main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mt9712bs: viewers · Ray
mt9712bs-etched.glb Publish 0.1.0 · Ray
mt9712bs-etched.step mt9712bs: factory component page (tier=lcsc) · Ray
mt9712bs-hero.glb mt9712bs: hero GLB from the etched model (keeps the MPN mark) · Ray
mt9712bs-hero.overlay.json Publish 0.1.0 · Ray
mt9712bs.glb Publish 0.1.0 · Ray
mt9712bs.kicad_mod Publish 0.1.0 · Ray
mt9712bs.kicad_sym Publish 0.1.0 · Ray
mt9712bs.lbr Publish 0.1.0 · Ray
mt9712bs.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MT9712BS

MAXIC Tech · LED Drivers · SOP-8

MT9712BS from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OVP passive OVP setting pin; a resistor ROVP to GND sets the open-circuit protection threshold (grounded: OVP disabled, 10K: 100V, 36K: 160V, 68K: 240V, floating: 325V).
2 GND power_in Chip ground.
3 NC unconnected Floating pin, no connection.
4 HV power_in High-voltage supply pin of the chip; the chip starts at 11V rising and shuts down below 8V falling, with an absolute maximum of 600V.
5 DRAIN passive Drain of the internal 500V power MOSFET (absolute maximum -0.3V to 500V).
6 NC unconnected Floating pin, no connection.
7 PWM input PWM dimming signal input with 0.5 to 4kHz frequency, 2.5V high threshold and 1.2V low threshold (absolute maximum 6V).
8 CS input Current sense pin connected to the sense resistor to ground, with 600mV typical peak current threshold (absolute maximum 6V).

Key specifications

Parameter Value
Manufacturer MAXIC Tech
Package SOP-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Peak current detection threshold VCS_TH 582 600 618 mV HV=15V, TA=25°C 4
HV pin voltage -0.3 600 V 2
DRAIN pin voltage -0.3 500 V 2
CS/PWM/OVP pin voltage -0.3 6 V 2
Soldering temperature 260 °C 10 seconds 2
Maximum power dissipation PDMAX 1 W 2
Storage temperature TSTG -55 150 °C 2
Operating junction temperature TJ -40 150 °C 2
Operating ambient temperature -40 125 °C 2
Input LED current 200 mA VO=180V, <200mA 2
PWM signal frequency FPWM_DIM 0.5 4 KHz HV=15V, TA=25°C 4
Internal HV MOSFET on resistance RDSON 5 Ω VGS=10V/IDS=0.5A 4
Internal HV MOSFET breakdown voltage BVDSS 500 V VGS=0V/IDS=250uA 4
Junction-to-ambient thermal resistance RθJA 128 °C/W TA=25°C, JEDEC 51-3 2
Junction-to-case (package surface) thermal resistance RθJC 90 °C/W TA=25°C, JEDEC 51-3 2
Start-up voltage HVSTART 11 V HV voltage rising 4
Undervoltage lockout HVUVLO 8 V HV voltage falling 4
Standby current ISTB 100 uA PWM=0V 4
Operating current IOP 400 uA FOP=3.3KHz 4
OVP set current IOVP 37 uA 4
Minimum off time TOFF_MIN 2 μs 4
Maximum off time TOFF_MAX 660 μs 4
Maximum on time TON_MAX 40 μs 4
PWM high detection threshold VPWM_H 2.5 V PWM pin voltage rising 4
PWM low detection threshold VPWM_L 1.2 V PWM pin voltage falling 4
CS leading edge blanking time TLEB 400 ns 4
Chip shutdown delay TDELAY 230 ns 4
Over-temperature regulation threshold TOTR 140 °C 4

CAD (KiCad official)

  • Symbol: MT9712BS
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mt9712bs-etched.step / mt9712bs-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt9712bs.step / mt9712bs.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MAXIC Tech datasheet (7 pp, sha256 b3097fef92fa0f34, retrieved 2026-10-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF