← Commit history

Initial commit: component/mspm0l1306srger

Ray ·76eb6eb127 ·
2 files changed +306
README.mdadded+61
@@ -0,0 +1,61 @@+# MSPM0L1306SRGER++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-24(4x4)++MSPM0L1306SRGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PA1 | bidirectional | 5-V tolerant open-drain I/O with wakeup from SHUTDOWN, configurable as I2C0_SCL, UART1_RX, or TIMG1_C1. |+| 2 | NRST | input | Active-low reset input pin; must be pulled high to VCC for device operation. |+| 3 | VDD | power_in | Power supply input with recommended operating voltage range 1.62 V to 3.6 V. |+| 4 | VSS | power_in | Ground supply. |+| 5 | PA2/ROSC | bidirectional | External oscillator frequency correction resistor input (100 kΩ ±0.1% required when FCL enabled) or general-purpose digital I/O. |+| 6 | PA3 | bidirectional | General-purpose digital I/O configurable for TIMG2_C0, SPI0_CS1, UART1_CTS, or COMP0_OUT functions. |+| 7 | PA4 | bidirectional | General-purpose digital I/O configurable for TIMG2_C1, SPI0_POCI, or UART1_RTS functions. |+| 8 | PA9 | bidirectional | General-purpose digital I/O configurable for UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1, or CLK_OUT functions. |+| 9 | PA10 | bidirectional | High-speed general-purpose digital I/O configurable for UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0, or CLK_OUT functions. |+| 10 | PA11 | bidirectional | General-purpose digital I/O configurable for UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1, or COMP0_OUT functions. |+| 11 | PA15/A9 | bidirectional | General-purpose digital I/O or ADC0 analog input 9, configurable for UART1_RTS, I2C1_SCL, SPI0_CS2, or TIMG4_C1 functions. |+| 12 | PA16/A8/OPA1_OUT | bidirectional | General-purpose digital I/O or ADC0 analog input 8, OPA1 output, or Comparator 0 output with multiple peripheral functions. |+| 13 | PA17/OPA1_IN1- | bidirectional | General-purpose digital I/O with wakeup capability, OPA1 inverting terminal input, configurable for UART0_TX, I2C1_SCL, SPI0_SCK, or TIMG4_C0 functions. |+| 14 | PA18/A7/OPA1_IN0+/GPAMP_IN- | bidirectional | General-purpose digital I/O with wakeup capability, ADC0 analog input 7, OPA1 non-inverting input, or GPAMP inverting input with multiple peripheral functions. |+| 15 | PA19/SWDIO | bidirectional | High-speed Serial Wire Debug data I/O pin or general-purpose digital I/O configurable for I2C1_SDA or SPI0_POCI functions. |+| 16 | PA20/A6/COMP0_IN1+/SWCLK | bidirectional | Serial Wire Debug clock input, ADC0 analog input 6, Comparator 0 non-inverting input 1, or general-purpose I/O for I2C/timer functions. |+| 17 | PA21/A5/VREF- | input | External voltage reference ground supply input (required with decoupling capacitor), ADC0 analog input 5, or general-purpose digital I/O. |+| 18 | PA22/A4/GPAMP_OUT/OPA0_OUT | bidirectional | General-purpose digital I/O, ADC0 analog input 4, GPAMP output, or OPA0 output with multiple peripheral functions. |+| 19 | PA23/VREF+ | input | External voltage reference power supply input (requires decoupling capacitor), Comparator 0 inverting input 1, or general-purpose digital I/O. |+| 20 | PA24/A3/OPA0_IN1-/OPA0_IN0- | bidirectional | General-purpose digital I/O, ADC0 analog input 3, OPA0 inverting terminal inputs, configurable for SPI0_CS2, TIMG0_C1, or UART0_RTS functions. |+| 21 | PA25/A2/OPA0_IN0+ | bidirectional | General-purpose digital I/O, ADC0 analog input 2, OPA0 non-inverting terminal input, configurable for TIMG4_C1, UART0_TX, or SPI0_PICO functions. |+| 22 | PA26/A1/GPAMP_IN+/COMP0_IN0+ | bidirectional | General-purpose digital I/O, ADC0 analog input 1, GPAMP non-inverting input, Comparator 0 non-inverting input, configurable for TIMG1_C0, UART0_RX, or SPI0_POCI functions. |+| 23 | VCORE | power_out | Regulated core power supply output (1.35 V nominal) requiring 470 nF decoupling capacitor with no external load. |+| 24 | PA0 | bidirectional | 5-V tolerant open-drain