component
MT3602A
Public Made by Adomby adom
Magn Tek Linear Hall Sensors, TO-92S. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMT3602A
Magn Tek · Linear Hall Sensors · TO-92S
MT3602A from Magn Tek, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin, specified from 3.8 V to 24 V with an absolute maximum of -0.5 V to 28 V referenced to GND. |
| 2 | GND | power_in | Ground reference for all voltages on the device, as stated for the absolute maximum ratings. |
| 3 | OUT | output | Open-drain output signal with short-circuit protection, limited to a continuous output current of 50 mA and a voltage of -0.5 V to 28 V, with output saturation voltage of 0.4 V max at 25 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Magn Tek |
| Package | TO-92S |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 3.8 | 24 | V | 3 | ||
| Supply current | IDD | 2 | 6 | mA | 3 | ||
| Output saturation voltage | VSON | 0.4 | V | IOUT=25mA | 3 | ||
| Output leakage current | IOFF | 10 | uA | VOUT=24V | 3 | ||
| Output rise time | TR | 1.5 | us | RL=1KOhm,CL=20pF | 3 | ||
| Output rise time (as printed for TF) | TF | 1.5 | us | RL=1KOhm,CL=20pF | 3 | ||
| Maximum switching frequency | FSW | 20 | KHz | 3 | |||
| Output short circuit current | ISH | 50 | 100 | 150 | mA | 3 | |
| Output short circuit shutdown | TSH | 5 | 12 | 20 | us | 3 | |
| Supply voltage (absolute maximum) | VDD | -0.5 | 28 | V | Referenced to GND | 2 | |
| Continuous output current (absolute maximum) | IOUT | 50 | mA | 2 | |||
| Output voltage (absolute maximum) | VOUT | -0.5 | 28 | V | Referenced to GND | 2 | |
| Operating temperature range | TA | -40 | 150 | °C | 2 | ||
| Storage temperature range | TS | -65 | 170 | °C | 2 | ||
| Back bias range | BBIAS | 10 | 500 | mT | 2 | ||
| Linear region | BLIN | 50 | 400 | mT | 2 | ||
| Hysteresis window | BHYST | 1 | 3 | 5 | mT | 2 | |
| Load resistor RL (recommended) | RL | 1 | 10 | KOhm | 4 | ||
| Distance of air gap (magnet target) | AG | 0.5 | 2.5 | mm | 5 | ||
| Height of tooth (magnet target) | HT | 3 | mm | 5 | |||
| Length of tooth (magnet target) | LT | 3 | mm | 5 | |||
| Width of tooth (magnet target) | WT | 2 | mm | 5 | |||
| Width of valley (magnet target) | WV | 2 | mm | 5 | |||
| TO-92 package thermal resistance | RTH | 230 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The MT3602 is provided in a 3-pin Flat TO-92 that is Pb (lead) free with 100% matt tin plated leadframe | 1 |
CAD (KiCad official)
- Symbol:
MT3602A - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92S (KiCad packages3D, STEP)
- 3D model files:
mt3602a-etched.step/mt3602a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mt3602a.step/mt3602a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Magn Tek datasheet (7 pp, sha256
09eea90d681e72a7, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).