← Commit history

Initial commit: component/mt6825gt-m4d

Ray ·cd312f7608 ·
2 files changed +242
README.mdadded+53
@@ -0,0 +1,53 @@+# MT6825GT-M4D++**Magn Tek** · Position Sensors · TSSOP-16++MT6825GT-M4D from Magn Tek, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | U | output | Incremental U signal or differential −A signal output; selected by internal mode register configuration. |+| 2 | V | power_in | Incremental V signal or differential −B signal output; selected by internal mode register configuration. |+| 3 | W | output | Incremental W signal or differential −Z signal output; selected by internal mode register configuration. |+| 4 | HVPP | power_in | MTP programming power supply requiring 7.0-7.2V during MTP write operations; connect directly to ground when MTP programming is not used. |+| 5 | MISO | output | SPI data output line for master-in slave-out; reads angle data and register contents from chip. |+| 6 | MOSI | bidirectional | SPI data input line for master-out slave-in; operates as bidirectional data line in 3-wire SPI mode. |+| 7 | SCK | input | SPI clock input signal; maintain high level during non-communication periods. |+| 8 | CSN | input | SPI chip select enable control pin; active-low; rising edge terminates SPI communication. |+| 9 | VDD | power_in | Power supply input; accepts 3.3-5.0V nominal (3.0-5.5V operating range) DC voltage. |+| 10 | OUT | output | PWM absolute angle output; 12-bit resolution at programmable 971.1Hz or 485.6Hz frequency. |+| 11 | TEST | input | Factory test pin reserved for manufacturer use only. |+| 12 | VSS | power_in | Ground reference; connect to system ground. |+| 13 | ERROR | output | Error output pin; asserts high when magnetic field is too weak or rotation speed exceeds 25,000 RPM limit. |+| 14 | Z | output | Incremental Z signal output; generates one pulse per revolution marking 0° mechanical reference position. |+| 15 | B | output | Incremental B signal output in quadrature with A signal; leads or lags A by 90° depending on rotation direction. |+| 16 | A | output | Incremental A signal output; primary reference signal for ABZ encoder output mode at 1-4,096 pulses/revolution programmable. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Magn Tek |+| Package | TSSOP-16 |+| Category | Sensors |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `MT6825GT-M4D`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `mt6825gt-m4d-etched.step` / `mt6825gt-m4d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mt6825gt-m4d.step` / `mt6825gt-m4d.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Magn Tek datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758144432611049472) (31 pp, sha256 `640d4a1385071ca9`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mt6825gt-m4d-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "mt6825gt-m4d",+  "version": "0.1.0",+  "type": "component",+  "description": "Magn Tek Position Sensors, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "mt6825gt-m4d",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mt6825gt-m4d.kicad_sym",+    "mt6825gt-m4d.kicad_mod",+    "mt6825gt-m4d.glb",+    "mt6825gt-m4d.step",+    "mt6825gt-m4d.lbr",+    "docs/hero.png",+    "docs/mt6825gt-m4d-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MT6825GT-M4D",+    "manufacturer": "Magn Tek",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Sensors",+    "subcategory": "Position Sensors",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758144432611049472",+    "parts": {+      "symbol": "mt6825gt-m4d.kicad_sym",+      "footprint": "mt6825gt-m4d.kicad_mod",+      "model_3d": "mt6825gt-m4d-etched.glb",+      "model_3d_plain": "mt6825gt-m4d.glb",+      "model_3d_step": "mt6825gt-m4d-etched.step",+      "model_3d_step_plain": "mt6825gt-m4d.step",+      "lbr": "mt6825gt-m4d.lbr"+    },+    "distributor_links": {+      "lcsc": "C879563"+    },+    "pins": [+      {+        "number": "1",+        "name": "U",+        "type": "output",+        "description": "Incremental U signal or differential −A signal output; selected by internal mode register configuration."+      },+      {+        "number": "2",+        "name": "V",+        "type": "power_in",+        "description": "Incremental V signal or differential −B signal output; selected by internal mode register configuration."+      },+      {+        "number": "3",+        "name": "W",+        "type": "output",+        "description": "Incremental W signal or differential −Z signal output; selected by internal mode register configuration."+      },+      {+        "number": "4",+        "name": "HVPP",+        "type": "power_in",+        "description": "MTP programming power supply requiring 7.0-7.2V during MTP write operations; connect directly to ground when MTP programming is not used."+      },+      {+        "number": "5",+        "name": "MISO",+        "type": "output",+        "description": "SPI data output line for master-in slave-out; reads angle data and register contents from chip."+      },+      {+        "number": "6",+        "name": "MOSI",+        "type": "bidirectional",+        "description": "SPI data input line for master-out slave-in; operates as bidirectional data line in 3-wire SPI mode."+      },+      {+        "number": "7",+        "name": "SCK",+        "type": "input",+        "description": "SPI clock input signal; maintain high level during non-communication periods."+      },+      {+        "number": "8",+        "name": "CSN",+        "type": "input",+        "description": "SPI chip select enable control pin; active-low; rising edge terminates SPI communication."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input; accepts 3.3-5.0V nominal (3.0-5.5V operating range) DC voltage."+      },+      {+        "number": "10",+        "name": "OUT",+        "type": "output",+        "description": "PWM absolute angle output; 12-bit resolution at programmable 971.1Hz or 485.6Hz frequency."+      },+      {+        "number": "11",+        "name": "TEST",+        "type": "input",+        "description": "Factory test pin reserved for manufacturer use only."+      },+      {+        "number": "12",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference; connect to system ground."+      },+      {+        "number": "13",+        "name": "ERROR",+        "type": "output",+        "description": "Error output pin; asserts high when magnetic field is too weak or rotation speed exceeds 25,000 RPM limit."+      },+      {+        "number": "14",+        "name": "Z",+        "type": "output",+        "description": "Incremental Z signal output; generates one pulse per revolution marking 0° mechanical reference position."+      },+      {+        "number": "15",+        "name": "B",+        "type": "output",+        "description": "Incremental B signal output in quadrature with A signal; leads or lags A by 90° depending on rotation direction."+      },+      {+        "number": "16",+        "name": "A",+        "type": "output",+        "description": "Incremental A signal output; primary reference signal for ABZ encoder output mode at 1-4,096 pulses/revolution programmable."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 31,+        "cost_usd": 0.2177,+        "at": "2026-09-22T07:07:08"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8758144432611049472",+        "pages": 31,+        "sha256": "640d4a1385071ca9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file