main
Ray
Publish 0.1.0
e588d51
MX1603-MS
MSKSEMI · Brushed DC Motor Drivers · SOP-8
MX1603-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Reverse-direction logic input, with VINH at least 2.2 V and VINL at most 0.7 V, and input voltage up to 18 V. |
| 2 | FI | input | Forward-direction logic input, with VINH at least 2.2 V and VINL at most 0.7 V, and input voltage up to 18 V. |
| 3 | GND | power_in | Ground terminal; all voltage values are referenced to this terminal. |
| 4 | VCC | power_in | Power supply input with operating range 3.0 V to 18 V and absolute maximum of 20 V. |
| 5 | FO | output | Forward output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
| 6 | FO | output | Forward output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
| 7 | BO | output | Reverse output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
| 8 | BO | output | Reverse output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 | VCC | 20 | V | 3 | |||
| 输出持续电流 | lout | 9 | A | 3 | |||
| 工作温度 | Top | -25 | 85 | ℃ | 3 | ||
| 储存温度 | Tstg | -55 | 150 | ℃ | 3 | ||
| 工作电压范围 | VCC | 3 | 18 | V | 4 | ||
| 输入信号电压 | VINH | -0.3 | 18 | V | 4 | ||
| 输出持续电流 | VOUT_X | 0 | 5 | A | 基于 40mm2 单面 PCB,FR4 PCB(1 oz.) | 4 | |
| 逻辑输入频率 | FIN_X | 30 | KHz | 4 | |||
| 工作电压 | Vopr | 3 | 18 | V | 4 | ||
| 待机电流 | lCCST | 1 | uA | VCC=12V,FI=BI=0V,noload | 4 | ||
| 低压保护 UVLO | UVLO | 1.9 | 2.2 | 2.8 | V | VCC rising | 4 |
| 输入高电平 | VINH | 2.2 | V | 4 | |||
| 输入低电平 | VINL | 0.7 | V | 4 | |||
| 输入高电平时电流 | IINH | 110 | 200 | uA | VCC = 12V,VIN = 5V | 4 | |
| 输入低电平时电流 | IINL | 1 | uA | VCC = 12V,VIN= 0V | 4 | ||
| 输入控制脉宽 tH | tH | 100 | ns | 7 | |||
| 输入控制脉宽 tL | tL | 100 | ns | 7 | |||
| 输入控制周期 tH+tL | tH + tL | 33 | us | 7 |
CAD (KiCad official)
- Symbol:
MX1603-MS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mx1603-ms-etched.step/mx1603-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx1603-ms.step/mx1603-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
9e0cad3b6a43f2c9, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX1603-MS
**MSKSEMI** · Brushed DC Motor Drivers · SOP-8
MX1603-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Reverse-direction logic input, with VINH at least 2.2 V and VINL at most 0.7 V, and input voltage up to 18 V. |
| 2 | FI | input | Forward-direction logic input, with VINH at least 2.2 V and VINL at most 0.7 V, and input voltage up to 18 V. |
| 3 | GND | power_in | Ground terminal; all voltage values are referenced to this terminal. |
| 4 | VCC | power_in | Power supply input with operating range 3.0 V to 18 V and absolute maximum of 20 V. |
| 5 | FO | output | Forward output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
| 6 | FO | output | Forward output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
| 7 | BO | output | Reverse output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
| 8 | BO | output | Reverse output to the motor, with output continuous current up to 5.0 A under recommended conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 | VCC | | | 20 | V | | 3 |
| 输出持续电流 | lout | | | 9 | A | | 3 |
| 工作温度 | Top | -25 | | 85 | ℃ | | 3 |
| 储存温度 | Tstg | -55 | | 150 | ℃ | | 3 |
| 工作电压范围 | VCC | 3 | | 18 | V | | 4 |
| 输入信号电压 | VINH | -0.3 | | 18 | V | | 4 |
| 输出持续电流 | VOUT_X | 0 | | 5 | A | 基于 40mm2 单面 PCB,FR4 PCB(1 oz.) | 4 |
| 逻辑输入频率 | FIN_X | | | 30 | KHz | | 4 |
| 工作电压 | Vopr | 3 | | 18 | V | | 4 |
| 待机电流 | lCCST | | | 1 | uA | VCC=12V,FI=BI=0V,noload | 4 |
| 低压保护 UVLO | UVLO | 1.9 | 2.2 | 2.8 | V | VCC rising | 4 |
| 输入高电平 | VINH | 2.2 | | | V | | 4 |
| 输入低电平 | VINL | | | 0.7 | V | | 4 |
| 输入高电平时电流 | IINH | | 110 | 200 | uA | VCC = 12V,VIN = 5V | 4 |
| 输入低电平时电流 | IINL | | | 1 | uA | VCC = 12V,VIN= 0V | 4 |
| 输入控制脉宽 tH | tH | 100 | | | ns | | 7 |
| 输入控制脉宽 tL | tL | 100 | | | ns | | 7 |
| 输入控制周期 tH+tL | tH + tL | 33 | | | us | | 7 |
## CAD (KiCad official)
- Symbol: `MX1603-MS`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mx1603-ms-etched.step` / `mx1603-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx1603-ms.step` / `mx1603-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](docs/mx1603-ms-datasheet.pdf) (9 pp, sha256 `9e0cad3b6a43f2c9`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed (audit)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx1603-ms-datasheet.pdf)