main
Ray
Publish 0.1.0
513c79c
MX2003
Mixic · Darlington Transistor Arrays · SOP-16
MX2003 from Mixic, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B1 | input | Input pin for Darlington driver channel 1, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 2 | B2 | input | Input pin for Darlington driver channel 2, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 3 | B3 | input | Input pin for Darlington driver channel 3, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 4 | B4 | input | Input pin for Darlington driver channel 4, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 5 | B5 | input | Input pin for Darlington driver channel 5, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 6 | B6 | input | Input pin for Darlington driver channel 6, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 7 | VO | power_out | Regulated 5 V output of the internal 78L05 three-terminal regulator, with a continuous output current of 100 mA at TA=25 ℃ and IC=400 mA stated as the limit. |
| 8 | GND | power_in | Ground terminal of the internal 78L05 regulator. |
| 9 | VI | power_in | Input supply for the internal 78L05 regulator, with a recommended input voltage of 7 to 20 V and an absolute maximum of 30 V. |
| 10 | COM | passive | Common terminal for the driver circuit's clamp diodes, with a maximum voltage of 50 V. |
| 11 | C6 | output | Open collector output of Darlington driver channel 6, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 12 | C5 | output | Open collector output of Darlington driver channel 5, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 13 | C4 | output | Open collector output of Darlington driver channel 4, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 14 | C3 | output | Open collector output of Darlington driver channel 3, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 15 | C2 | output | Open collector output of Darlington driver channel 2, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 16 | C1 | output | Open collector output of Darlington driver channel 1, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Mixic |
| Package | SOP-16 |
| Category | Transistors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-emitter voltage (pins 11-16) | VCE | 50 | V | 3 | |||
| COM terminal voltage (pin 10) | VCOM | 50 | V | 3 | |||
| 78L05 input voltage (pin 9) | VI | 30 | V | 3 | |||
| Control signal input voltage (pins 1-6) | VIN | 30 | V | 3 | |||
| Collector peak current | ICP | 500 | mA | 3 | |||
| Output clamp diode forward current | IOK | 500 | mA | 3 | |||
| Total emitter peak current | IET | -2.5 | A | Printed as -2.5 A | 3 | ||
| Maximum operating junction temperature | TJMAX | 150 | ℃ | 3 | |||
| Soldering temperature | 260 | ℃ | 10s | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 3 | ||
| 78L05 input voltage | VI | 7 | 20 | V | 3 | ||
| 78L05 continuous output current | IO | 100 | mA | VIN=14V, TA=25℃, IC=400mA | 3 | ||
| 78L05 continuous output current | IO | 65 | mA | VIN=14V, TA=85℃, IC=0mA | 3 | ||
| 78L05 continuous output current | IO | 85 | mA | VIN=12V, TA=85℃, IC=0mA | 3 | ||
| Driver output collector-emitter voltage | VCE | 50 | V | 3 | |||
| Driver COM terminal voltage | VCOM | 50 | V | 3 | |||
| Driver output current per channel | IC | 0 | 370 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=10% | 3 | |
| Driver output current per channel | IC | 0 | 130 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=50% | 3 | |
| Driver output current per channel | IC | 0 | 233 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=10% (second pair, condition not labelled separately) | 3 | |
| Driver output current per channel | IC | 0 | 70 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=50% (second pair, condition not labelled separately) | 3 | |
| Driver control signal input voltage | VIN | 0 | 24 | V | 3 | ||
| Driver input voltage (output on) | VIN(ON) | 2.8 | 24 | V | IC=400mA | 3 | |
| Driver input voltage (output off) | VIN(OFF) | 0.7 | V | 3 | |||
| Driver clamp diode reverse voltage | VR | 50 | V | 3 | |||
| Driver clamp diode forward current | IF | 350 | mA | Pulse current | 3 | ||
| Operating ambient temperature range | TA | -20 | 85 | ℃ | 3 | ||
| Operating junction temperature | TJ | 125 | ℃ | 3 | |||
