main
Ray Publish 0.1.0 3cde69d
{
  "slug": "mt9222wt-20br5",
  "version": "0.1.0",
  "type": "component",
  "description": "Magn Tek Current Sensors, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "mt9222wt-20br5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mt9222wt-20br5.kicad_sym",
    "mt9222wt-20br5.kicad_mod",
    "mt9222wt-20br5.glb",
    "mt9222wt-20br5.step",
    "mt9222wt-20br5.lbr",
    "docs/hero.png",
    "docs/mt9222wt-20br5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mt9222wt-20br5-hero.glb",
    "mt9222wt-20br5-hero.overlay.json"
  ],
  "component": {
    "mpn": "MT9222WT-20BR5",
    "manufacturer": "Magn Tek",
    "package": "SOP-16-300mil",
    "pin_count": 16,
    "category": "Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/acf4cdfae8f4c403e10a5f5513076d76.pdf",
    "parts": {
      "symbol": "mt9222wt-20br5.kicad_sym",
      "footprint": "mt9222wt-20br5.kicad_mod",
      "model_3d": "mt9222wt-20br5-hero.glb",
      "model_3d_plain": "mt9222wt-20br5.glb",
      "model_3d_step": "mt9222wt-20br5-etched.step",
      "model_3d_step_plain": "mt9222wt-20br5.step",
      "lbr": "mt9222wt-20br5.lbr"
    },
    "distributor_links": {
      "lcsc": "C2930873"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T05:47:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16."
      },
      {
        "number": "3",
        "name": "IP+",
        "type": "passive",
        "description": "Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16."
      },
      {
        "number": "4",
        "name": "IP+",
        "type": "passive",
        "description": "Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16."
      },
      {
        "number": "5",
        "name": "IP-",
        "type": "passive",
        "description": "Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical."
      },
      {
        "number": "6",
        "name": "IP-",
        "type": "passive",
        "description": "Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical."
      },
      {
        "number": "7",
        "name": "IP-",
        "type": "passive",
        "description": "Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical."
      },
      {
        "number": "8",
        "name": "IP-",
        "type": "passive",
        "description": "Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Single 5 V supply input (VCC 4.5-5.5 V, absolute maximum 6 V), which needs a bypass capacitor of 0.1 µF to GND."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "12",
        "name": "VOUT",
        "type": "output",
        "description": "Analog output proportional to the primary current, ratiometric to VCC with a zero-current level of VCC×0.5 for this bidirectional ±20 A part, rated for 80 mA source and 40 mA sink with 1-10 nF load capacitance to GND."
      },
      {
        "number": "13",
        "name": "FILTER",
        "type": "passive",
        "description": "Bandwidth-setting pin where an external filter capacitor with the internal 1.8 kΩ resistor sets fc = 1/(2π·RF·CFILTER), and leaving it open gives the fastest response time."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Signal ground reference for the Hall IC and analog output, to which the VCC bypass capacitor must be connected."
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-number-to-name assignments are taken from the 'No. Name Description' table on page 3 (Figure; Pin descriptions combine the page 3 table with supporting values from other pages (VCC range from pa; The datasheet lists the MT9222WT-20BR5 in the selection table on page 4 as SOP-16W, which confirms t"
        ],
        "pages_sent": 16,
        "cost_usd": 0.1014,
        "at": "2026-11-13T05:47:03"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/acf4cdfae8f4c403e10a5f5513076d76.pdf",
        "pages": 16,
        "sha256": "af8620bfcf126083",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mt9222wt-20br5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mt9222wt-20br5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "27c44b3a3e0253b0631b4895f1ff5bbc24807e6fcdd7bac4a03149ffb9a72bd8",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SOP-16W",
      "source_page": 15,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.315,
        "range_mm": [
          10.0,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.5,
        "range_mm": [
          2.35,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "mt9222wt-20br5.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}