main
Ray
Publish 0.1.0
0b98cb8
MT7833A
MAXIC Tech · LED Drivers · SOP-8
MT7833A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Output of the internal error amplifier, connected to ground through a capacitor for frequency compensation; the COMP pin is discharged to 0V during undervoltage lockout and must reach 1.4V before normal operation starts. |
| 2 | DSEN | input | Feedback voltage input, fed through a resistor divider from the LED output or the auxiliary winding; limited to -0.3V to 6V, with a 200mV internal reference, 400mV short-circuit threshold and 3.2V overvoltage threshold. |
| 3 | VDD | power_in | Supply pin with a recommended operating range of 9V to 24V; the internal circuit starts at 18V, undervoltage lockout occurs at 9V, the clamp voltage is 24V and the absolute limit is the clamp voltage. |
| 4 | CS | input | Current sense pin with a 1.4V cycle-by-cycle overcurrent threshold; absolute maximum voltage is -0.3V to 6V. |
| 5 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for -0.3V to 550V with a 550V minimum breakdown voltage. |
| 6 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for -0.3V to 550V with a 550V minimum breakdown voltage. |
| 7 | NC | unconnected | No internal connection; the pin is left floating. |
| 8 | GND | power_in | Ground reference pin for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MAXIC Tech |
| Package | SOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 反馈环路的参考电压 | VREF-FB | 196 | 200 | 204 | mV | 闭环测试 | 3 |
| 启动电压 | VSTP | 18 | V | VDD 电压从 0V 升压 | 3 | ||
| 低压保护 | UVLO | 9 | V | VDD 电压从(VSTP+1V)降压 | 3 | ||
| 启动电流 | ISTP | 25 | μA | VDD=16V | 3 | ||
| VDD 钳位电压 | VDD_CLAMP | 24 | V | 3 | |||
| VDD 管脚钳位电流能力 | ICLAMP | 10 | mA | 3 | |||
| 静态电流 | IQ | 1 | mA | 3 | |||
| DSEN 管脚的短路保护阈值 | SCP | 400 | mV | 3 | |||
| DSEN 管脚的过压保护阈值 | OVP | 3.2 | V | 3 | |||
| DSEN 管脚的前端消隐时间 | LEB1 | 2 | uS | 3 | |||
| 最小开关周期 | MinT | 10 | uS | 3 | |||
| CS 管脚的过流保护阈值 | OCP | 1.4 | V | 3 | |||
| CS 管脚的前端消隐时间 | LEB2 | 300 | nS | 3 | |||
| 过温保护 | OTP | 155 | °C | 3 | |||
| 过温保护的迟滞 | Hys-OTP | 15 | °C | 3 | |||
| 内部高压功率管导通阻抗 | Ron | 3 | Ω | VGS=10V/IDS=1.5A | 3 | ||
| 击穿电压 | BVDSS | 550 | V | VGS=0V/IDS=250uA | 3 | ||
| VDD 管脚电压 | -0.3 | V | 上限为 VDD 钳位电压 | 2 | |||
| DRAIN 管脚电压 | -0.3 | 550 | V | 2 | |||
| COMP/CS/DSEN 管脚电压 | -0.3 | 6 | V | 2 | |||
| 焊接温度 | 260 | °C | 10 秒 | 2 | |||
| PDMAX(最大功耗) | PDMAX | 0.8 | W | SOP8 | 2 | ||
| 储存温度 | -55 | 150 | °C | 2 | |||
| 工作电压 | VDD | 9 | 24 | V | 2 | ||
| 工作温度(环境) | -40 | 105 | °C | 环境 | 2 | ||
| 输出功率 | 13 | W | 90VAC~264VAC | 2 | |||
| 输出功率 | 18 | W | 176VAC~264VAC | 2 | |||
| 内部芯片到环境热阻 | RθJA | 128 | °C/W | JEDEC 51-3, 25°C 环境温度 | 2 |
CAD (KiCad official)
- Symbol:
MT7833A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt7833a-etched.step/mt7833a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt7833a.step/mt7833a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MAXIC Tech datasheet (7 pp, sha256
42ff9ec75b094b6a, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT7833A
**MAXIC Tech** · LED Drivers · SOP-8
MT7833A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | output | Output of the internal error amplifier, connected to ground through a capacitor for frequency compensation; the COMP pin is discharged to 0V during undervoltage lockout and must reach 1.4V before normal operation starts. |
| 2 | DSEN | input | Feedback voltage input, fed through a resistor divider from the LED output or the auxiliary winding; limited to -0.3V to 6V, with a 200mV internal reference, 400mV short-circuit threshold and 3.2V overvoltage threshold. |
| 3 | VDD | power_in | Supply pin with a recommended operating range of 9V to 24V; the internal circuit starts at 18V, undervoltage lockout occurs at 9V, the clamp voltage is 24V and the absolute limit is the clamp voltage. |
| 4 | CS | input | Current sense pin with a 1.4V cycle-by-cycle overcurrent threshold; absolute maximum voltage is -0.3V to 6V. |
| 5 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for -0.3V to 550V with a 550V minimum breakdown voltage. |
| 6 | DRAIN | passive | Drain of the internal high-voltage power MOSFET, rated for -0.3V to 550V with a 550V minimum breakdown voltage. |
| 7 | NC | unconnected | No internal connection; the pin is left floating. |
| 8 | GND | power_in | Ground reference pin for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MAXIC Tech |
| Package | SOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 反馈环路的参考电压 | VREF-FB | 196 | 200 | 204 | mV | 闭环测试 | 3 |
| 启动电压 | VSTP | | 18 | | V | VDD 电压从 0V 升压 | 3 |
| 低压保护 | UVLO | | 9 | | V | VDD 电压从(VSTP+1V)降压 | 3 |
| 启动电流 | ISTP | | 25 | | μA | VDD=16V | 3 |
| VDD 钳位电压 | VDD_CLAMP | | 24 | | V | | 3 |
| VDD 管脚钳位电流能力 | ICLAMP | | 10 | | mA | | 3 |
| 静态电流 | IQ | | 1 | | mA | | 3 |
| DSEN 管脚的短路保护阈值 | SCP | | 400 | | mV | | 3 |
| DSEN 管脚的过压保护阈值 | OVP | | 3.2 | | V | | 3 |
| DSEN 管脚的前端消隐时间 | LEB1 | | 2 | | uS | | 3 |
| 最小开关周期 | MinT | | 10 | | uS | | 3 |
| CS 管脚的过流保护阈值 | OCP | | 1.4 | | V | | 3 |
| CS 管脚的前端消隐时间 | LEB2 | | 300 | | nS | | 3 |
| 过温保护 | OTP | | 155 | | °C | | 3 |
| 过温保护的迟滞 | Hys-OTP | | 15 | | °C | | 3 |
| 内部高压功率管导通阻抗 | Ron | | 3 | | Ω | VGS=10V/IDS=1.5A | 3 |
| 击穿电压 | BVDSS | | 550 | | V | VGS=0V/IDS=250uA | 3 |
| VDD 管脚电压 | | -0.3 | | | V | 上限为 VDD 钳位电压 | 2 |
| DRAIN 管脚电压 | | -0.3 | | 550 | V | | 2 |
| COMP/CS/DSEN 管脚电压 | | -0.3 | | 6 | V | | 2 |
| 焊接温度 | | | | 260 | °C | 10 秒 | 2 |
| PDMAX(最大功耗) | PDMAX | | | 0.8 | W | SOP8 | 2 |
| 储存温度 | | -55 | | 150 | °C | | 2 |
| 工作电压 | VDD | 9 | | 24 | V | | 2 |
| 工作温度(环境) | | -40 | | 105 | °C | 环境 | 2 |
| 输出功率 | | | | 13 | W | 90VAC~264VAC | 2 |
| 输出功率 | | | | 18 | W | 176VAC~264VAC | 2 |
| 内部芯片到环境热阻 | RθJA | | 128 | | °C/W | JEDEC 51-3, 25°C 环境温度 | 2 |
## CAD (KiCad official)
- Symbol: `MT7833A`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mt7833a-etched.step` / `mt7833a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt7833a.step` / `mt7833a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MAXIC Tech datasheet](docs/mt7833a-datasheet.pdf) (7 pp, sha256 `42ff9ec75b094b6a`, retrieved 2026-10-28, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt7833a-datasheet.pdf)