mt9221ct-10br5

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MT9221CT-10BR5",+    "manufacturer": "Magn Tek",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Current Sensors",+    "parts": {+      "symbol": "mt9221ct-10br5.kicad_sym",+      "footprint": "mt9221ct-10br5.kicad_mod",+      "model_3d": "mt9221ct-10br5-etched.glb",+      "model_3d_plain": "mt9221ct-10br5.glb",+      "model_3d_step": "mt9221ct-10br5-etched.step",+      "model_3d_step_plain": "mt9221ct-10br5.step",+      "lbr": "mt9221ct-10br5.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "IP+",+        "type": "passive",+        "description": "Primary current input positive terminal. Internally tied to pin 2; short pins 1 and 2 together on the board. Part of the low-resistance (1.5 mΩ typ.) isolated primary conductor path with pins 3/4."+      },+      {+        "number": "2",+        "name": "IP+",+        "type": "passive",+        "description": "Primary current input positive terminal. Internally tied to pin 1; short pins 1 and 2 together on the board. Part of the isolated primary conductor path (1.5 mΩ typ.)."+      },+      {+        "number": "3",+        "name": "IP-",+        "type": "passive",+        "description": "Primary current input negative terminal. Internally tied to pin 4; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path."+      },+      {+        "number": "4",+        "name": "IP-",+        "type": "passive",+        "description": "Primary current input negative terminal. Internally tied to pin 3; short pins 3 and 4 together on the board. Return side of the isolated primary conductor path."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Signal ground reference for the low-voltage side of the sensor. Electrically isolated from the primary current conductor pins (2.6 kVrms dielectric isolation, SOP-8)."+      },+      {+        "number": "6",+        "name": "FILTER",+        "type": "passive",+        "description": "Bandwidth-setting filter pin. Connect an external capacitor (CFILTER) to GND to reduce bandwidth and optimize output noise. Internal filter resistance is 1.8 kΩ typical; default internal bandwidth is 150 kHz."+      },+      {+        "number": "7",+        "name": "VOUT",+        "type": "output",+        "description": "Analog output voltage proportional to the primary sensed current. Ratiometric from VCC with quiescent (0 A) output = VCC × 0.5 (2.5 V typ. at 5 V), sensitivity 200 mV/A, output range 0.5 V to VCC-0.3 V, DC output resistance 5 Ω typ. Drive up to 80 mA source / 40 mA sink."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply input, 4.5 V to 5.5 V (5.0 V nominal). ICC = 14 mA typ. (20 mA max). Requires a 0.1 µF bypass capacitor to GND close to the pin. Power-on reset thresholds: VPORH = 4 V typ., VPORL = 3.5 V typ."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}