main
History Download
Ray Publish 0.1.0 2a3b6bb

MT6701CT-ACD

Magn Tek · Position Sensor · SOP-8

MT6701CT-ACD from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in 3.3~5.0V power supply (VDD must be >4.5V when programming EEPROM; absolute max 7V).
2 MODE input Digital input with internal 200kΩ pull-up that selects ABZ or I2C/SSI mode.
3 OUT output Analog voltage output or PWM output, selected by the OUT_MODE register.
4 GND power_in Ground.
5 PUSH output Digital output for the push-button function, indicating fast magnetic field changes.
6 A bidirectional Incremental signal A/U, or I2C data line SDA, or SSI data line DO.
7 B bidirectional Incremental signal B/V, or I2C clock SCL, or SSI clock CLK.
8 Z bidirectional Digital I/O with internal 200kΩ pull-up carrying incremental signal Z/W or SSI chip select CSN.

Key specifications

Parameter Value
Manufacturer Magn Tek
Package SOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 5.5 V typ printed as 3.3~5.0 7
Operating current Idd 10 14 mA 7
Integral nonlinearity INL 1 1.5 ° Note [1]; printed ±1.0 typ, ±1.5 max 7
Power-up time TPwrUp 32 ms supply ramp <10us 7
Analog output resistance ROUT 15 30 Ω 7
Pull-up/pull-down resistance RL 10 KΩ 7
Load capacitance CL 1 nF 7
Analog output high saturation voltage VSat_High -0.5 V Iload=1mA; printed VDD-0.5 (min is VDD-0.5) 7
Analog output low saturation voltage VSat_Low 0.5 V Iload=1mA 7
Analog output noise VNoise 0.5 mVrms 25℃, rms, excluding DAC noise 7
Ratiometric error Erm -0.3 0.3 % Note [2] 7
PWM frequency FPWM -5 994.4 5 Hz programmable 994.4/497.2; ±5% @27℃ 7
PWM rise time TRise 1 us CL=1nF 7
PWM fall time TFall 1 us CL=1nF 7
Digital I/O input high level VIH 0.7 V printed 0.7*VDD 8
Digital I/O input low level VIL 0.3 V printed 0.3*VDD 8
Digital I/O output high level VOH -0.5 V push-pull @Iout=2mA; printed VDD-0.5 (min is VDD-0.5) 8
Digital I/O output low level VOL 0.5 V push-pull @Iout=2mA 8
Input leakage current ILK -1 1 uA 8
Digital rise time TRISE 40 ns push-pull, CLoad=20pf 8
Digital fall time TFALL 40 ns push-pull, CLoad=20pf 8
VDD pin voltage (abs max) VDD -0.5 7 V 6
Storage temperature -55 150 ℃ 6
Operating temperature -40 125 ℃ 6
ESD HBM 6 kV Human body model, ± 6
ESD CDM 1.5 kV Charged device model, ± 6
Input magnetic field Bpk 200 1000 Gauss measured at chip surface 9
Air gap AG 0.5 1 2 mm chip surface to magnet 9
Rotation speed RS 55000 RPM 9
Magnet displacement DISP 0.3 mm magnet center to sensing center 9
I2C SCL clock period TSCL 1 μs 21
I2C START hold time THD.STA 250 ns 21
I2C SCL low time TLOW 250 ns 21
I2C SCL high time THIGH 250 ns 21
I2C SDA setup time TSU.DA 100 ns 21
I2C SDA hold time THD.DA 50 ns 21
I2C rise time TR 150 ns SDA/SCL 21
I2C fall time TF 150 ns SDA/SCL 21
I2C STOP setup time TSU.STP 250 ns 21
SSI CSN rising to CLK falling interval TH 100 ns 25
SSI clock period TCLK 64 ns 25
SSI clock low time TCLKL 30 ns 25
SSI clock high time TCLKH 30 ns 25
SSI DO data valid delay TDV 15 ns 20pf load 25
SSI digital rise time TR 10 ns 20pf load 25
SSI digital fall time TF 10 ns 20pf load 25
Differential nonlinearity DNL 0.02 ° ABZ mode, printed ±0.02 7
Transient noise TN 0.01 °rms ABZ mode, 25℃ 7
Hysteresis window Hyst 0.088 ° ABZ mode 7
System delay TDelay 5 us constant speed 7
DAC resolution DAC_LSB 0.0244 %VDD 12-bit DAC 7
Magnet temperature coefficient NdFeB TCmag1 -0.12 %/℃ NdFeB magnet 9
Magnet temperature coefficient SmCo TCmag2 -0.035 %/℃ SmCo magnet 9

CAD (KiCad official)

  • Symbol: MT6701CT-ACD
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mt6701ct-acd-etched.step / mt6701ct-acd-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt6701ct-acd.step / mt6701ct-acd.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Magn Tek datasheet (37 pp, sha256 2e22f871b5963864, retrieved 2026-10-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF