component
MT6825GT-M4D
Public Made by Adomby adom
Magn Tek Position Sensors, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMT6825GT-M4D
Magn Tek · Position Sensors · TSSOP-16
MT6825GT-M4D from Magn Tek, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | U | output | Incremental U signal or differential −A signal output; selected by internal mode register configuration. |
| 2 | V | power_in | Incremental V signal or differential −B signal output; selected by internal mode register configuration. |
| 3 | W | output | Incremental W signal or differential −Z signal output; selected by internal mode register configuration. |
| 4 | HVPP | power_in | MTP programming power supply requiring 7.0-7.2V during MTP write operations; connect directly to ground when MTP programming is not used. |
| 5 | MISO | output | SPI data output line for master-in slave-out; reads angle data and register contents from chip. |
| 6 | MOSI | bidirectional | SPI data input line for master-out slave-in; operates as bidirectional data line in 3-wire SPI mode. |
| 7 | SCK | input | SPI clock input signal; maintain high level during non-communication periods. |
| 8 | CSN | input | SPI chip select enable control pin; active-low; rising edge terminates SPI communication. |
| 9 | VDD | power_in | Power supply input; accepts 3.3-5.0V nominal (3.0-5.5V operating range) DC voltage. |
| 10 | OUT | output | PWM absolute angle output; 12-bit resolution at programmable 971.1Hz or 485.6Hz frequency. |
| 11 | TEST | input | Factory test pin reserved for manufacturer use only. |
| 12 | VSS | power_in | Ground reference; connect to system ground. |
| 13 | ERROR | output | Error output pin; asserts high when magnetic field is too weak or rotation speed exceeds 25,000 RPM limit. |
| 14 | Z | output | Incremental Z signal output; generates one pulse per revolution marking 0° mechanical reference position. |
| 15 | B | output | Incremental B signal output in quadrature with A signal; leads or lags A by 90° depending on rotation direction. |
| 16 | A | output | Incremental A signal output; primary reference signal for ABZ encoder output mode at 1-4,096 pulses/revolution programmable. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | TSSOP-16 |
| Category | Sensors |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
MT6825GT-M4D - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mt6825gt-m4d-etched.step/mt6825gt-m4d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt6825gt-m4d.step/mt6825gt-m4d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (31 pp, sha256
640d4a1385071ca9, retrieved 2026-09-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).