main
Ray
Publish 0.1.0
a90fbdc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287
{
"slug": "mt9222wt-65br5",
"version": "0.1.0",
"type": "component",
"description": "Magn Tek Current Sensors, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"mt9222wt-65br5",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mt9222wt-65br5.kicad_sym",
"mt9222wt-65br5.kicad_mod",
"mt9222wt-65br5.glb",
"mt9222wt-65br5.step",
"mt9222wt-65br5.lbr",
"docs/hero.png",
"docs/mt9222wt-65br5-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mt9222wt-65br5-hero.glb",
"mt9222wt-65br5-hero.overlay.json"
],
"component": {
"mpn": "MT9222WT-65BR5",
"manufacturer": "Magn Tek",
"package": "SOP-16-300mil",
"pin_count": 16,
"category": "Sensors",
"subcategory": "Current Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/acf4cdfae8f4c403e10a5f5513076d76.pdf",
"parts": {
"symbol": "mt9222wt-65br5.kicad_sym",
"footprint": "mt9222wt-65br5.kicad_mod",
"model_3d": "mt9222wt-65br5-hero.glb",
"model_3d_plain": "mt9222wt-65br5.glb",
"model_3d_step": "mt9222wt-65br5-etched.step",
"model_3d_step_plain": "mt9222wt-65br5.step",
"lbr": "mt9222wt-65br5.lbr"
},
"distributor_links": {
"lcsc": "C2930877"
},
"distributor_check": {
"checked_at": "2026-11-13T08:57:54Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "IP+",
"type": "passive",
"description": "Input current positive pin: primary current enters here and flows through the internal conductor path (0.85 mΩ typical) to pins 5-8, and the output rises with increasing current in this direction."
},
{
"number": "2",
"name": "IP+",
"type": "passive",
"description": "Input current positive pin: primary current enters here and flows through the internal conductor path (0.85 mΩ typical) to pins 5-8, and the output rises with increasing current in this direction."
},
{
"number": "3",
"name": "IP+",
"type": "passive",
"description": "Input current positive pin: primary current enters here and flows through the internal conductor path (0.85 mΩ typical) to pins 5-8, and the output rises with increasing current in this direction."
},
{
"number": "4",
"name": "IP+",
"type": "passive",
"description": "Input current positive pin: primary current enters here and flows through the internal conductor path (0.85 mΩ typical) to pins 5-8, and the output rises with increasing current in this direction."
},
{
"number": "5",
"name": "IP-",
"type": "passive",
"description": "Input current negative pin: primary current leaves here after flowing from pins 1-4, and this conductor path is electrically isolated from signal pins 9-16 (4.8 kVrms, 1 min dielectric strength)."
},
{
"number": "6",
"name": "IP-",
"type": "passive",
"description": "Input current negative pin: primary current leaves here after flowing from pins 1-4, and this conductor path is electrically isolated from signal pins 9-16 (4.8 kVrms, 1 min dielectric strength)."
},
{
"number": "7",
"name": "IP-",
"type": "passive",
"description": "Input current negative pin: primary current leaves here after flowing from pins 1-4, and this conductor path is electrically isolated from signal pins 9-16 (4.8 kVrms, 1 min dielectric strength)."
},
{
"number": "8",
"name": "IP-",
"type": "passive",
"description": "Input current negative pin: primary current leaves here after flowing from pins 1-4, and this conductor path is electrically isolated from signal pins 9-16 (4.8 kVrms, 1 min dielectric strength)."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "10",
"name": "VCC",
"type": "power_in",
"description": "Power supply input for a single 5 V supply, with a 4.5 V to 5.5 V operating range and absolute maximum of 6 V; a bypass capacitor (0.1 µF in the typical circuit) between VCC and GND is necessary."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "12",
"name": "VOUT",
"type": "output",
"description": "Analog output signal, ratiometric to VCC with quiescent output at 0.5 × VCC, rated for 80 mA source and 40 mA sink, and loaded with 1 nF to 10 nF to GND."
},
{
"number": "13",
"name": "FILTER",
"type": "passive",
"description": "Filter pin to set bandwidth: leave open for the fastest response, or add a filter capacitor to reduce bandwidth at the cost of longer response time, working with the 1.8 kΩ internal filter resistance."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "15",
"name": "GND",
"type": "power_in",
"description": "Signal ground reference for the sensor and output, which must be connected to VCC through the bypass capacitor."
},
{
"number": "16",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The top-view diagram on page 3 is garbled in the text extraction, so pin numbers were taken from the; The MT9222WT-65BR5 variant is listed in the ordering table on page 4 as SOP-16W, ±65 A, 5 V, 30.8 mV; The datasheet gives no separate pin-type classification. Types were assigned using KiCad classes: IP"
],
"pages_sent": 16,
"cost_usd": 0.1049,
"at": "2026-11-13T08:57:39"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/acf4cdfae8f4c403e10a5f5513076d76.pdf",
"pages": 16,
"sha256": "af8620bfcf126083",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mt9222wt-65br5.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mt9222wt-65br5-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ed79311a7774961f61774163e1193e9d0dfa4678186ff5d5550a66acb2946a28",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOP-16W",
"source_page": 15,
"D": {
"nom_mm": 10.3,
"range_mm": [
10.1,
10.5
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
7.4,
7.6
]
},
"E": {
"nom_mm": 10.315,
"range_mm": [
10.0,
10.63
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.5,
"range_mm": [
2.35,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "mt9222wt-65br5.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}