I/O with wakeup from SHUTDOWN, configurable as UART1_TX, I2C0_SDA, TIMG1_C0, or SPI0_CS1 (default BSL I2C_SDA). |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24(4x4) |+| Category | Embedded Processors & Controllers |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `MSPM0L1306SRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)+- 3D model files: `mspm0l1306srger-etched.step` / `mspm0l1306srger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0l1306srger.step` / `mspm0l1306srger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590908814068047872) (85 pp, sha256 `d1eb766306fc0429`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mspm0l1306srger-datasheet.pdf)
page.jsonadded+245
@@ -0,0 +1,245 @@+{+  "slug": "mspm0l1306srger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-24(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "mspm0l1306srger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mspm0l1306srger.kicad_sym",+    "mspm0l1306srger.kicad_mod",+    "mspm0l1306srger.glb",+    "mspm0l1306srger.step",+    "mspm0l1306srger.lbr",+    "docs/hero.png",+    "docs/mspm0l1306srger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MSPM0L1306SRGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24(4x4)",+    "pin_count": 25,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590908814068047872",+    "parts": {+      "symbol": "mspm0l1306srger.kicad_sym",+      "footprint": "mspm0l1306srger.kicad_mod",+      "model_3d": "mspm0l1306srger-etched.glb",+      "model_3d_plain": "mspm0l1306srger.glb",+      "model_3d_step": "mspm0l1306srger-etched.step",+      "model_3d_step_plain": "mspm0l1306srger.step",+      "lbr": "mspm0l1306srger.lbr"+    },+    "distributor_links": {+      "lcsc": "C19189323"+    },+    "pins": [+      {+        "number": "1",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5-V tolerant open-drain I/O with wakeup from SHUTDOWN, configurable as I2C0_SCL, UART1_RX, or TIMG1_C1."+      },+      {+        "number": "2",+        "name": "NRST",+        "type": "input",+        "description": "Active-low reset input pin; must be pulled high to VCC for device operation."+      },+      {+        "number": "3",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input with recommended operating voltage range 1.62 V to 3.6 V."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply."+      },+      {+        "number": "5",+        "name": "PA2/ROSC",+        "type": "bidirectional",+        "description": "External oscillator frequency correction resistor input (100 kΩ ±0.1% required when FCL enabled) or general-purpose digital I/O."+      },+      {+        "number": "6",+        "name": "PA3",+        "type": "bidirectional",+        "description": "General-purpose digital I/O configurable for TIMG2_C0, SPI0_CS1, UART1_CTS, or COMP0_OUT functions."+      },+      {+        "number": "7",+        "name": "PA4",+        "type": "bidirectional",+        "description": "General-purpose digital I/O configurable for TIMG2_C1, SPI0_POCI, or UART1_RTS functions."+      },+      {+        "number": "8",+        "name": "PA9",+        "type": "bidirectional",+        "description": "General-purpose digital I/O configurable for UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1, or CLK_OUT functions."+      },+      {+        "number": "9",+        "name": "PA10",+        "type": "bidirectional",+        "description": "High-speed general-purpose digital I/O configurable for UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0, or CLK_OUT functions."+      },+      {+        "number": "10",+        "name": "PA11",+        "type": "bidirectional",+        "description": "General-purpose digital I/O configurable for UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1, or COMP0_OUT functions."+      },+      {+        "number": "11",+        "name": "PA15/A9",+        "type": "bidirectional",+        "description": "General-purpose digital I/O or ADC0 analog input 9, configurable for UART1_RTS, I2C1_SCL, SPI0_CS2, or TIMG4_C1 functions."