCC/0.9VCC, SO=Open 87
VCC Program Current (PP) ICC2 14 20 mA Program in Progress, CS# = VCC 87
VCC Write Status Register (WRSR) Current ICC3 10 12 mA Program status register in progress, CS#=VCC 87
VCC Sector/Block (32K, 64K) Erase Current (SE/BE/BE32K) ICC4 14 25 mA Erase in Progress, CS#=VCC 87
VCC Chip Erase Current (CE) ICC5 14 25 mA Erase in Progress, CS#=VCC 87
Input Low Voltage VIL -0.5 0.8 V 87
Output Low Voltage VOL 0.2 V IOL = 100uA 87
Clock Frequency for all commands (except Read) fSCLK 133 MHz 88
Clock Frequency for READ instructions fRSCLK 50 MHz 88
Clock Frequency for 2READ instructions fTSCLK 84 MHz 88
Clock Frequency for 4READ instructions fQ 84 MHz 88
Clock High Time tCH 3.3 ns Others (fSCLK) 88
Clock High Time tCH 7 ns Normal Read (fRSCLK) 88
Clock Low Time tCL 3.3 ns Others (fSCLK) 88
Clock Low Time tCL 7 ns Normal Read (fRSCLK) 88
CS# Active Setup Time (relative to SCLK) tSLCH 3 ns 88
CS# Not Active Hold Time (relative to SCLK) tCHSL 3 ns 88
Data In Setup Time tDVCH 2 ns 88
Data In Hold Time tCHDX 2 ns 88
CS# Active Hold Time (relative to SCLK) tCHSH 3 ns 88
CS# Not Active Setup Time (relative to SCLK) tSHCH 3 ns 88
CS# Deselect Time tSHSL 7 ns Read 88
CS# Deselect Time tSHSL 30 ns Write/Erase/Program 88
Clock Low to Output Valid tCLQV 8 ns Loading: 30pF 88
Clock Low to Output Valid tCLQV 6 ns Loading: 15pF 88
Output Hold Time tCLQX 1 ns 88
Write Protect Setup Time tWHSL 20 ns 88
Write Protect Hold Time tSHWL 100 ns 88
Write Status/Configuration Register Cycle Time tW 40 ms 88
Byte-Program Cycle Time tBP 16 30 us 88
Page Program Cycle Time tPP 0.5 1.5 ms 88
Page Program Cycle Time (n bytes) tPP 1.5 ms n bytes to program; formula 0.008+(n x 0.004) per note 6 88
Sector Erase Cycle Time tSE 30 120 ms 88
Block Erase (32KB) Cycle Time tBE32 150 650 ms 88
Block Erase (64KB) Cycle Time tBE 280 650 ms 88
Chip Erase Cycle Time tCE 50 80 s 88
Erase Suspend Latency tESL 25 us 88
Program Suspend Latency tPSL 25 us 88
Latency between Program Resume and next Suspend tPRS 0.3 100 us 88
Latency between Erase Resume and next Suspend tERS 0.3 400 us 88
VCC Power Supply VCC 2.7 3.6 V 92
VCC(min.) to device operation tVSL 800 us 92
Write Inhibit Voltage VWI 1.5 2.5 V 92
VCC voltage needed to fall below VPWD for ensuring initialization VPWD 0.9 V 92
Minimum duration for ensuring initialization tPWD 300 us 92
VCC Rise Time tVR 500000 us/V 90
Data retention 20 years 55˚C 93

CAD (KiCad official)

  • Symbol: MX25L12835FZ2I-10G
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: mx25l12835fz2i-10g-etched.step / mx25l12835fz2i-10g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l12835fz2i-10g.step / mx25l12835fz2i-10g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (101 pp, sha256 7adee1989f0eee76, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF