main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mt1401at-en: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mt1401at-en: viewers · Ray
mt1401at-en-etched.fit.json mt1401at-en: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt1401at-en-etched.glb mt1401at-en: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt1401at-en-etched.step mt1401at-en: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mt1401at-en.glb Publish 0.1.0 · Ray
mt1401at-en.kicad_mod Publish 0.1.0 · Ray
mt1401at-en.kicad_sym Publish 0.1.0 · Ray
mt1401at-en.lbr Publish 0.1.0 · Ray
mt1401at-en.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json mt1401at-en: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mt1401at-en: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MT1401AT-EN

Magn Tek · Position Sensor · SOT-23

MT1401AT-EN from Magn Tek, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Positive supply voltage input, 2.8 V to 24 V operating (27 V absolute max). Recommended 100 nF bypass capacitor to GND. Reverse-supply protected to -27 V.
2 OUT output Open-drain digital output. Pulls low (VDSon <= 0.4 V @ 20 mA) when magnetic flux exceeds Bop; releases high (leakage <= 10 uA @ 24 V) when flux drops below Brp. Requires external pull-up (recommended RL 1 k-10 kOhm); internally current-limited to ~50 mA (IOCP).
3 GND power_in Device ground return.

Key specifications

Parameter Value
Manufacturer Magn Tek
Package SOT-23
Category Sensor
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • MT1401AT-EN
  • MT1401ET-EN
  • MT1401A-EN
  • MT1401A-T-EN
  • MT1401BT-EN

CAD (KiCad official)

  • Symbol: MT1401AT-EN
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: mt1401at-en-etched.step / mt1401at-en-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mt1401at-en.step / mt1401at-en.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mt1401at-en.step 59 KB You want the bare part, or you mark your own boards.
mt1401at-en-etched.step 1.2 MB You want the part with MT1401AT-EN already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 343 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Magn Tek datasheet (13 pp, sha256 36688178bd82cf02, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF