main
Ray
Publish 0.1.0
77a4175
MTCH1030-I
Microchip Tech · Touch Sensors · QFN-16(3x3)
MTCH1030-I from Microchip Tech, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2/TUNE_TX | output | Open-drain (OD/O) touch indication for Button 2, or Tune Data transmit when Tune data is enabled; leave open when unused. |
| 2 | OUT1/TUNE_EN | output | Open-drain touch indication for Button 1, or Tune Data enable; leave open when unused. |
| 3 | EASY TUNE | input | Input that enables or disables the Easy Tune feature; connect to VDD if unused. |
| 4 | OUT0 | output | Open-drain touch indication for Button 0; leave open when unused. |
| 5 | BUTTON0 | input | Sensor electrode for Button 0; this pin may not be left open. |
| 6 | BUTTON1 | input | Sensor electrode for Button 1; connect to VDD if unused. |
| 7 | BUTTON2 | input | Sensor electrode for Button 2; connect to VDD if unused. |
| 8 | DRIVEN SHIELD | output | Shield electrode output driver for the Driven Shield+ function; leave open. |
| 9 | SINGLE-BUTTON | input | Input that enables or disables the Single-Button mode; connect to VDD if unused. |
| 10 | CFG2 | input | Sensitivity configuration input, giving continuous adjustment from 0V to VDD; this pin may not be left open. |
| 11 | CFG1 | input | Oversampling configuration input, split into four bands (0 to 1/4 VDD, 1/4 to 1/2 VDD, 1/2 to 3/4 VDD, 3/4 to VDD); this pin may not be left open. |
| 12 | CFG0 | input | Response Time (measurement period) configuration input, split into four bands; this pin may not be left open. |
| 13 | VSS | power_in | Supply ground; the exposed bottom pad is recommended to be connected to VSS but must not be the only VSS connection. |
| 14 | NC | unconnected | Not connected; shown as NC in the pin diagram for the QFN package. |
| 15 | NC | unconnected | Not connected; shown as NC in the pin diagram for the QFN package. |
| 16 | VDD | power_in | Power supply input; operation supply voltage is 2 V to 5.5 V per the General Operating Conditions. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operation supply voltage | VDD | 2 | 5.5 | V | 24 | ||
| Supply ripple noise | 20 | mV p-p | 24 | ||||
| VDD rise rate | SVDD | 0.05 | V/ms | 24 | |||
| Operating temperature range | T | -40 | 85 | °C | Standard temperature range | 24 | |
| Ambient temperature under bias | -40 | 85 | °C | -I grade; printed +85/+125 for -I/-E | 24 | ||
| Storage temperature | TStorage | -65 | 150 | °C | 24 | ||
| Pin voltage to GND | VPin | -0.3 | V | Max printed as VDD + 0.3 V | 24 | ||
| I/O pin sink/source current | IPin | -25 | 25 | mA | 24 | ||
| I/O pin drive strength (low level output) | VOL | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 25 | ||
| Sensor electrode capacitance | CX | 1 | 15 | pF | 25 |
CAD (KiCad official)
- Symbol:
MTCH1030-I - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
mtch1030-i-etched.step/mtch1030-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mtch1030-i.step/mtch1030-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (47 pp, sha256
7555081c6e8d14ab, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MTCH1030-I
**Microchip Tech** · Touch Sensors · QFN-16(3x3)
MTCH1030-I from Microchip Tech, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2/TUNE_TX | output | Open-drain (OD/O) touch indication for Button 2, or Tune Data transmit when Tune data is enabled; leave open when unused. |
| 2 | OUT1/TUNE_EN | output | Open-drain touch indication for Button 1, or Tune Data enable; leave open when unused. |
| 3 | EASY TUNE | input | Input that enables or disables the Easy Tune feature; connect to VDD if unused. |
| 4 | OUT0 | output | Open-drain touch indication for Button 0; leave open when unused. |
| 5 | BUTTON0 | input | Sensor electrode for Button 0; this pin may not be left open. |
| 6 | BUTTON1 | input | Sensor electrode for Button 1; connect to VDD if unused. |
| 7 | BUTTON2 | input | Sensor electrode for Button 2; connect to VDD if unused. |
| 8 | DRIVEN SHIELD | output | Shield electrode output driver for the Driven Shield+ function; leave open. |
| 9 | SINGLE-BUTTON | input | Input that enables or disables the Single-Button mode; connect to VDD if unused. |
| 10 | CFG2 | input | Sensitivity configuration input, giving continuous adjustment from 0V to VDD; this pin may not be left open. |
| 11 | CFG1 | input | Oversampling configuration input, split into four bands (0 to 1/4 VDD, 1/4 to 1/2 VDD, 1/2 to 3/4 VDD, 3/4 to VDD); this pin may not be left open. |
| 12 | CFG0 | input | Response Time (measurement period) configuration input, split into four bands; this pin may not be left open. |
| 13 | VSS | power_in | Supply ground; the exposed bottom pad is recommended to be connected to VSS but must not be the only VSS connection. |
| 14 | NC | unconnected | Not connected; shown as NC in the pin diagram for the QFN package. |
| 15 | NC | unconnected | Not connected; shown as NC in the pin diagram for the QFN package. |
| 16 | VDD | power_in | Power supply input; operation supply voltage is 2 V to 5.5 V per the General Operating Conditions. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operation supply voltage | VDD | 2 | | 5.5 | V | | 24 |
| Supply ripple noise | | | | 20 | mV p-p | | 24 |
| VDD rise rate | SVDD | 0.05 | | | V/ms | | 24 |
| Operating temperature range | T | -40 | | 85 | °C | Standard temperature range | 24 |
| Ambient temperature under bias | | -40 | | 85 | °C | -I grade; printed +85/+125 for -I/-E | 24 |
| Storage temperature | TStorage | -65 | | 150 | °C | | 24 |
| Pin voltage to GND | VPin | -0.3 | | | V | Max printed as VDD + 0.3 V | 24 |
| I/O pin sink/source current | IPin | -25 | | 25 | mA | | 24 |
| I/O pin drive strength (low level output) | VOL | | | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 25 |
| Sensor electrode capacitance | CX | 1 | | 15 | pF | | 25 |
## CAD (KiCad official)
- Symbol: `MTCH1030-I`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files: `mtch1030-i-etched.step` / `mtch1030-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mtch1030-i.step` / `mtch1030-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/MTCH1030-DataSheet-DS40002457.pdf) (47 pp, sha256 `7555081c6e8d14ab`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mtch1030-i-datasheet.pdf)