+      },+      {+        "number": "12",+        "name": "PA16/A8/OPA1_OUT",+        "type": "bidirectional",+        "description": "General-purpose digital I/O or ADC0 analog input 8, OPA1 output, or Comparator 0 output with multiple peripheral functions."+      },+      {+        "number": "13",+        "name": "PA17/OPA1_IN1-",+        "type": "bidirectional",+        "description": "General-purpose digital I/O with wakeup capability, OPA1 inverting terminal input, configurable for UART0_TX, I2C1_SCL, SPI0_SCK, or TIMG4_C0 functions."+      },+      {+        "number": "14",+        "name": "PA18/A7/OPA1_IN0+/GPAMP_IN-",+        "type": "bidirectional",+        "description": "General-purpose digital I/O with wakeup capability, ADC0 analog input 7, OPA1 non-inverting input, or GPAMP inverting input with multiple peripheral functions."+      },+      {+        "number": "15",+        "name": "PA19/SWDIO",+        "type": "bidirectional",+        "description": "High-speed Serial Wire Debug data I/O pin or general-purpose digital I/O configurable for I2C1_SDA or SPI0_POCI functions."+      },+      {+        "number": "16",+        "name": "PA20/A6/COMP0_IN1+/SWCLK",+        "type": "bidirectional",+        "description": "Serial Wire Debug clock input, ADC0 analog input 6, Comparator 0 non-inverting input 1, or general-purpose I/O for I2C/timer functions."+      },+      {+        "number": "17",+        "name": "PA21/A5/VREF-",+        "type": "input",+        "description": "External voltage reference ground supply input (required with decoupling capacitor), ADC0 analog input 5, or general-purpose digital I/O."+      },+      {+        "number": "18",+        "name": "PA22/A4/GPAMP_OUT/OPA0_OUT",+        "type": "bidirectional",+        "description": "General-purpose digital I/O, ADC0 analog input 4, GPAMP output, or OPA0 output with multiple peripheral functions."+      },+      {+        "number": "19",+        "name": "PA23/VREF+",+        "type": "input",+        "description": "External voltage reference power supply input (requires decoupling capacitor), Comparator 0 inverting input 1, or general-purpose digital I/O."+      },+      {+        "number": "20",+        "name": "PA24/A3/OPA0_IN1-/OPA0_IN0-",+        "type": "bidirectional",+        "description": "General-purpose digital I/O, ADC0 analog input 3, OPA0 inverting terminal inputs, configurable for SPI0_CS2, TIMG0_C1, or UART0_RTS functions."+      },+      {+        "number": "21",+        "name": "PA25/A2/OPA0_IN0+",+        "type": "bidirectional",+        "description": "General-purpose digital I/O, ADC0 analog input 2, OPA0 non-inverting terminal input, configurable for TIMG4_C1, UART0_TX, or SPI0_PICO functions."+      },+      {+        "number": "22",+        "name": "PA26/A1/GPAMP_IN+/COMP0_IN0+",+        "type": "bidirectional",+        "description": "General-purpose digital I/O, ADC0 analog input 1, GPAMP non-inverting input, Comparator 0 non-inverting input, configurable for TIMG1_C0, UART0_RX, or SPI0_POCI functions."+      },+      {+        "number": "23",+        "name": "VCORE",+        "type": "power_out",+        "description": "Regulated core power supply output (1.35 V nominal) requiring 470 nF decoupling capacitor with no external load."+      },+      {+        "number": "24",+        "name": "PA0",+        "type": "bidirectional",+        "description": "5-V tolerant open-drain I/O with wakeup from SHUTDOWN, configurable as UART1_TX, I2C0_SDA, TIMG1_C0, or SPI0_CS1 (default BSL I2C_SDA)."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 85,+        "cost_usd": 1.2427,+        "at": "2026-09-23T03:58:11"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590908814068047872",+        "pages": 85,+        "sha256": "d1eb766306fc0429",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file