main
Ray
Publish 0.1.0
77a4175
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247
{
"slug": "mtch1030-i",
"version": "0.1.0",
"type": "component",
"description": "Microchip Tech Touch Sensors, QFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"mtch1030-i",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mtch1030-i.kicad_sym",
"mtch1030-i.kicad_mod",
"mtch1030-i.glb",
"mtch1030-i.step",
"mtch1030-i.lbr",
"docs/hero.png",
"docs/mtch1030-i-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mtch1030-i-hero.glb",
"mtch1030-i-hero.overlay.json",
"mtch1030-i-etched.glb"
],
"component": {
"mpn": "MTCH1030-I",
"manufacturer": "Microchip Tech",
"package": "QFN-16(3x3)",
"pin_count": 17,
"category": "Sensors",
"subcategory": "Touch Sensors",
"datasheet": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/MTCH1030-DataSheet-DS40002457.pdf",
"parts": {
"symbol": "mtch1030-i.kicad_sym",
"footprint": "mtch1030-i.kicad_mod",
"model_3d": "mtch1030-i-hero.glb",
"model_3d_plain": "mtch1030-i-etched.glb",
"model_3d_step": "mtch1030-i-etched.step",
"model_3d_step_plain": "mtch1030-i.step",
"lbr": "mtch1030-i.lbr"
},
"distributor_links": {
"lcsc": "C20296404"
},
"distributor_check": {
"checked_at": "2026-10-26T21:42:46Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "OUT2/TUNE_TX",
"type": "output",
"description": "Open-drain (OD/O) touch indication for Button 2, or Tune Data transmit when Tune data is enabled; leave open when unused."
},
{
"number": "2",
"name": "OUT1/TUNE_EN",
"type": "output",
"description": "Open-drain touch indication for Button 1, or Tune Data enable; leave open when unused."
},
{
"number": "3",
"name": "EASY TUNE",
"type": "input",
"description": "Input that enables or disables the Easy Tune feature; connect to VDD if unused."
},
{
"number": "4",
"name": "OUT0",
"type": "output",
"description": "Open-drain touch indication for Button 0; leave open when unused."
},
{
"number": "5",
"name": "BUTTON0",
"type": "input",
"description": "Sensor electrode for Button 0; this pin may not be left open."
},
{
"number": "6",
"name": "BUTTON1",
"type": "input",
"description": "Sensor electrode for Button 1; connect to VDD if unused."
},
{
"number": "7",
"name": "BUTTON2",
"type": "input",
"description": "Sensor electrode for Button 2; connect to VDD if unused."
},
{
"number": "8",
"name": "DRIVEN SHIELD",
"type": "output",
"description": "Shield electrode output driver for the Driven Shield+ function; leave open."
},
{
"number": "9",
"name": "SINGLE-BUTTON",
"type": "input",
"description": "Input that enables or disables the Single-Button mode; connect to VDD if unused."
},
{
"number": "10",
"name": "CFG2",
"type": "input",
"description": "Sensitivity configuration input, giving continuous adjustment from 0V to VDD; this pin may not be left open."
},
{
"number": "11",
"name": "CFG1",
"type": "input",
"description": "Oversampling configuration input, split into four bands (0 to 1/4 VDD, 1/4 to 1/2 VDD, 1/2 to 3/4 VDD, 3/4 to VDD); this pin may not be left open."
},
{
"number": "12",
"name": "CFG0",
"type": "input",
"description": "Response Time (measurement period) configuration input, split into four bands; this pin may not be left open."
},
{
"number": "13",
"name": "VSS",
"type": "power_in",
"description": "Supply ground; the exposed bottom pad is recommended to be connected to VSS but must not be the only VSS connection."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "Not connected; shown as NC in the pin diagram for the QFN package."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "Not connected; shown as NC in the pin diagram for the QFN package."
},
{
"number": "16",
"name": "VDD",
"type": "power_in",
"description": "Power supply input; operation supply voltage is 2 V to 5.5 V per the General Operating Conditions."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The Pin Configuration table lists SINGLE-BUTTON (pin 9) function as 'Enable/Disable Easy Tune featur; The 16-pin QFN has an exposed bottom pad, but the datasheet gives no pin number for it in the text p; The pin diagram (Figure 1-1, page 4) shows pins 14 and 15 as NC, but the Pin Configuration table (pa",
"exposed pad 17 added from the footprint"
],
"pages_sent": 12,
"cost_usd": 0.0546,
"at": "2026-10-26T21:42:31"
},
"datasheet": {
"url": "https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/MTCH1030-DataSheet-DS40002457.pdf",
"pages": 47,
"sha256": "7555081c6e8d14ab",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mtch1030-i.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mtch1030-i-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "4b5190b178701c8d4176445c4b6eb8c114e1245bab08486dc92e380109914530",
"checked": "2026-10-26",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}