Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MTCH105-I

Microchip Tech · Touch Sensors · TSSOP-14

MTCH105-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input, operating range 2.05V to 3.6V.
2 MTI0 input Proximity/touch sensor 0 input; a series resistor of at least 4.7 kΩ is recommended for high-frequency noise immunity.
3 MTI1 input Proximity/touch sensor 1 input; a series resistor of at least 4.7 kΩ is recommended for high-frequency noise immunity.
4 MTPM input Low-power mode select: grounding it selects Low-Power mode with slower response, VDD gives higher power consumption with faster response.
5 MTI2/Guard bidirectional Proximity/touch sensor 2 input or active guard output driven in phase with MTIx when enabled by grounding GC (MTO2/GC).
6 MTI3 input Proximity/touch sensor 3 input; a series resistor of at least 4.7 kΩ is recommended for high-frequency noise immunity.
7 MTI4 input Proximity/touch sensor 4 input; a series resistor of at least 4.7 kΩ is recommended for high-frequency noise immunity.
8 MTO4 output Active-low open-drain detect output for MTI4; requires a pull-up resistor.
9 MTO3 output Active-low open-drain detect output for MTI3; requires a pull-up resistor.
10 MTO2/GC bidirectional Active-low open-drain detect output for MTI2 (pull-up required) and guard control: grounding GC enables the active guard signal on the Guard pin.
11 MTSA input Sensitivity adjust input: VDD gives the lowest sensitivity, GND the highest, linear in between, set with a resistor ladder.
12 MTO1 output Active-low open-drain detect output for MTI1; requires a pull-up resistor.
13 MTO0 output Active-low open-drain detect output for MTI0; requires a pull-up resistor.
14 VSS power_in Ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSSOP-14
Category Sensors
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range 2.05 3.6 V Features list; family-wide MTCH102/105/108, not from a table 1
Operating Temperature -40 85 °C Features list; family-wide MTCH102/105/108, not from a table 1

CAD (KiCad official)

  • Symbol: MTCH105-I
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: mtch105-i-etched.step / mtch105-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mtch105-i.step / mtch105-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (7 pp, sha256 587d06cef5395a40, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF