main
Ray
Publish 0.1.0
fc19fc4
MTQH201210S100MBT
MetalLions · Power Inductors · 0805
MTQH201210S100MBT from MetalLions, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Inductor terminal electrode on one end of the body (10.0 µH at 1 MHz, 0 A; Rdc max 660 mΩ; Irms 1.0 A max, Isat 1.0 A max). |
| 2 | 2 | passive | Inductor terminal electrode on the opposite end of the body (10.0 µH at 1 MHz, 0 A; Rdc max 660 mΩ; Irms 1.0 A max, Isat 1.0 A max). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MetalLions |
| Package | 0805 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code M) | -20 | 20 | % | Part-number code M: ±20% | 1 | ||
| DC resistance | Rdc | 600 | 660 | mΩ | 3 | ||
| Heat rating current | Irms | 1.1 | 1 | A | Note 3: DC current that causes approx. ΔT of 40 ℃ | 3 | |
| Saturation current | Isat | 1.2 | 1 | A | Note 4: DC current that causes L0 to drop approx. 30% | 3 | |
| Operating temperature range | -55 | 125 | ℃ | Including self temp. rise (Note 5) | 3 | ||
| Part temperature (ambient + temp rise) | 125 | ℃ | Worst-case operating conditions; ambient + temp rise (Note 6) | 3 | |||
| Temperature characteristic (inductance change) | -20 | 20 | % | Pc-b, Pc-d; steps +20℃, -40℃, +20℃, +125℃, +20℃ (30~45) | 6 | ||
| Insulation resistance | 100 | MΩ | 100 VDC between inductor coil and middle of top surface of body for 60 seconds | 6 | |||
| Resistance to soldering heat: inductance change | -10 | 10 | Solder 260±5℃, immersion 10±1 s; printed as 'Within ±10' with no unit | 6 | |||
| High temperature: inductance change | -10 | 10 | % | 125±2℃, 1000 hours; measured 24±4 h after test | 6 | ||
| Low temperature: inductance change | -10 | 10 | % | -40±2℃, 1000 hours; measured 24±4 h after test | 6 | ||
| Thermal shock: inductance change | -10 | 10 | % | (-55±3)℃ and (125±3)℃, 32 cycles | 6 | ||
| Static humidity: inductance change | -10 | 10 | % | (95±3)%RH at (60±2)℃, 1000±4 h | 6 | ||
| Storage with Irms applied: inductance change | -10 | 10 | % | Stored at (85±2)℃, 1000±4 hours with Irms applied | 6 | ||
| Inductance | L0 | 10 | µH | @ (0A) 1MHz; test condition 1MHz, 1.0Vrms (Note 2) | 3 |
CAD (KiCad official)
- Symbol:
MTQH201210S100MBT - Footprint:
Inductor_SMD:L_0805_2012Metric - 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files:
mtqh201210s100mbt-etched.step/mtqh201210s100mbt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mtqh201210s100mbt.step/mtqh201210s100mbt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MetalLions datasheet (8 pp, sha256
dbca9a8af3ec0f41, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MTQH201210S100MBT
**MetalLions** · Power Inductors · 0805
MTQH201210S100MBT from MetalLions, in a 0805. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Inductor terminal electrode on one end of the body (10.0 µH at 1 MHz, 0 A; Rdc max 660 mΩ; Irms 1.0 A max, Isat 1.0 A max). |
| 2 | 2 | passive | Inductor terminal electrode on the opposite end of the body (10.0 µH at 1 MHz, 0 A; Rdc max 660 mΩ; Irms 1.0 A max, Isat 1.0 A max). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MetalLions |
| Package | 0805 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code M) | | -20 | | 20 | % | Part-number code M: ±20% | 1 |
| DC resistance | Rdc | | 600 | 660 | mΩ | | 3 |
| Heat rating current | Irms | | 1.1 | 1 | A | Note 3: DC current that causes approx. ΔT of 40 ℃ | 3 |
| Saturation current | Isat | | 1.2 | 1 | A | Note 4: DC current that causes L0 to drop approx. 30% | 3 |
| Operating temperature range | | -55 | | 125 | ℃ | Including self temp. rise (Note 5) | 3 |
| Part temperature (ambient + temp rise) | | | | 125 | ℃ | Worst-case operating conditions; ambient + temp rise (Note 6) | 3 |
| Temperature characteristic (inductance change) | | -20 | | 20 | % | Pc-b, Pc-d; steps +20℃, -40℃, +20℃, +125℃, +20℃ (30~45) | 6 |
| Insulation resistance | | 100 | | | MΩ | 100 VDC between inductor coil and middle of top surface of body for 60 seconds | 6 |
| Resistance to soldering heat: inductance change | | -10 | | 10 | | Solder 260±5℃, immersion 10±1 s; printed as 'Within ±10' with no unit | 6 |
| High temperature: inductance change | | -10 | | 10 | % | 125±2℃, 1000 hours; measured 24±4 h after test | 6 |
| Low temperature: inductance change | | -10 | | 10 | % | -40±2℃, 1000 hours; measured 24±4 h after test | 6 |
| Thermal shock: inductance change | | -10 | | 10 | % | (-55±3)℃ and (125±3)℃, 32 cycles | 6 |
| Static humidity: inductance change | | -10 | | 10 | % | (95±3)%RH at (60±2)℃, 1000±4 h | 6 |
| Storage with Irms applied: inductance change | | -10 | | 10 | % | Stored at (85±2)℃, 1000±4 hours with Irms applied | 6 |
| Inductance | L0 | | 10 | | µH | @ (0A) 1MHz; test condition 1MHz, 1.0Vrms (Note 2) | 3 |
## CAD (KiCad official)
- Symbol: `MTQH201210S100MBT`
- Footprint: `Inductor_SMD:L_0805_2012Metric`
- 3D model: 0805 (KiCad packages3D, STEP)
- 3D model files: `mtqh201210s100mbt-etched.step` / `mtqh201210s100mbt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mtqh201210s100mbt.step` / `mtqh201210s100mbt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MetalLions datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603122357888299008) (8 pp, sha256 `dbca9a8af3ec0f41`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mtqh201210s100mbt-datasheet.pdf)