3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMTCH101-I
Microchip Tech · Touch Sensors · SOT-23-6
MTCH101-I from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MTI | input | Proximity sensor input that connects to the capacitive sensor pad or electrode. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | MTSA | input | Sensitivity adjust input where the voltage sets sensitivity, with VDD giving the lowest and GND the highest sensitivity. |
| 4 | MTO | output | Active-low detect output that behaves as open drain and needs a pull-up resistor (usually 3.3k to 10k) to a voltage no higher than VDD. |
| 5 | VDD | power_in | Power supply input, operating range 2.0V to 5.5V. |
| 6 | MTPM | input | Power mode select input where high selects Normal mode and low selects Low-Power mode, and a state change (pulse of at least 4.5 ms) resets the proximity detection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | 5.5 | V | 11 | ||
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | 11 | |||
| Normal mode response time, highest sensitivity (max) | 150 | ms | Normal mode, VDD = 2.0V | 11 | |||
| Normal mode response time, lowest sensitivity (max) | 260 | ms | Normal mode, VDD = 2.0V | 11 | |||
| Low-Power mode response time, highest sensitivity (max) | 890 | ms | Low-Power mode, VDD = 2.0V | 11 | |||
| Low-Power mode response time, lowest sensitivity (max) | 1000 | ms | Low-Power mode, VDD = 2.0V | 11 | |||
| Normal mode response time, highest sensitivity (max) | 130 | ms | Normal mode, VDD = 3.3V | 11 | |||
| Normal mode response time, lowest sensitivity (max) | 240 | ms | Normal mode, VDD = 3.3V | 11 | |||
| Low-Power mode response time, highest sensitivity (max) | 740 | ms | Low-Power mode, VDD = 3.3V | 11 | |||
| Low-Power mode response time, lowest sensitivity (max) | 850 | ms | Low-Power mode, VDD = 3.3V | 11 | |||
| Normal mode response time, highest sensitivity (max) | 119 | ms | Normal mode, VDD = 5.0V | 11 | |||
| Normal mode response time, lowest sensitivity (max) | 220 | ms | Normal mode, VDD = 5.0V | 11 | |||
| Low-Power mode response time, highest sensitivity (max) | 620 | ms | Low-Power mode, VDD = 5.0V | 11 | |||
| Low-Power mode response time, lowest sensitivity (max) | 730 | ms | Low-Power mode, VDD = 5.0V | 11 | |||
| Operating Ambient Temperature | TA | -40 | 85 | °C | Industrial | 10 | |
| Operating Supply Voltage | VDD | 2 | 5.5 | V | 10 | ||
| Ambient temperature under bias | -40 | 125 | °C | 10 | |||
| Storage temperature | -65 | 150 | °C | 10 | |||
| Voltage on VDD pin with respect to VSS | VDD | 0 | 6.5 | V | 10 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | max is VDD + 0.3V | 10 | |||
| Max current out of VSS pin | 80 | mA | 10 | ||||
| Max current into VDD pin | 80 | mA | 10 | ||||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 10 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 10 | ||
| Max output current sunk by any I/O pin | 25 | mA | 10 | ||||
| Max output current sourced by any I/O pin | 25 | mA | 10 | ||||
| Typical current, Normal mode | 120 | µA | VDD = 2.0V | 11 | |||
| Typical current, Low-Power mode | 30 | µA | VDD = 2.0V | 11 | |||
| Typical current, Normal mode | 200 | µA | VDD = 3.3V | 11 | |||
| Typical current, Low-Power mode | 54 | µA | VDD = 3.3V | 11 | |||
| Typical current, Normal mode | 340 | µA | VDD = 5.0V | 11 | |||
| Typical current, Low-Power mode | 97 | µA | VDD = 5.0V | 11 |
CAD (KiCad official)
- Symbol:
MTCH101-I - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mtch101-i-etched.step/mtch101-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mtch101-i.step/mtch101-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
00aa14024325314d, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).