MT9223CT-30BR5

{
  "slug": "mt9223ct-30br5",
  "version": "0.1.0",
  "type": "component",
  "description": "Magn Tek Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "magnetic sensors",
    "mt9223ct-30br5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mt9223ct-30br5.kicad_sym",
    "mt9223ct-30br5.kicad_mod",
    "mt9223ct-30br5.glb",
    "mt9223ct-30br5.step",
    "mt9223ct-30br5.lbr",
    "docs/hero.png",
    "docs/mt9223ct-30br5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mt9223ct-30br5-hero.glb",
    "mt9223ct-30br5-hero.overlay.json",
    "mt9223ct-30br5-etched.glb"
  ],
  "component": {
    "mpn": "MT9223CT-30BR5",
    "manufacturer": "Magn Tek",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Magnetic Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918115124596736",
    "parts": {
      "symbol": "mt9223ct-30br5.kicad_sym",
      "footprint": "mt9223ct-30br5.kicad_mod",
      "model_3d": "mt9223ct-30br5-hero.glb",
      "model_3d_plain": "mt9223ct-30br5-etched.glb",
      "model_3d_step": "mt9223ct-30br5-etched.step",
      "model_3d_step_plain": "mt9223ct-30br5.step",
      "lbr": "mt9223ct-30br5.lbr"
    },
    "distributor_links": {
      "lcsc": "C879636"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T04:14:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Input current positive pin; primary current flows from pins 1 and 2 to pins 3 and 4, with 1.2 mΩ typical internal conductor resistance and the output rising for increasing current."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Input current positive pin, shorted to pin 1 in the typical application circuit, carrying the primary current into the sensor's low-resistance conductor path."
      },
      {
        "number": "3",
        "name": "IP-",
        "type": "passive",
        "description": "Input current negative pin; primary current exits the conductor path here, and pins 3 and 4 are shorted together in the typical application circuit."
      },
      {
        "number": "4",
        "name": "IP-",
        "type": "passive",
        "description": "Input current negative pin, shorted to pin 3 in the typical application circuit, forming the return end of the primary conductor path."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground and reference for the analog output; a 0.1 µF bypass capacitor between VCC and GND is necessary."
      },
      {
        "number": "6",
        "name": "FILTER",
        "type": "passive",
        "description": "Filter pin that sets device bandwidth with an external CFILTER using fc = 1/(2·π·RF·CFILTER), where internal RF is 1.8 kΩ typical; lower bandwidth reduces noise but increases response time."
      },
      {
        "number": "7",
        "name": "VOUT",
        "type": "output",
        "description": "Analog output signal, specified at VOL max 0.3 V and VOH min VCC−0.3 V for RL ≥ 4.7 kΩ, with a capacitive load of 1 to 10 nF to GND."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input, 4.5 V to 5.5 V with 5 V typical and 6 V absolute maximum; the output is ratiometric to this supply."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 3 gives names and descriptions for pins 1 to 8 but no electrical type. Types w; Pins 1/2 (IP+) and 3/4 (IP-) are listed as pairs in the datasheet, and the typical application circu; The top-view pin figures on pages 3 and 5 do not print the numbers beside each pin, so the mapping o"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0811,
        "at": "2026-10-19T04:12:41"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918115124596736",
        "pages": 18,
        "sha256": "a6f5ef9a0d1a103e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mt9223ct-30br5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mt9223ct-30br5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "050005daaf23ba8e6d0c6475f30ffd8666989336ca54a7f81c6baa7cb7d6d1d7",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}