main
Ray
Publish 0.1.0
3cde69d
MT9222WT-20BR5
Magn Tek · Current Sensors · SOP-16-300mil
MT9222WT-20BR5 from Magn Tek, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 2 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 3 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 4 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 5 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 6 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 7 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 8 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 9 | NC | unconnected | No internal connection. |
| 10 | VCC | power_in | Single 5 V supply input (VCC 4.5-5.5 V, absolute maximum 6 V), which needs a bypass capacitor of 0.1 µF to GND. |
| 11 | NC | unconnected | No internal connection. |
| 12 | VOUT | output | Analog output proportional to the primary current, ratiometric to VCC with a zero-current level of VCC×0.5 for this bidirectional ±20 A part, rated for 80 mA source and 40 mA sink with 1-10 nF load capacitance to GND. |
| 13 | FILTER | passive | Bandwidth-setting pin where an external filter capacitor with the internal 1.8 kΩ resistor sets fc = 1/(2π·RF·CFILTER), and leaving it open gives the fastest response time. |
| 14 | NC | unconnected | No internal connection. |
| 15 | GND | power_in | Signal ground reference for the Hall IC and analog output, to which the VCC bypass capacitor must be connected. |
| 16 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Optimized Input Current Range | IPR | -20 | 20 | A | 8 | ||
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 7 | |
| Supply Current | ICC | 14 | 20 | mA | TA = 25°C | 7 | |
| Analog Output Low Saturation Level | VOL | 0.3 | V | RL>=4.7KΩ | 7 | ||
| Output CAP Load | CL | 1 | 10 | nF | OUT to GND | 7 | |
| DC Output resistance | ROUT | 5 | Ω | 7 | |||
| Output RES Load | RL | 4.7 | KΩ | OUT to GND | 7 | ||
| Nonlinearity error | ELIN | -1.5 | 1.5 | % | Through full range of IP | 7 | |
| Ratiometry Sensitivity Error | ERAT_SNST | -1.5 | 1.5 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 7 | |
| Ratiometry Quiescent Voltage Output Error | ERAT_VOQ | -1 | 1 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 7 | |
| Power-On Reset High Voltage | VPORH | 3.75 | 4 | 4.25 | V | TA = 25°C, VCC rising | 8 |
| Zero-Current Output Error | VOE | -10 | 10 | mV | IP=0 A, TA=25°C | 8 | |
| Zero-Current Output Error | VOE | -25 | 25 | mV | IP=0 A, TA=-40°C to 25°C | 8 | |
| Sensitivity Error | ESNST | -1.1 | 1.1 | % | IP=20A, TA=25°C | 8 | |
| Sensitivity Error | ESNST | -2.5 | 2.5 | % | IP=20A, TA=-40°C to 25°C | 8 | |
| Total Output Error | ETOT | -1.5 | 1.5 | % | IP=20A, TA=25°C | 8 | |
| Total Output Error | ETOT | -3.5 | 3.5 | % | IP=20A, TA = -40°C to 25°C | 8 | |
| Hall Plate Sensitivity Matching | SNST(match) | -1 | 1 | % | TA = 25°C | 8 | |
| Sensitivity Error Lifetime Drift | ESNST_DRIFT | -3 | 3 | % | TA=-40~125℃ | 6 | |
| Total Output Error Lifetime Drift | ETOT_DRIFT | -3 | 3 | % | TA=-40~125℃ | 6 | |
| Response Time | TRESP | 4 | 5 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 7 | |
| Supply Voltage Absolute Maximum | VCC | 6 | V | 6 | |||
| Reverse Battery Voltage | VRCC | -0.1 | V | 6 | |||
| Reverse Output Voltage | VROUT | -0.1 | V | 6 | |||
| Continuous Output Current (source) | IOUT(source) | 80 | mA | 6 | |||
| Continuous Output Current (sink) | IOUT(sink) | 40 | mA | 6 | |||
| Operating Ambient Temperature | TA | -40 | 125 | ℃ | 6 | ||
| Storage Temperature | TS | -50 | 150 | ℃ | 6 | ||
| Junction Temperature | TJ | 175 | ℃ | 6 | |||
| Sensitivity | SNST | 100 | mV/A | -20A≤IP≤20A | 8 | ||
| Primary Conductor Resistance | RIP | 0.85 | mΩ | TA = 25°C | 7 | ||
