component
MT9223CT-30BR5
Public Made by Adomby adom
Magn Tek Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MT9223CT-30BR5
Magn Tek · Current Sensors · SOP-8
MT9223CT-30BR5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Input current positive pin; primary current flows from pins 1 and 2 to pins 3 and 4, with 1.2 mΩ typical internal conductor resistance and the output rising for increasing current. |
| 2 | IP+ | passive | Input current positive pin, shorted to pin 1 in the typical application circuit, carrying the primary current into the sensor's low-resistance conductor path. |
| 3 | IP- | passive | Input current negative pin; primary current exits the conductor path here, and pins 3 and 4 are shorted together in the typical application circuit. |
| 4 | IP- | passive | Input current negative pin, shorted to pin 3 in the typical application circuit, forming the return end of the primary conductor path. |
| 5 | GND | power_in | Signal ground and reference for the analog output; a 0.1 µF bypass capacitor between VCC and GND is necessary. |
| 6 | FILTER | passive | Filter pin that sets device bandwidth with an external CFILTER using fc = 1/(2·π·RF·CFILTER), where internal RF is 1.8 kΩ typical; lower bandwidth reduces noise but increases response time. |
| 7 | VOUT | output | Analog output signal, specified at VOL max 0.3 V and VOH min VCC−0.3 V for RL ≥ 4.7 kΩ, with a capacitive load of 1 to 10 nF to GND. |
| 8 | VCC | power_in | Power supply input, 4.5 V to 5.5 V with 5 V typical and 6 V absolute maximum; the output is ratiometric to this supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 8 | |
| Supply Current | ICC | 14 | 20 | mA | TA = 25°C | 8 | |
| Response Time | TRESP | 4 | 5 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 8 | |
| Analog Output Low Saturation Level | VOL | 0.3 | V | RL>=4.7KΩ | 8 | ||
| Output CAP Load | CL | 1 | 10 | nF | OUT to GND | 8 | |
| Output RES Load Pull-down to Ground | RL | 4.7 | KΩ | Pull-down to Ground | 8 | ||
| Output RES Load Pull-up to VCC | RL | 4.7 | KΩ | Pull-up to VCC | 8 | ||
| Nonlinearity error | ELIN | -1.5 | 1.5 | % | Through full range of IP | 8 | |
| Ratiometry Sensitivity Error | ERAT_SNST | -1.5 | 1.5 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 8 | |
| Ratiometry Quiescent Voltage Output Error | ERAT_VOQ | -1 | 1 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 8 | |
| Hall Plate Sensitivity Matching | SNST(match) | -1 | 1 | % | TA = 25°C | 9 | |
| Power-On Reset High Voltage | VPORH | 3.75 | 4 | 4.25 | V | TA = 25°C, VCC rising | 9 |
| Optimized Input Current Range | IPR | -30 | 30 | A | 11 | ||
| Zero-Current Output Error | VOE | -10 | 10 | mV | IP=0 A, TA=25°C | 11 | |
| Zero-Current Output Error | VOE | -25 | 25 | mV | IP=0 A, TA=-40°C to 25°C | 11 | |
| Sensitivity Error | ESNST | -1.5 | 1.5 | % | IP=30A, TA=25°C | 11 | |
| Sensitivity Error | ESNST | -2.5 | 2.5 | % | IP=30A, TA=-40°C to 25°C | 11 | |
| Total Output Error | ETOT | -1.9 | 1.9 | % | IP=30A, TA=25°C | 11 | |
| Total Output Error | ETOT | -3.5 | 3.5 | % | IP=30A, TA = -40°C to 25°C | 11 | |
| Supply Voltage (absolute maximum) | VCC | 6 | V | 7 | |||
| Reverse Battery Voltage | VRCC | -0.1 | V | 7 | |||
| Reverse Output Voltage | VROUT | -0.1 | V | 7 | |||
| Continuous Output Current (source) | IOUT(source) | 80 | mA | 7 | |||
| Continuous Output Current (sink) | IOUT(sink) | 40 | mA | 7 | |||
| Operating Ambient Temperature | TA | -40 | 125 | ℃ | 7 | ||
| Storage Temperature | TS | -50 | 150 | ℃ | 7 | ||
| Junction Temperature | TJ | 165 | ℃ | 7 |
CAD (KiCad official)
- Symbol:
MT9223CT-30BR5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt9223ct-30br5-etched.step/mt9223ct-30br5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt9223ct-30br5.step/mt9223ct-30br5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (18 pp, sha256
a6f5ef9a0d1a103e, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT9223CT-30BR5
