component
MT6815CT-AAE-R
Public Made by Adomby adom
Magn Tek Position Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMT6815CT-AAE-R
Magn Tek · Position Sensors · SOP-8
MT6815CT-AAE-R from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CSN | input | Protocol selection input for SPI/I2C interface |
| 2 | HVPP | input | OTP programming supply (6.75-7.25V nominal) or protocol configuration input |
| 3 | OUT | output | Analog or PWM output proportional to measured angle, voltage range 0-VDD |
| 4 | VDD | power_in | Power supply input, 3.0-5.5V operating range, 6.0mA typical current drain |
| 5 | A/U | bidirectional | Quadrature A or U-phase incremental output; I2C SDA, SPI MOSI, or 3-Wire SPI SDAT bidirectional data line |
| 6 | B/V | output | Quadrature B direction signal or V-phase incremental output; SPI MISO output in 4-Wire mode |
| 7 | Z/W | bidirectional | Zero-position index or W-phase incremental output; I2C SCL or SPI SCK clock input |
| 8 | GND | power_in | Ground connection |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | SOP-8 |
| Category | Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MT6815CT-AAE-R - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mt6815ct-aae-r-etched.step/mt6815ct-aae-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt6815ct-aae-r.step/mt6815ct-aae-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (28 pp, sha256
8cee6fb9059d89d7, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).