| Internal Bandwidth | BW | 150 | KHz | Small signal -3 dB; CL = 1 nF | 7 | ||
| Power on time | TPO | 190 | us | TA = 25°C, CL = 1nF, IP=IPR(max) applied | 7 | ||
| Rise time | TR | 3 | us | IP = IPR(max), A = 25°C, CL = 1nF | 7 | ||
| Propagation Delay | TPD | 2 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 7 | ||
| Internal filter resistance | RF(int) | 1.8 | KΩ | 7 | |||
| Noise Density | IND | 450 | uA/√Hz | Input-referenced noise density; TA = 25°C, CL = 1 nF | 7 | ||
| Common Mode Field Rejection Ratio | CMFRR | 40 | dB | Uniform external magnetic field | 8 | ||
| Power-On Reset Low Voltage | VPORL | 3.5 | V | TA = 25°C, VCC falling | 8 | ||
| Power-On Reset Hysteresis | VPORHYS | 0.5 | V | TA = 25°C | 8 | ||
| Power-On Reset Release Time | TPORR | 30 | us | TA = 25°C, VCC rising | 8 | ||
| Power-On Reset Analog Delay | TPORA | 5 | us | TA = 25°C, VCC rising | 8 | ||
| Source Current of Over-Current-Limit | ISCLP | 80 | mA | 8 | |||
| Sink Current of Over-Current-Limit | ISCLN | 40 | mA | 8 | |||
| Detect Time for Over-Current-Limit | TSCLD | 7 | us | TA = 25°C, IOUT>ISCLP or IOUT<ISCLN | 8 | ||
| Release Time for Over-Current-Limit | TSCLR | 0.62 | ms | TA = 25°C | 8 |
CAD (KiCad official)
- Symbol:
MT9222WT-20BR5 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mt9222wt-20br5-etched.step/mt9222wt-20br5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt9222wt-20br5.step/mt9222wt-20br5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (16 pp, sha256
af8620bfcf126083, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT9222WT-20BR5
**Magn Tek** · Current Sensors · SOP-16-300mil
MT9222WT-20BR5 from Magn Tek, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 2 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 3 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 4 | IP+ | passive | Positive primary current input terminal; pins 1-4 are shorted together in the application and carry the current that flows to pins 5-8, isolated from the signal pins 9-16. |
| 5 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 6 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 7 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 8 | IP- | passive | Negative primary current return terminal; pins 5-8 are shorted together in the application and receive the current from pins 1-4 through the internal conductor of 0.85 mΩ typical. |
| 9 | NC | unconnected | No internal connection. |
| 10 | VCC | power_in | Single 5 V supply input (VCC 4.5-5.5 V, absolute maximum 6 V), which needs a bypass capacitor of 0.1 µF to GND. |
| 11 | NC | unconnected | No internal connection. |
| 12 | VOUT | output | Analog output proportional to the primary current, ratiometric to VCC with a zero-current level of VCC×0.5 for this bidirectional ±20 A part, rated for 80 mA source and 40 mA sink with 1-10 nF load capacitance to GND. |
| 13 | FILTER | passive | Bandwidth-setting pin where an external filter capacitor with the internal 1.8 kΩ resistor sets fc = 1/(2π·RF·CFILTER), and leaving it open gives the fastest response time. |
| 14 | NC | unconnected | No internal connection. |
| 15 | GND | power_in | Signal ground reference for the Hall IC and analog output, to which the VCC bypass capacitor must be connected. |
| 16 | NC | unconnected | No internal connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-16-300mil |
| Category | Sensors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Optimized Input Current Range | IPR | -20 | | 20 | A | | 8 |
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | | 7 |
| Supply Current | ICC | | 14 | 20 | mA | TA = 25°C | 7 |
| Analog Output Low Saturation Level | VOL | | | 0.3 | V | RL>=4.7KΩ | 7 |
| Output CAP Load | CL | 1 | | 10 | nF | OUT to GND | 7 |
| DC Output resistance | ROUT | | | 5 | Ω | | 7 |
| Output RES Load | RL | 4.7 | | | KΩ | OUT to GND | 7 |
| Nonlinearity error | ELIN | -1.5 | | 1.5 | % | Through full range of IP | 7 |
| Ratiometry Sensitivity Error | ERAT_SNST | -1.5 | | 1.5 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 7 |
| Ratiometry Quiescent Voltage Output Error | ERAT_VOQ | -1 | | 1 | % | VCC = 4.5 to 5.5 V, TA = 25°C | 7 |
| Power-On Reset High Voltage | VPORH | 3.75 | 4 | 4.25 | V | TA = 25°C, VCC rising | 8 |
| Zero-Current Output Error | VOE | -10 | | 10 | mV | IP=0 A, TA=25°C | 8 |
| Zero-Current Output Error | VOE | -25 | | 25 | mV | IP=0 A, TA=-40°C to 25°C | 8 |
| Sensitivity Error | ESNST | -1.1 | | 1.1 | % | IP=20A, TA=25°C | 8 |
| Sensitivity Error | ESNST | -2.5 | | 2.5 | % | IP=20A, TA=-40°C to 25°C | 8 |
| Total Output Error | ETOT | -1.5 | | 1.5 | % | IP=20A, TA=25°C | 8 |
| Total Output Error | ETOT | -3.5 | | 3.5 | % | IP=20A, TA = -40°C to 25°C | 8 |
| Hall Plate Sensitivity Matching | SNST(match) | -1 | | 1 | % | TA = 25°C | 8 |
| Sensitivity Error Lifetime Drift | ESNST_DRIFT | -3 | | 3 | % | TA=-40~125℃ | 6 |
| Total Output Error Lifetime Drift | ETOT_DRIFT | -3 | | 3 | % | TA=-40~125℃ | 6 |
| Response Time | TRESP | | 4 | 5 | us | IP = IPR(max), TA = 25°C, CL = 1nF | 7 |
| Supply Voltage Absolute Maximum | VCC | | | 6 | V | | 6 |
| Reverse Battery Voltage | VRCC | -0.1 | | | V | | 6 |
| Reverse Output Voltage | VROUT | -0.1 | | | V | | 6 |
| Continuous Output Current (source) | IOUT(source) | | | 80 | mA | | 6 |
| Continuous Output Current (sink) | IOUT(sink) | | | 40 | mA | | 6 |
| Operating Ambient Temperature | TA | -40 | | 125 | ℃ | | 6 |
| Storage Temperature | TS | -50 | | 150 | ℃ | | 6 |
| Junction Temperature | TJ | | | 175 | ℃ | | 6 |
| Sensitivity | SNST | | 100 | | mV/A | -20A≤IP≤20A | 8 |
| Primary Conductor Resistance | RIP | | 0.85 | | mΩ | TA = 25°C | 7 |
| Internal Bandwidth | BW | | 150 | | KHz | Small signal -3 dB; CL = 1 nF | 7 |
| Power on time | TPO | | 190 | | us | TA = 25°C, CL = 1nF, IP=IPR(max) applied | 7 |
| Rise time | TR | | 3 | | us | IP = IPR(max), A = 25°C, CL = 1nF | 7 |
| Propagation Delay | TPD | | 2 | | us | IP = IPR(max), TA = 25°C, CL = 1nF | 7 |
| Internal filter resistance | RF(int) | | 1.8 | | KΩ | | 7 |
| Noise Density | IND | | 450 | | uA/√Hz | Input-referenced noise density; TA = 25°C, CL = 1 nF | 7 |
| Common Mode Field Rejection Ratio | CMFRR | | 40 | | dB | Uniform external magnetic field | 8 |
| Power-On Reset Low Voltage | VPORL | | 3.5 | | V | TA = 25°C, VCC falling | 8 |
| Power-On Reset Hysteresis | VPORHYS | | 0.5 | | V | TA = 25°C | 8 |
| Power-On Reset Release Time | TPORR | | 30 | | us | TA = 25°C, VCC rising | 8 |
| Power-On Reset Analog Delay | TPORA | | 5 | | us | TA = 25°C, VCC rising | 8 |
| Source Current of Over-Current-Limit | ISCLP | | 80 | | mA | | 8 |
| Sink Current of Over-Current-Limit | ISCLN | | 40 | | mA | | 8 |
| Detect Time for Over-Current-Limit | TSCLD | | 7 | | us | TA = 25°C, IOUT>ISCLP or IOUT<ISCLN | 8 |
| Release Time for Over-Current-Limit | TSCLR | | 0.62 | | ms | TA = 25°C | 8 |
## CAD (KiCad official)
- Symbol: `MT9222WT-20BR5`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files: `mt9222wt-20br5-etched.step` / `mt9222wt-20br5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt9222wt-20br5.step` / `mt9222wt-20br5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Magn Tek datasheet](docs/mt9222wt-20br5-datasheet.pdf) (16 pp, sha256 `af8620bfcf126083`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt9222wt-20br5-datasheet.pdf)