**Magn Tek** · Current Sensors · SOP-8
MT9223CT-30BR5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Input current positive pin; primary current flows from pins 1 and 2 to pins 3 and 4, with 1.2 mΩ typical internal conductor resistance and the output rising for increasing current. |
| 2 | IP+ | passive | Input current positive pin, shorted to pin 1 in the typical application circuit, carrying the primary current into the sensor's low-resistance conductor path. |
| 3 | IP- | passive | Input current negative pin; primary current exits the conductor path here, and pins 3 and 4 are shorted together in the typical application circuit. |
| 4 | IP- | passive | Input current negative pin, shorted to pin 3 in the typical application circuit, forming the return end of the primary conductor path. |
| 5 | GND | power_in | Signal ground and reference for the analog output; a 0.1 µF bypass capacitor between VCC and GND is necessary. |
| 6 | FILTER | passive | Filter pin that sets device bandwidth with an external CFILTER using fc = 1/(2·π·RF·CFILTER), where internal RF is 1.8 kΩ typical; lower bandwidth reduces noise but increases response time. |
| 7 | VOUT | output | Analog output signal, specified at VOL max 0.3 V and VOH min VCC−0.3 V for RL ≥ 4.7 kΩ, with a capacitive load of 1 to 10 nF to GND. |
| 8 | VCC | power_in | Power supply input, 4.5 V to 5.5 V with 5 V typical and 6 V absolute maximum; the output is ratiometric to this supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | | 8 |
| Supply Current | ICC | | 14 | 20 | mA | TA = 25°C | 8 |
| Response Time | TRESP | | 4 | 5 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 8 |
| Analog Output Low Saturation Level | VOL | | | 0.3 | V | RL>=4.7KΩ | 8 |
| Output CAP Load | CL | | 1 | 10 | nF | OUT to GND | 8 |
| Output RES Load Pull-down to Ground | RL | 4.7 | | | KΩ | Pull-down to Ground | 8 |
| Output RES Load Pull-up to VCC | RL | 4.7 | | | KΩ | Pull-up to VCC | 8 |
| Nonlinearity error | ELIN | -1.5 | | 1.5 | % | Through full range of IP | 8 |
| Ratiometry Sensitivity Error | ERAT_SNST | -1.5 | | 1.5 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 8 |
| Ratiometry Quiescent Voltage Output Error | ERAT_VOQ | -1 | | 1 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 8 |
| Hall Plate Sensitivity Matching | SNST(match) | -1 | | 1 | % | TA = 25°C | 9 |
| Power-On Reset High Voltage | VPORH | 3.75 | 4 | 4.25 | V | TA = 25°C, VCC rising | 9 |
| Optimized Input Current Range | IPR | -30 | | 30 | A | | 11 |
| Zero-Current Output Error | VOE | -10 | | 10 | mV | IP=0 A, TA=25°C | 11 |
| Zero-Current Output Error | VOE | -25 | | 25 | mV | IP=0 A, TA=-40°C to 25°C | 11 |
| Sensitivity Error | ESNST | -1.5 | | 1.5 | % | IP=30A, TA=25°C | 11 |
| Sensitivity Error | ESNST | -2.5 | | 2.5 | % | IP=30A, TA=-40°C to 25°C | 11 |
| Total Output Error | ETOT | -1.9 | | 1.9 | % | IP=30A, TA=25°C | 11 |
| Total Output Error | ETOT | -3.5 | | 3.5 | % | IP=30A, TA = -40°C to 25°C | 11 |
| Supply Voltage (absolute maximum) | VCC | | | 6 | V | | 7 |
| Reverse Battery Voltage | VRCC | -0.1 | | | V | | 7 |
| Reverse Output Voltage | VROUT | -0.1 | | | V | | 7 |
| Continuous Output Current (source) | IOUT(source) | | | 80 | mA | | 7 |
| Continuous Output Current (sink) | IOUT(sink) | | | 40 | mA | | 7 |
| Operating Ambient Temperature | TA | -40 | | 125 | ℃ | | 7 |
| Storage Temperature | TS | -50 | | 150 | ℃ | | 7 |
| Junction Temperature | TJ | | | 165 | ℃ | | 7 |
## CAD (KiCad official)
- Symbol: `MT9223CT-30BR5`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mt9223ct-30br5-etched.step` / `mt9223ct-30br5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt9223ct-30br5.step` / `mt9223ct-30br5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Magn Tek datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918115124596736) (18 pp, sha256 `a6f5ef9a0d1a103e`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt9223ct-30br5-datasheet.pdf)