main
Ray
Publish 0.1.0
9739126
MTCH112-I
Microchip Tech · Pre-ordered MCUs · SOIC-8
MTCH112-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the device operates over a 1.8V to 3.6V range. |
| 2 | MTO/INT | output | Active-low detect output and notification interrupt pin, always driven to VDD or VSS; it pulses low for at least 1ms when any state change occurs if no output states are selected in OUTCON. |
| 3 | MTI0 | passive | Proximity/touch sensor input; an additional resistor of at least 4.7k is recommended for best noise immunity, and sensors up to 40 pF are supported. |
| 4 | RESET | input | Active-low device reset input. |
| 5 | SDA | bidirectional | I2C serial data connection; it should be connected to the I2C master SDA with a 1.5k pull-up resistor to VDD. |
| 6 | SCL | input | I2C serial clock connection; it should be connected to the I2C master SCL with a 1.5k pull-up resistor to VDD. |
| 7 | MTI1/MTGRD0 | passive | Proximity/touch sensor input for MTI1, and active guard shield driver for MTI0 that is driven in phase with MTI0 to minimize the voltage differential between the two pins. |
| 8 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 1.8 | 3.6 | V | 1 | |||
| Operating Temperature | -40 | 85 | oC | 1 |
CAD (KiCad official)
- Symbol:
MTCH112-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mtch112-i-etched.step/mtch112-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mtch112-i.step/mtch112-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (6 pp, sha256
f38657489143fb7b, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MTCH112-I
**Microchip Tech** · Pre-ordered MCUs · SOIC-8
MTCH112-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the device operates over a 1.8V to 3.6V range. |
| 2 | MTO/INT | output | Active-low detect output and notification interrupt pin, always driven to VDD or VSS; it pulses low for at least 1ms when any state change occurs if no output states are selected in OUTCON. |
| 3 | MTI0 | passive | Proximity/touch sensor input; an additional resistor of at least 4.7k is recommended for best noise immunity, and sensors up to 40 pF are supported. |
| 4 | RESET | input | Active-low device reset input. |
| 5 | SDA | bidirectional | I2C serial data connection; it should be connected to the I2C master SDA with a 1.5k pull-up resistor to VDD. |
| 6 | SCL | input | I2C serial clock connection; it should be connected to the I2C master SCL with a 1.5k pull-up resistor to VDD. |
| 7 | MTI1/MTGRD0 | passive | Proximity/touch sensor input for MTI1, and active guard shield driver for MTI0 that is driven in phase with MTI0 to minimize the voltage differential between the two pins. |
| 8 | VSS | power_in | Ground reference for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | | 1.8 | | 3.6 | V | | 1 |
| Operating Temperature | | -40 | | 85 | oC | | 1 |
## CAD (KiCad official)
- Symbol: `MTCH112-I`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mtch112-i-etched.step` / `mtch112-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mtch112-i.step` / `mtch112-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/41659A.pdf) (6 pp, sha256 `f38657489143fb7b`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mtch112-i-datasheet.pdf)