component

MX25L12833FM2I-10GTR

Public Made by Adom

by adom

MXIC Macronix NOR FLASH, SOP-8-208mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemorymx25l12833fm2i-10gtr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mx25l12833fm2i-10gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
mx25l12833fm2i-10gtr-etched.fit.json mx25l12833fm2i-10gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mx25l12833fm2i-10gtr-etched.glb mx25l12833fm2i-10gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mx25l12833fm2i-10gtr-etched.step mx25l12833fm2i-10gtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mx25l12833fm2i-10gtr.glb Publish 0.1.0 · Ray
mx25l12833fm2i-10gtr.kicad_mod Publish 0.1.0 · Ray
mx25l12833fm2i-10gtr.kicad_sym Publish 0.1.0 · Ray
mx25l12833fm2i-10gtr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
mx25l12833fm2i-10gtr.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json mx25l12833fm2i-10gtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mx25l12833fm2i-10gtr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MX25L12833FM2I-10GTR

MXIC Macronix · NOR FLASH · SOP-8-208mil

MX25L12833FM2I-10GTR from MXIC Macronix, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select, active low. Enables/disables the device. All commands, address, and data transfers are framed by CS# being held low; CS# high puts the device in standby.
2 SO/SIO1 bidirectional Serial Data Output (MISO) in Single I/O SPI mode; becomes bidirectional serial data line SIO1 in Dual I/O (2 x I/O) and Quad I/O (4 x I/O) read modes.
3 WP#/SIO2 bidirectional Write Protect input (active low) in single/dual I/O modes, protects the Status Register when SRWD bit is set; becomes bidirectional serial data line SIO2 in Quad I/O (4 x I/O) read mode. Has an internal pull-up when not physically connected.
4 GND power_in Device ground reference (0 V).
5 SI/SIO0 bidirectional Serial Data Input (MOSI) in Single I/O SPI mode; becomes bidirectional serial data line SIO0 in Dual I/O (2 x I/O) and Quad I/O (4 x I/O) read modes.
6 SCLK input Serial clock input. All SPI transactions are synchronous to this clock (SPI Mode 0 and Mode 3). Supports up to 133 MHz.
7 RESET#/SIO3 bidirectional Hardware Reset input (active low) in single/dual I/O modes; becomes bidirectional serial data line SIO3 in Quad I/O (4 x I/O) read mode. Has an internal pull-up when not physically connected.
8 VCC power_in +3 V power supply. Operating range 2.7 V to 3.6 V for read/erase/program operations.

Key specifications

Parameter Value
Manufacturer MXIC Macronix
Package SOP-8-208mil
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MX25L12833FM2I-10GTR
  • MX25L12833FM2I-10GTRMI-10G
  • MX25L12833FM2I-10GTRZNI-10G
  • MX25L12833FM2I-10GTRZ2I-10G

CAD (KiCad official)

  • Symbol: MX25L12833FM2I-10GTR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8-208mil (KiCad packages3D, STEP)
  • 3D model files: mx25l12833fm2i-10gtr-etched.step / mx25l12833fm2i-10gtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25l12833fm2i-10gtr.step / mx25l12833fm2i-10gtr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mx25l12833fm2i-10gtr.step 122 KB You want the bare part, or you mark your own boards.
mx25l12833fm2i-10gtr-etched.step 3.6 MB You want the part with MX25L12833FM2I-10GTR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 886 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC Macronix datasheet (90 pp, sha256 b26659f61da53028, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF