main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mt9223ct-20ur5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mt9223ct-20ur5: viewers · Ray
mt9223ct-20ur5-etched.fit.json mt9223ct-20ur5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt9223ct-20ur5-etched.glb mt9223ct-20ur5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt9223ct-20ur5-etched.step mt9223ct-20ur5: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt9223ct-20ur5.glb Publish 0.1.0 · Ray
mt9223ct-20ur5.kicad_mod Publish 0.1.0 · Ray
mt9223ct-20ur5.kicad_sym Publish 0.1.0 · Ray
mt9223ct-20ur5.lbr Publish 0.1.0 · Ray
mt9223ct-20ur5.step Publish 0.1.0 · Ray
package.json mt9223ct-20ur5: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json mt9223ct-20ur5: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/mt9223ct-20ur5 · Ray

MT9223CT-20UR5

Magn Tek · Current Sensors · SOP-8

MT9223CT-20UR5 from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Input current positive terminal; primary current enters through pins 1 and 2 with typical conductor resistance 1.2mΩ.
2 IP+ passive Input current positive terminal; primary current enters through pins 1 and 2 with typical conductor resistance 1.2mΩ.
3 IP− passive Input current negative terminal; primary current exits through pins 3 and 4.
4 IP− passive Input current negative terminal; primary current exits through pins 3 and 4.
5 GND power_in Signal ground; provides common reference for analog signal processing and external filter networks.
6 FILTER input Filter bandwidth control pin; connect external RC network to set device cutoff frequency via fc=1/(2πRFCFILTER), internal resistance 1.8kΩ typical.
7 VOUT output Analog output voltage; proportional to input current with 200mV/A sensitivity, output swing 0.5V to 4.5V at 5V supply, 0V to 80mA source current and 40mA sink current capability.
8 VCC power_in Power supply input; 5.0V nominal (operating range 4.5V to 5.5V), maximum 20mA quiescent current draw.

Key specifications

Parameter Value
Manufacturer Magn Tek
Package SOP-8
Category Magnetic Sensors
Pins 8

CAD (KiCad official)

  • Symbol: MT9223CT-20UR5
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mt9223ct-20ur5-etched.step / mt9223ct-20ur5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt9223ct-20ur5.step / mt9223ct-20ur5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Magn Tek datasheet (18 pp, sha256 2857cbdd5996b8ab, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF