main
Ray
Publish 0.1.0
bef7165
MSPM0L1305TRHBR
Texas Instruments · IC · VQFN-32(5x5)
MSPM0L1305TRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | General-purpose 5-V tolerant open-drain I/O with wake up from SHUTDOWN, default BSL I2C_SDA, and an external pullup required for output-high I2C or UART use. |
| 2 | PA1 | bidirectional | General-purpose 5-V tolerant open-drain I/O with wake up from SHUTDOWN, default BSL I2C_SCL, and an external pullup required for output-high I2C or UART use. |
| 3 | NRST | input | Active-low reset input that must be pulled up to VDD for the device to start, with the datasheet recommending a 47-kΩ pullup and 10-nF capacitor. |
| 4 | VDD | power_in | Power supply input with a recommended operating range of 1.62 V to 3.6 V and a 10-µF capacitor between VDD and VSS. |
| 5 | VSS | power_in | Ground supply reference for the device. |
| 6 | PA2 | bidirectional | General-purpose digital I/O that also serves as ROSC, which needs an external 100-kΩ ±0.1% resistor to VSS only when the SYSOSC FCL feature is used. |
| 7 | PA3 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to TIMG2_C0, SPI0_CS1, UART1_CTS and COMP0_OUT. |
| 8 | PA4 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to TIMG2_C1, SPI0_POCI and UART1_RTS. |
| 9 | PA5 | bidirectional | High-speed general-purpose digital I/O that can also be routed to TIMG0_C0, SPI0_PICO and FCC_IN. |
| 10 | PA6 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to TIMG0_C1 and SPI0_SCK. |
| 11 | PA7 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to COMP0_OUT, CLK_OUT and TIMG1_C0. |
| 12 | PA8 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_TX, SPI0_CS0, UART1_RTS and TIMG2_C0. |
| 13 | PA9 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1 and CLK_OUT. |
| 14 | PA10 | bidirectional | High-speed general-purpose digital I/O that can also be routed to UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0 and CLK_OUT. |
| 15 | PA11 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1 and COMP0_OUT. |
| 16 | PA12 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_CTS, TIMG0_C0 and FCC_IN. |
| 17 | PA13 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_RTS, TIMG0_C1 and UART1_RX. |
| 18 | PA14 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART1_CTS, CLK_OUT, UART1_TX and TIMG1_C0. |
| 19 | PA15 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A9 and can be routed to UART1_RTS, I2C1_SCL, SPI0_CS2 and TIMG4_C1. |
| 20 | PA16 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A8 and OPA1_OUT, and can be routed to COMP0_OUT, I2C1_SDA, SPI0_POCI, TIMG0_C0 and FCC_IN. |
| 21 | PA17 | bidirectional | Standard-drive general-purpose digital I/O with wake up from SHUTDOWN that also serves as OPA1_IN1-, and can be routed to UART0_TX, I2C1_SCL, SPI0_SCK and TIMG4_C0. |
| 22 | PA18 | bidirectional | Standard-drive general-purpose digital I/O with wake up from SHUTDOWN that also serves as ADC input A7, OPA1_IN0+ and GPAMP_IN-, and can be routed to UART0_RX, SPI0_PICO, I2C1_SDA, TIMG4_C1 and BSL invoke. |
| 23 | PA19 | bidirectional | High-speed general-purpose digital I/O that also serves as the SWDIO serial wire debug data input/output, and can be routed to I2C1_SDA and SPI0_POCI. |
| 24 | PA20 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A6 and the SWCLK serial wire debug clock input, and can be routed to I2C1_SCL and TIMG4_C0. |
| 25 | PA21 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A5 and the external VREF- reference ground input, and can be routed to TIMG2_C0, UART0_CTS and UART0_TX. |
| 26 | PA22 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A4, GPAMP_OUT and OPA0_OUT, and can be routed to UART0_RX, TIMG2_C1, UART0_RTS, CLK_OUT and UART1_RX, with default BSL UART_RX. |
| 27 | PA23 | bidirectional | Standard-drive general-purpose digital I/O that also serves as the external VREF+ reference input and COMP0_IN1-, and can be routed to UART0_TX, SPI0_CS3, TIMG0_C0, UART0_CTS and UART1_TX, with default BSL UART_TX. |
| 28 | PA24 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A3 and OPA0_IN1- and OPA0_IN0- inputs, and can be routed to SPI0_CS2, TIMG0_C1 and UART0_RTS. |
| 29 | PA25 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A2 and OPA0_IN0+ input, and can be routed to TIMG4_C1, UART0_TX and SPI0_PICO. |
| 30 | PA26 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A1, GPAMP_IN+ and COMP0_IN0+, and can be routed to TIMG1_C0, UART0_RX and SPI0_POCI. |
