main
Ray
Publish 0.1.0
5100dfe
MT7830A
MAXIC Tech · LED Drivers · SOP-8
MT7830A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | passive | Output of the internal error amplifier, connected to ground through a capacitor for frequency compensation. |
| 2 | DSEN | input | Feedback voltage sense input connected through a resistor divider to the LED output or auxiliary winding, with OVP threshold 3.2V and short-circuit threshold 400mV (absolute max -0.3V to 6V). |
| 3 | VDD | power_in | Power supply pin with 18V startup voltage, 9V UVLO, 28V OVP threshold and recommended operating range 9V to 24V. |
| 4 | CS | input | Current sense pin with 1.4V cycle-by-cycle overcurrent threshold (absolute max -0.3V to 6V). |
| 5 | DRV | output | Gate drive output for the external power MOSFET with 200mA max source and 400mA max sink current. |
| 6 | NC | unconnected | No connect, left floating. |
| 7 | GND | power_in | Ground. |
| 8 | NC | unconnected | No connect, left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MAXIC Tech |
| Package | SOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage of feedback loop | VREF-FB | 196 | 200 | 204 | mV | closed loop test, VDD=15V, TA=25°C | 3 |
| Operating voltage | 9 | 24 | V | 2 | |||
| Operating temperature (ambient) | -40 | 105 | °C | 2 | |||
| COMP/CS/DSEN pin voltage | -0.3 | 6 | V | 2 | |||
| Soldering temperature | 260 | °C | 10 seconds | 2 | |||
| Maximum power dissipation | PDMAX | 0.8 | W | 2 | |||
| Storage temperature | -55 | 150 | °C | 2 | |||
| Thermal resistance junction to ambient | RθJA | 128 | °C/W | JEDEC 51-3, 25°C ambient | 2 | ||
| Startup voltage | VSTP | 18 | V | VDD rising from 0V | 3 | ||
| Undervoltage lockout | UVLO | 9 | V | VDD falling from (VSTP+1V) | 3 | ||
| Startup current | ISTP | 25 | μA | VDD=16V | 3 | ||
| VDD overvoltage protection threshold | OVP1 | 28 | V | 3 | |||
| VDD clamp current capability | ICLAMP | 5 | mA | 3 | |||
| Quiescent current | IQ | 1 | mA | 3 | |||
| DSEN short-circuit protection threshold | SCP | 400 | mV | 3 | |||
| DSEN overvoltage protection threshold | OVP2 | 3.2 | V | 3 | |||
| DSEN leading edge blanking time | LEB1 | 2 | uS | 3 | |||
| Minimum switching period | MinT | 10 | uS | 3 | |||
| CS overcurrent protection threshold | OCP | 1.4 | V | 3 | |||
| CS leading edge blanking time | LEB2 | 300 | nS | 3 | |||
| Over-temperature protection | OTP | 155 | °C | 3 | |||
| OTP hysteresis | Hys-OTP | 15 | °C | 3 | |||
| Maximum on time | TON_MAX | 24 | uS | 3 | |||
| Minimum on time | TON_MIN | 300 | nS | 3 | |||
| Maximum off time | TOFF_MAX | 75 | uS | 3 | |||
| Maximum drive pull-up current | ISOURCE | 200 | mA | 3 | |||
| Maximum drive pull-down current | ISINK | 400 | mA | 3 |
CAD (KiCad official)
- Symbol:
MT7830A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt7830a-etched.step/mt7830a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt7830a.step/mt7830a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MAXIC Tech datasheet (7 pp, sha256
5fad7b5e5945519e, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT7830A
**MAXIC Tech** · LED Drivers · SOP-8
MT7830A from MAXIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP | passive | Output of the internal error amplifier, connected to ground through a capacitor for frequency compensation. |
| 2 | DSEN | input | Feedback voltage sense input connected through a resistor divider to the LED output or auxiliary winding, with OVP threshold 3.2V and short-circuit threshold 400mV (absolute max -0.3V to 6V). |
| 3 | VDD | power_in | Power supply pin with 18V startup voltage, 9V UVLO, 28V OVP threshold and recommended operating range 9V to 24V. |
| 4 | CS | input | Current sense pin with 1.4V cycle-by-cycle overcurrent threshold (absolute max -0.3V to 6V). |
| 5 | DRV | output | Gate drive output for the external power MOSFET with 200mA max source and 400mA max sink current. |
| 6 | NC | unconnected | No connect, left floating. |
| 7 | GND | power_in | Ground. |
| 8 | NC | unconnected | No connect, left floating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MAXIC Tech |
| Package | SOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage of feedback loop | VREF-FB | 196 | 200 | 204 | mV | closed loop test, VDD=15V, TA=25°C | 3 |
| Operating voltage | | 9 | | 24 | V | | 2 |
| Operating temperature (ambient) | | -40 | | 105 | °C | | 2 |
| COMP/CS/DSEN pin voltage | | -0.3 | | 6 | V | | 2 |
| Soldering temperature | | | | 260 | °C | 10 seconds | 2 |
| Maximum power dissipation | PDMAX | | | 0.8 | W | | 2 |
| Storage temperature | | -55 | | 150 | °C | | 2 |
| Thermal resistance junction to ambient | RθJA | | 128 | | °C/W | JEDEC 51-3, 25°C ambient | 2 |
| Startup voltage | VSTP | | 18 | | V | VDD rising from 0V | 3 |
| Undervoltage lockout | UVLO | | 9 | | V | VDD falling from (VSTP+1V) | 3 |
| Startup current | ISTP | | 25 | | μA | VDD=16V | 3 |
| VDD overvoltage protection threshold | OVP1 | | 28 | | V | | 3 |
| VDD clamp current capability | ICLAMP | | 5 | | mA | | 3 |
| Quiescent current | IQ | | 1 | | mA | | 3 |
| DSEN short-circuit protection threshold | SCP | | 400 | | mV | | 3 |
| DSEN overvoltage protection threshold | OVP2 | | 3.2 | | V | | 3 |
| DSEN leading edge blanking time | LEB1 | | 2 | | uS | | 3 |
| Minimum switching period | MinT | | 10 | | uS | | 3 |
| CS overcurrent protection threshold | OCP | | 1.4 | | V | | 3 |
| CS leading edge blanking time | LEB2 | | 300 | | nS | | 3 |
| Over-temperature protection | OTP | | 155 | | °C | | 3 |
| OTP hysteresis | Hys-OTP | | 15 | | °C | | 3 |
| Maximum on time | TON_MAX | | 24 | | uS | | 3 |
| Minimum on time | TON_MIN | | 300 | | nS | | 3 |
| Maximum off time | TOFF_MAX | | 75 | | uS | | 3 |
| Maximum drive pull-up current | ISOURCE | | 200 | | mA | | 3 |
| Maximum drive pull-down current | ISINK | | 400 | | mA | | 3 |
## CAD (KiCad official)
- Symbol: `MT7830A`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mt7830a-etched.step` / `mt7830a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt7830a.step` / `mt7830a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MAXIC Tech datasheet](docs/mt7830a-datasheet.pdf) (7 pp, sha256 `5fad7b5e5945519e`, retrieved 2026-10-31, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt7830a-datasheet.pdf)