main
Ray Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") db3e778
{
  "schema_version": 1,
  "type": "component",
  "slug": "mt6816ct-std-r",
  "title": "MT6816CT-STD-R",
  "brief": "Magn Tek Position Sensor, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "sensor",
    "mt6816ct-std-r"
  ],
  "component": {
    "mpn": "MT6816CT-STD-R",
    "manufacturer": "Magn Tek",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Sensor",
    "subcategory": "Position Sensor",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6dc34c198f172fbc81f2088c2213293d.pdf",
    "parts": {
      "symbol": "mt6816ct-std-r.kicad_sym",
      "footprint": "mt6816ct-std-r.kicad_mod",
      "model_3d": "mt6816ct-std-r.glb",
      "model_3d_step": "mt6816ct-std-r.step",
      "lbr": "mt6816ct-std-r.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "CSN",
        "type": "input",
        "description": "SPI chip-select (active-low) enable pin. Has an internal pull-up (input leakage -100 uA to +1 uA); tie high when SPI is not used. Digital input, VIH >= 0.7*VDD, VIL <= 0.3*VDD."
      },
      {
        "number": "2",
        "name": "HVPP",
        "type": "power_in",
        "description": "Dual-purpose pin: apply 7.0-7.2 V to enable MTP one-time programming; during normal operation tie to VDD to select SPI mode on pins 5/6/7, or tie to GND to select ABZ/UVW output mode. Absolute max 8 V. Bypass with 1 uF when MTP programming is used."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "output",
        "description": "PWM absolute-angle output. Push-pull digital output, VOH >= VDD-0.25 V and VOL <= 0.25 V at Iout=2 mA; typical PWM frequency 971.1 Hz or 485.6 Hz (programmable, +/-8%), rise/fall <= 1 us into 1 nF. Duty cycle encodes the 12-bit absolute angle."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Main supply. Operating range 3.0-5.5 V (typical 3.3-5.0 V); supply current Idd ~ 5 mA typical, 15 mA max. Absolute max 6.5 V. Bypass with 0.1 uF to GND; a 6 V TVS across VDD-GND is recommended."
      },
      {
        "number": "5",
        "name": "A/U/MOSI/SDAT",
        "type": "bidirectional",
        "description": "Muxed I/O. In ABZ mode this pin is incremental output A. In UVW mode it is output U. In 4-wire SPI mode it is MOSI (host-to-chip data). In 3-wire SPI mode it is the bidirectional SDAT line. Push-pull digital I/O, VOH >= VDD-0.25 V, VOL <= 0.25 V at 2 mA; output current +/-20 mA max."
      },
      {
        "number": "6",
        "name": "B/V/MISO",
        "type": "bidirectional",
        "description": "Muxed I/O. In ABZ mode this pin is incremental output B. In UVW mode it is output V. In 4-wire SPI mode it is MISO (chip-to-host data). Not used (no connection) in 3-wire SPI mode. Push-pull digital I/O with the same VOH/VOL and +/-20 mA drive as pin 5."
      },
      {
        "number": "7",
        "name": "Z/W/SCK",
        "type": "bidirectional",
        "description": "Muxed I/O. In ABZ mode this pin is the zero-index Z output (pulse width selectable 1/2/4/8/12/16 LSB or 180°). In UVW mode it is output W. In 3-wire or 4-wire SPI mode it is the SPI serial clock SCK. Push-pull digital I/O with the same VOH/VOL and +/-20 mA drive as pin 5."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / analog + digital return."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/6dc34c198f172fbc81f2088c2213293d.pdf",
        "pages": 30,
        "sha256": "74b66b99a0d6b0e4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Magn Tek",
      "Package": "SOP-8",
      "Category": "Sensor",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "MT6816CT-STD-R",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STT",
      "kind": "unknown"
    },
    {
      "mpn": "MT6816CT-STD-RCT-AKD",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-AKH",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-ACD",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-ACE",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-A9D",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-A400",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-A200",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-A100",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-U7D",
      "kind": "packaging"
    },
    {
      "mpn": "MT6816CT-STD-RCT-U5D",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mt6816ct-std-r"
  ],
  "discovery_pitch": "MT6816CT-STD-R (Magn Tek) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mt6816ct-std-r.kicad_sym",
    "mt6816ct-std-r.kicad_mod",
    "mt6816ct-std-r.glb",
    "mt6816ct-std-r.step",
    "mt6816ct-std-r.lbr",
    "docs/hero.png",
    "docs/mt6816ct-std-r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:34:52.765Z"
}