main
Ray
Publish 0.1.0
807e37f
MSS1246T-105KLC
Coilcraft · Power Inductors - SMD · Unknown
MSS1246T-105KLC from Coilcraft, in an Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Inductor terminal at the start (short) lead, shown by the dash-number direction mark on the drawing; connect to the high dv/dt node for the lowest EMI. |
| 2 | 2 | passive | Second inductor terminal, on the opposite end of the body from the start lead (land pattern pad 5.5 mm x 4.0 mm, 8.5 mm pad pitch). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | Unknown |
| Category | Power Inductors - SMD |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | L | -10 | 10 | % | K tolerance code, printed as ±10% | 2 | |
| DC resistance (DCR) | DCR | 2090 | 2323 | mOhms | Measured on micro-ohmmeter, Coilcraft CCF858 test fixture (note 3) | 2 | |
| Ambient temperature range | TA | -40 | 125 | °C | With 40°C rise Irms current | 1 | |
| Storage temperature, component | TSTORE | -40 | 165 | °C | Component | 1 | |
| Storage temperature, tape and reel packaging | TSTORE | -40 | 80 | °C | Tape and reel packaging | 1 | |
| Maximum part temperature | 165 | °C | Ambient plus temperature rise; derating applies | 1 | |||
| Resistance to soldering heat | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles | 1 | |||
| Inductance | L | 1000 | µH | Measured at 100 kHz, 0.1 Vrms, 0 Adc, Coilcraft SMD-A fixture (note 2) | 2 | ||
| Self-resonant frequency | SRF | 2.4 | MHz | Agilent/HP 8753D network analyzer, Coilcraft SMD-D fixture (note 4) | 2 | ||
| DC current causing 10% inductance drop | Isat | 0.594 | A | DC current at 25°C causing 10% inductance drop from its value without current (note 5) | 2 | ||
| DC current causing 20% inductance drop | Isat | 0.676 | A | DC current at 25°C causing 20% inductance drop from its value without current (note 5) | 2 | ||
| DC current causing 30% inductance drop | Isat | 0.728 | A | DC current at 25°C causing 30% inductance drop from its value without current (note 5) | 2 | ||
| Irms for 20°C temperature rise | Irms | 0.36 | A | Current causing 20°C temperature rise from 25°C ambient; reference only, not an absolute maximum (note 6) | 2 | ||
| Irms for 40°C temperature rise | Irms | 0.5 | A | Current causing 40°C temperature rise from 25°C ambient; reference only, not an absolute maximum (note 6) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | tin | T = RoHS tin-silver-copper (95.5/4/0.5) or S = nonRoHS tin-lead (63/37). | 2 |
CAD (Adom-generated)
- Symbol:
MSS1246T-105KLC - Footprint:
Adom_Gen:Coilcraft_MSS1246_5acd2b - 3D model: generated to fit the land (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Coilcraft datasheet, copy hosted by Mouser (2 pp, sha256
b6bf9e1e72f9c501, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# MSS1246T-105KLC
**Coilcraft** · Power Inductors - SMD · Unknown
MSS1246T-105KLC from Coilcraft, in an Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Inductor terminal at the start (short) lead, shown by the dash-number direction mark on the drawing; connect to the high dv/dt node for the lowest EMI. |
| 2 | 2 | passive | Second inductor terminal, on the opposite end of the body from the start lead (land pattern pad 5.5 mm x 4.0 mm, 8.5 mm pad pitch). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | Unknown |
| Category | Power Inductors - SMD |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | L | -10 | | 10 | % | K tolerance code, printed as ±10% | 2 |
| DC resistance (DCR) | DCR | | 2090 | 2323 | mOhms | Measured on micro-ohmmeter, Coilcraft CCF858 test fixture (note 3) | 2 |
| Ambient temperature range | TA | -40 | | 125 | °C | With 40°C rise Irms current | 1 |
| Storage temperature, component | TSTORE | -40 | | 165 | °C | Component | 1 |
| Storage temperature, tape and reel packaging | TSTORE | -40 | | 80 | °C | Tape and reel packaging | 1 |
| Maximum part temperature | | | | 165 | °C | Ambient plus temperature rise; derating applies | 1 |
| Resistance to soldering heat | | | | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles | 1 |
| Inductance | L | | 1000 | | µH | Measured at 100 kHz, 0.1 Vrms, 0 Adc, Coilcraft SMD-A fixture (note 2) | 2 |
| Self-resonant frequency | SRF | | 2.4 | | MHz | Agilent/HP 8753D network analyzer, Coilcraft SMD-D fixture (note 4) | 2 |
| DC current causing 10% inductance drop | Isat | | 0.594 | | A | DC current at 25°C causing 10% inductance drop from its value without current (note 5) | 2 |
| DC current causing 20% inductance drop | Isat | | 0.676 | | A | DC current at 25°C causing 20% inductance drop from its value without current (note 5) | 2 |
| DC current causing 30% inductance drop | Isat | | 0.728 | | A | DC current at 25°C causing 30% inductance drop from its value without current (note 5) | 2 |
| Irms for 20°C temperature rise | Irms | | 0.36 | | A | Current causing 20°C temperature rise from 25°C ambient; reference only, not an absolute maximum (note 6) | 2 |
| Irms for 40°C temperature rise | Irms | | 0.5 | | A | Current causing 40°C temperature rise from 25°C ambient; reference only, not an absolute maximum (note 6) | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | tin | T = RoHS tin-silver-copper (95.5/4/0.5) or S = nonRoHS tin-lead (63/37). | 2 |
## CAD (Adom-generated)
- Symbol: `MSS1246T-105KLC`
- Footprint: `Adom_Gen:Coilcraft_MSS1246_5acd2b`
- 3D model: generated to fit the land (STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Coilcraft datasheet, copy hosted by Mouser](https://www.mouser.com/datasheet/3/995/1/mss1246t.pdf) (2 pp, sha256 `b6bf9e1e72f9c501`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/mss1246t-105klc-datasheet.pdf)