| Power dissipation | PD | 0.76 | W | TA=85℃ | 3 | ||
| Input on voltage | VIN(ON) | 1.9 | 2.4 | V | VCE(ON)=2V, IC=200mA | 4 | |
| Input on voltage | VIN(ON) | 2 | 2.7 | V | VCE(ON)=2V, IC=250mA | 4 | |
| Input on voltage | VIN(ON) | 2.1 | 3 | V | VCE(ON)=2V, IC=300mA | 4 | |
| Collector-emitter on voltage | VCE(ON) | 0.78 | V | VIN=2.4V, IC=30mA | 4 | ||
| Collector-emitter on voltage | VCE(ON) | 0.82 | V | VIN=2.4V, IC=60mA | 4 | ||
| Collector-emitter on voltage | VCE(ON) | 0.9 | V | VIN=2.4V, IC=120mA | 4 | ||
| Clamp diode forward voltage | VF | 1.4 | 1.6 | V | IF=350mA | 4 | |
| Collector off-state leakage current | ICEX | 50 | μA | VCE=50V, IIN=0 | 4 | ||
| Input current | IIN | 4 | mA | VIN=12V | 4 | ||
| Input current | IIN | 1.4 | mA | VIN=5V | 4 | ||
| Clamp diode reverse leakage current | IR | 50 | μA | VR=50V | 4 | ||
| Propagation delay low-to-high | tPLH | 0.15 | 1 | μs | VL=12V, RL=45Ω | 4 | |
| Propagation delay high-to-low | tPHL | 0.15 | 1 | μs | VL=12V, RL=45Ω | 4 | |
| 78L05 output voltage | VO | 4.8 | 5 | 5.2 | V | 4 | |
| 78L05 output voltage | VO | 4.75 | 5 | 5.25 | V | 7V≤VI≤20V, 1mA≤IO≤40mA | 4 |
| 78L05 line regulation | ΔVOI | 32 | 150 | mV | 7V≤VI≤20V | 4 | |
| 78L05 line regulation | ΔVOI | 26 | 100 | mV | 8V≤VI≤20V | 4 | |
| 78L05 load regulation | ΔVOL | 15 | 60 | mV | 1mA≤IO≤100mA | 4 | |
| 78L05 load regulation | ΔVOL | 8 | 30 | mV | 1mA≤IO≤40mA | 4 | |
| 78L05 quiescent current | IQ | 3.8 | 6 | mA | 4 | ||
| 78L05 quiescent current change | ΔIQ | 1.5 | mA | 8V≤VI≤20V | 4 | ||
| 78L05 dropout voltage | VDROP | 1.7 | V | 4 | |||
| Over-temperature protection threshold | TOTP | 150 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
MX2003 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
mx2003-etched.step/mx2003-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx2003.step/mx2003.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Mixic datasheet (7 pp, sha256
ef4cc3ce402f79af, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX2003
**Mixic** · Darlington Transistor Arrays · SOP-16
MX2003 from Mixic, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B1 | input | Input pin for Darlington driver channel 1, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 2 | B2 | input | Input pin for Darlington driver channel 2, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 3 | B3 | input | Input pin for Darlington driver channel 3, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 4 | B4 | input | Input pin for Darlington driver channel 4, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 5 | B5 | input | Input pin for Darlington driver channel 5, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 6 | B6 | input | Input pin for Darlington driver channel 6, which has a 2.7 kΩ series base resistor and accepts drive signals from 0 to 24 V (VIN(OFF) max 0.7 V, VIN(ON) min 2.8 V at IC=400 mA). |
| 7 | VO | power_out | Regulated 5 V output of the internal 78L05 three-terminal regulator, with a continuous output current of 100 mA at TA=25 ℃ and IC=400 mA stated as the limit. |
| 8 | GND | power_in | Ground terminal of the internal 78L05 regulator. |
| 9 | VI | power_in | Input supply for the internal 78L05 regulator, with a recommended input voltage of 7 to 20 V and an absolute maximum of 30 V. |
| 10 | COM | passive | Common terminal for the driver circuit's clamp diodes, with a maximum voltage of 50 V. |
| 11 | C6 | output | Open collector output of Darlington driver channel 6, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 12 | C5 | output | Open collector output of Darlington driver channel 5, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 13 | C4 | output | Open collector output of Darlington driver channel 4, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 14 | C3 | output | Open collector output of Darlington driver channel 3, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 15 | C2 | output | Open collector output of Darlington driver channel 2, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
| 16 | C1 | output | Open collector output of Darlington driver channel 1, rated for a collector-emitter voltage of 50 V and a peak collector current of 500 mA per channel. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Mixic |
| Package | SOP-16 |
| Category | Transistors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-emitter voltage (pins 11-16) | VCE | | | 50 | V | | 3 |
| COM terminal voltage (pin 10) | VCOM | | | 50 | V | | 3 |
| 78L05 input voltage (pin 9) | VI | | | 30 | V | | 3 |
| Control signal input voltage (pins 1-6) | VIN | | | 30 | V | | 3 |
| Collector peak current | ICP | | | 500 | mA | | 3 |
| Output clamp diode forward current | IOK | | | 500 | mA | | 3 |
| Total emitter peak current | IET | -2.5 | | | A | Printed as -2.5 A | 3 |
| Maximum operating junction temperature | TJMAX | | | 150 | ℃ | | 3 |
| Soldering temperature | | | | 260 | ℃ | 10s | 3 |
| Storage temperature range | Tstg | -65 | | 150 | ℃ | | 3 |
| 78L05 input voltage | VI | 7 | | 20 | V | | 3 |
| 78L05 continuous output current | IO | | | 100 | mA | VIN=14V, TA=25℃, IC=400mA | 3 |
| 78L05 continuous output current | IO | | | 65 | mA | VIN=14V, TA=85℃, IC=0mA | 3 |
| 78L05 continuous output current | IO | | | 85 | mA | VIN=12V, TA=85℃, IC=0mA | 3 |
| Driver output collector-emitter voltage | VCE | | | 50 | V | | 3 |
| Driver COM terminal voltage | VCOM | | | 50 | V | | 3 |
| Driver output current per channel | IC | 0 | | 370 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=10% | 3 |
| Driver output current per channel | IC | 0 | | 130 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=50% | 3 |
| Driver output current per channel | IC | 0 | | 233 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=10% (second pair, condition not labelled separately) | 3 |
| Driver output current per channel | IC | 0 | | 70 | mA/ch | TPW=25ms, TA=85℃, TJ=120℃, Duty=50% (second pair, condition not labelled separately) | 3 |
| Driver control signal input voltage | VIN | 0 | | 24 | V | | 3 |
| Driver input voltage (output on) | VIN(ON) | 2.8 | | 24 | V | IC=400mA | 3 |
| Driver input voltage (output off) | VIN(OFF) | | | 0.7 | V | | 3 |
| Driver clamp diode reverse voltage | VR | | | 50 | V | | 3 |
| Driver clamp diode forward current | IF | | | 350 | mA | Pulse current | 3 |
| Operating ambient temperature range | TA | -20 | | 85 | ℃ | | 3 |
| Operating junction temperature | TJ | | | 125 | ℃ | | 3 |
| Power dissipation | PD | | | 0.76 | W | TA=85℃ | 3 |
| Input on voltage | VIN(ON) | | 1.9 | 2.4 | V | VCE(ON)=2V, IC=200mA | 4 |
| Input on voltage | VIN(ON) | | 2 | 2.7 | V | VCE(ON)=2V, IC=250mA | 4 |
| Input on voltage | VIN(ON) | | 2.1 | 3 | V | VCE(ON)=2V, IC=300mA | 4 |
| Collector-emitter on voltage | VCE(ON) | | | 0.78 | V | VIN=2.4V, IC=30mA | 4 |
| Collector-emitter on voltage | VCE(ON) | | | 0.82 | V | VIN=2.4V, IC=60mA | 4 |
| Collector-emitter on voltage | VCE(ON) | | | 0.9 | V | VIN=2.4V, IC=120mA | 4 |
| Clamp diode forward voltage | VF | | 1.4 | 1.6 | V | IF=350mA | 4 |
| Collector off-state leakage current | ICEX | | | 50 | μA | VCE=50V, IIN=0 | 4 |
| Input current | IIN | | | 4 | mA | VIN=12V | 4 |
| Input current | IIN | | | 1.4 | mA | VIN=5V | 4 |
| Clamp diode reverse leakage current | IR | | | 50 | μA | VR=50V | 4 |
| Propagation delay low-to-high | tPLH | | 0.15 | 1 | μs | VL=12V, RL=45Ω | 4 |
| Propagation delay high-to-low | tPHL | | 0.15 | 1 | μs | VL=12V, RL=45Ω | 4 |
| 78L05 output voltage | VO | 4.8 | 5 | 5.2 | V | | 4 |
| 78L05 output voltage | VO | 4.75 | 5 | 5.25 | V | 7V≤VI≤20V, 1mA≤IO≤40mA | 4 |
| 78L05 line regulation | ΔVOI | | 32 | 150 | mV | 7V≤VI≤20V | 4 |
| 78L05 line regulation | ΔVOI | | 26 | 100 | mV | 8V≤VI≤20V | 4 |
| 78L05 load regulation | ΔVOL | | 15 | 60 | mV | 1mA≤IO≤100mA | 4 |
| 78L05 load regulation | ΔVOL | | 8 | 30 | mV | 1mA≤IO≤40mA | 4 |
| 78L05 quiescent current | IQ | | 3.8 | 6 | mA | | 4 |
| 78L05 quiescent current change | ΔIQ | | | 1.5 | mA | 8V≤VI≤20V | 4 |
| 78L05 dropout voltage | VDROP | | | 1.7 | V | | 4 |
| Over-temperature protection threshold | TOTP | | | 150 | ℃ | | 4 |
## CAD (KiCad official)
- Symbol: `MX2003`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `mx2003-etched.step` / `mx2003-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx2003.step` / `mx2003.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Mixic datasheet](docs/mx2003-datasheet.pdf) (7 pp, sha256 `ef4cc3ce402f79af`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx2003-datasheet.pdf)