Generated by kicad-footprint-generator · KiCad file format 20260206
MT9523CT-20BF5
Magn Tek · Current Sensors · SOP-8
MT9523CT-20BF5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive input current terminal; current applied here flows through the internal 1.0 mΩ conductor path to pins 3 and 4 and is electrically isolated from signal pins 5 to 8 (2.5 kVrms, 1 min). |
| 2 | IP+ | passive | Positive input current terminal, internally tied to pin 1; current applied here flows through the internal 1.0 mΩ conductor path to pins 3 and 4 and is electrically isolated from signal pins 5 to 8 (2.5 kVrms, 1 min). |
| 3 | IP- | passive | Negative input current terminal, the return end of the internal conductor path from pins 1 and 2; it is electrically isolated from signal pins 5 to 8 (2.5 kVrms, 1 min). |
| 4 | IP- | passive | Negative input current terminal, internally tied to pin 3, forming the return end of the internal conductor path from pins 1 and 2; it is electrically isolated from signal pins 5 to 8 (2.5 kVrms, 1 min). |
| 5 | GND | power_in | Signal ground reference for the sensor IC's analog output and reference pins. |
| 6 | VZCR | output | Zero-current reference voltage output; for the fixed-output (F) version it stays at 2.5 V over VCC = 4.5 to 5.5 V and is independent of supply voltage, allowing single-ended or differential measurement with VOUT. |
| 7 | VOUT | output | Analog voltage output proportional to the input current, with zero-current output VOQ of 2.5 V for the bidirectional fixed-output version over VCC = 4.5 to 5.5 V. |
| 8 | VCC | power_in | Supply pin for the 5.0 V version (4.5 to 5.5 V as referenced in the parameter definitions); the datasheet lists 5.0 V/3.3 V DC supply operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电流范围 (Input current range, fixed 5V output, bidirectional) | IPR | -20 | 20 | A | TA=-40~150℃, VCC=5V, 固定输出模式 | 12 | |
| 零电流输出误差 (VOQ-VZCR) | VOE | -5 | 5 | mV | IP=0 A, TA=25°C | 12 | |
| 零电流输出误差 (VOQ-VZCR) | VOE | -20 | 20 | mV | IP=0 A, TA=-40°C to 25°C | 12 | |
| 零电流输出误差 (VOQ-VZCR) | VOE | -15 | 15 | mV | IP=0 A, TA=25°C to 150°C | 12 | |
| 参考输出误差 (VOE_ZCR) | VOE_ZCR | -10 | 10 | mV | TA=25°C | 12 | |
| 参考输出误差 (VOE_ZCR) | VOE_ZCR | -20 | 20 | mV | TA=-40°C to 25°C | 12 | |
| 灵敏度误差 (ESNST) | ESNST | -1 | 1 | % | IP=20A, TA=25°C | 12 | |
| 灵敏度误差 (ESNST) | ESNST | -2.5 | 2.5 | % | IP=20A, TA=-40°C to 25°C | 12 | |
| 灵敏度误差 (ESNST) | ESNST | -2 | 2 | % | IP=20A, TA=25°C to 150°C | 12 | |
| 总输出误差 (ETOT) | ETOT | -1.5 | 1.5 | % | IP=20A, TA=25°C | 12 | |
| 总输出误差 (ETOT) | ETOT | -3.3 | 3.3 | % | IP=20A, TA=-40°C to 25°C | 12 | |
| 总输出误差 (ETOT) | ETOT | -2.6 | 2.6 | % | IP=20A, TA=25°C to 150°C | 12 | |
| 电源电压 | VCC | 4.5 | 5 | 5.5 | V | XXBR5, XXBF5 | 8 |
| 消耗电流 | ICC | 15 | 22 | mA | VCC=5V, TA=25°C | 8 | |
| 模拟输出低电平 | VOL | 0.3 | V | RL>=4.7KΩ | 8 | ||
| 输出电阻负载 (下拉到GND) | RL | 4.7 | KΩ | 下拉到GND | 8 | ||
| 输出电阻负载 (上拉到VCC) | RL | 4.7 | KΩ | 上拉到VCC | 8 | ||
| 输出电容负载 | CL | 0.47 | 1 | nF | OUT to GND | 8 | |
| 参考端电阻负载 (下拉到GND) | RL_ZCR | 4.7 | KΩ | 下拉到GND | 9 | ||
| 参考端电阻负载 (上拉到VCC) | RL_ZCR | 4.7 | KΩ | 上拉到VCC | 9 | ||
| 参考端电容负载 | CL_ZCR | 0.47 | 1 | nF | VZCR to GND | 9 | |
| 非线性误差 | ELIN | -1 | 0.3 | 1 | %F.S. | Full Scale | 9 |
| 电源电压 (absolute maximum) | VCC | 6 | V | 7 | |||
| 电源反向电压 | VRCC | -0.1 | V | 7 | |||
| 输出反向电压 | VROUT | -0.1 | V | 7 | |||
| 持续输出电流(源电流) | IOUT(source) | 40 | mA | 7 | |||
| 持续输出电流(灌电流) | IOUT(sink) | 40 | mA | 7 | |||
| 工作环境温度 | TA | -40 | 150 | ℃ | 7 | ||
| 存储温度 | TS | -50 | 150 | ℃ | 7 | ||
| 结温 | TJ | 165 | ℃ | 7 |
CAD (KiCad official)
- Symbol:
MT9523CT-20BF5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt9523ct-20bf5-etched.step/mt9523ct-20bf5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt9523ct-20bf5.step/mt9523ct-20bf5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (35 pp, sha256
08a948fe97e0d65b, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).