main
Ray
mt6835gt-std: laser-etched CAD + chip hero (factory 2.0.0 backfill)
3de4a91
MT6835GT-STD
Magn Tek · Signal Switches / Encoders & Decoders / Multiplexers · TSSOP-16
MT6835GT-STD from Magn Tek, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | U | output | Incremental U-phase output (UVW mode) or inverted A output (-A) when configured for differential ABZ mode. Digital push-pull output, VOH ≥ VDD-0.4 V @ -2 mA, VOL ≤ 0.4 V @ 2 mA. |
| 2 | V | output | Incremental V-phase output (UVW mode) or inverted B output (-B) when configured for differential ABZ mode. Digital push-pull output. |
| 3 | W | output | Incremental W-phase output (UVW mode) or inverted Z output (-Z) when configured for differential ABZ mode. Digital push-pull output. |
| 4 | CAL_EN | input | Customer-side auto-calibration enable control pin. Digital input; VIH ≥ 0.8VDD, VIL ≤ 0.2VDD. |
| 5 | MISO | output | SPI data bus - master-in / slave-out. MT6835 drives data to the host MCU. Digital push-pull output. |
| 6 | MOSI | input | SPI data bus - master-out / slave-in. Data received by MT6835 from the host MCU. Digital input; VIH ≥ 0.8VDD, VIL ≤ 0.2VDD. |
| 7 | SCK | input | SPI serial clock input from the host MCU. |
| 8 | CSN | input | SPI chip-select / enable control input, active low. |
| 9 | VDD | power_in | Power supply input, 3.3-5.0 V typical (3.0-5.5 V absolute operating range). Supply current Idd ≈ 15-28 mA (22 mA typ). |
| 10 | OUT | output | PWM output carrying the 12-bit absolute angle (and optional velocity) data. Programmable frequency ~497 Hz or 994 Hz (±8%). Digital push-pull output. |
| 11 | TEST | input | Factory test pin (analog input). For MagnTek internal use only; leave unconnected or per manufacturer guidance. |
| 12 | VSS | power_in | Ground (0 V) reference for the chip. |
| 13 | TEST_EN | input | Factory test enable pin (digital input). For MagnTek internal use only; must be left inactive in customer applications. |
| 14 | Z | output | Incremental encoder Z (index) output. Digital push-pull output; VOH ≥ VDD-0.4 V @ -2 mA, VOL ≤ 0.4 V @ 2 mA. |
| 15 | B | output | Incremental encoder B-channel output. Digital push-pull output; programmable resolution 1-16,384 pulses per revolution. |
| 16 | A | output | Incremental encoder A-channel output. Digital push-pull output; programmable resolution 1-16,384 pulses per revolution, max frequency 2.048 MHz. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
MT6835GT-STDMT6835GT-M5F
CAD (KiCad official)
- Symbol:
MT6835GT-STD - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mt6835gt-std-etched.step/mt6835gt-std-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt6835gt-std.step/mt6835gt-std.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (42 pp, sha256
6134ce0691da4ddf, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MT6835GT-STD
**Magn Tek** · Signal Switches / Encoders & Decoders / Multiplexers · TSSOP-16
MT6835GT-STD from Magn Tek, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | U | output | Incremental U-phase output (UVW mode) or inverted A output (-A) when configured for differential ABZ mode. Digital push-pull output, VOH ≥ VDD-0.4 V @ -2 mA, VOL ≤ 0.4 V @ 2 mA. |
| 2 | V | output | Incremental V-phase output (UVW mode) or inverted B output (-B) when configured for differential ABZ mode. Digital push-pull output. |
| 3 | W | output | Incremental W-phase output (UVW mode) or inverted Z output (-Z) when configured for differential ABZ mode. Digital push-pull output. |
| 4 | CAL_EN | input | Customer-side auto-calibration enable control pin. Digital input; VIH ≥ 0.8*VDD, VIL ≤ 0.2*VDD. |
| 5 | MISO | output | SPI data bus - master-in / slave-out. MT6835 drives data to the host MCU. Digital push-pull output. |
| 6 | MOSI | input | SPI data bus - master-out / slave-in. Data received by MT6835 from the host MCU. Digital input; VIH ≥ 0.8*VDD, VIL ≤ 0.2*VDD. |
| 7 | SCK | input | SPI serial clock input from the host MCU. |
| 8 | CSN | input | SPI chip-select / enable control input, active low. |
| 9 | VDD | power_in | Power supply input, 3.3-5.0 V typical (3.0-5.5 V absolute operating range). Supply current Idd ≈ 15-28 mA (22 mA typ). |
| 10 | OUT | output | PWM output carrying the 12-bit absolute angle (and optional velocity) data. Programmable frequency ~497 Hz or 994 Hz (±8%). Digital push-pull output. |
| 11 | TEST | input | Factory test pin (analog input). For MagnTek internal use only; leave unconnected or per manufacturer guidance. |
| 12 | VSS | power_in | Ground (0 V) reference for the chip. |
| 13 | TEST_EN | input | Factory test enable pin (digital input). For MagnTek internal use only; must be left inactive in customer applications. |
| 14 | Z | output | Incremental encoder Z (index) output. Digital push-pull output; VOH ≥ VDD-0.4 V @ -2 mA, VOL ≤ 0.4 V @ 2 mA. |
| 15 | B | output | Incremental encoder B-channel output. Digital push-pull output; programmable resolution 1-16,384 pulses per revolution. |
| 16 | A | output | Incremental encoder A-channel output. Digital push-pull output; programmable resolution 1-16,384 pulses per revolution, max frequency 2.048 MHz. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
## Ordering variants
Same part, different packaging or reel option.
- `MT6835GT-STD`
- `MT6835GT-M5F`
## CAD (KiCad official)
- Symbol: `MT6835GT-STD`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `mt6835gt-std-etched.step` / `mt6835gt-std-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt6835gt-std.step` / `mt6835gt-std.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Magn Tek datasheet](docs/mt6835gt-std-datasheet.pdf) (42 pp, sha256 `6134ce0691da4ddf`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mt6835gt-std-datasheet.pdf)