| 31 | PA27 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A0 and COMP0_IN0-, and can be routed to TIMG1_C1 and SPI0_CS3. |
| 32 | VCORE | power_out | Regulated core power supply output that requires a 470-nF capacitor to VSS and must not be connected to any other circuit or external load. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
MSPM0L1305TRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
mspm0l1305trhbr-etched.step/mspm0l1305trhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0l1305trhbr.step/mspm0l1305trhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (89 pp, sha256
d79bb920f524c429, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSPM0L1305TRHBR
**Texas Instruments** · IC · VQFN-32(5x5)
MSPM0L1305TRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | General-purpose 5-V tolerant open-drain I/O with wake up from SHUTDOWN, default BSL I2C_SDA, and an external pullup required for output-high I2C or UART use. |
| 2 | PA1 | bidirectional | General-purpose 5-V tolerant open-drain I/O with wake up from SHUTDOWN, default BSL I2C_SCL, and an external pullup required for output-high I2C or UART use. |
| 3 | NRST | input | Active-low reset input that must be pulled up to VDD for the device to start, with the datasheet recommending a 47-kΩ pullup and 10-nF capacitor. |
| 4 | VDD | power_in | Power supply input with a recommended operating range of 1.62 V to 3.6 V and a 10-µF capacitor between VDD and VSS. |
| 5 | VSS | power_in | Ground supply reference for the device. |
| 6 | PA2 | bidirectional | General-purpose digital I/O that also serves as ROSC, which needs an external 100-kΩ ±0.1% resistor to VSS only when the SYSOSC FCL feature is used. |
| 7 | PA3 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to TIMG2_C0, SPI0_CS1, UART1_CTS and COMP0_OUT. |
| 8 | PA4 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to TIMG2_C1, SPI0_POCI and UART1_RTS. |
| 9 | PA5 | bidirectional | High-speed general-purpose digital I/O that can also be routed to TIMG0_C0, SPI0_PICO and FCC_IN. |
| 10 | PA6 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to TIMG0_C1 and SPI0_SCK. |
| 11 | PA7 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to COMP0_OUT, CLK_OUT and TIMG1_C0. |
| 12 | PA8 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_TX, SPI0_CS0, UART1_RTS and TIMG2_C0. |
| 13 | PA9 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1 and CLK_OUT. |
| 14 | PA10 | bidirectional | High-speed general-purpose digital I/O that can also be routed to UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0 and CLK_OUT. |
| 15 | PA11 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1 and COMP0_OUT. |
| 16 | PA12 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_CTS, TIMG0_C0 and FCC_IN. |
| 17 | PA13 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART0_RTS, TIMG0_C1 and UART1_RX. |
| 18 | PA14 | bidirectional | Standard-drive general-purpose digital I/O that can also be routed to UART1_CTS, CLK_OUT, UART1_TX and TIMG1_C0. |
| 19 | PA15 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A9 and can be routed to UART1_RTS, I2C1_SCL, SPI0_CS2 and TIMG4_C1. |
| 20 | PA16 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A8 and OPA1_OUT, and can be routed to COMP0_OUT, I2C1_SDA, SPI0_POCI, TIMG0_C0 and FCC_IN. |
| 21 | PA17 | bidirectional | Standard-drive general-purpose digital I/O with wake up from SHUTDOWN that also serves as OPA1_IN1-, and can be routed to UART0_TX, I2C1_SCL, SPI0_SCK and TIMG4_C0. |
| 22 | PA18 | bidirectional | Standard-drive general-purpose digital I/O with wake up from SHUTDOWN that also serves as ADC input A7, OPA1_IN0+ and GPAMP_IN-, and can be routed to UART0_RX, SPI0_PICO, I2C1_SDA, TIMG4_C1 and BSL invoke. |
| 23 | PA19 | bidirectional | High-speed general-purpose digital I/O that also serves as the SWDIO serial wire debug data input/output, and can be routed to I2C1_SDA and SPI0_POCI. |
| 24 | PA20 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A6 and the SWCLK serial wire debug clock input, and can be routed to I2C1_SCL and TIMG4_C0. |
| 25 | PA21 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A5 and the external VREF- reference ground input, and can be routed to TIMG2_C0, UART0_CTS and UART0_TX. |
| 26 | PA22 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A4, GPAMP_OUT and OPA0_OUT, and can be routed to UART0_RX, TIMG2_C1, UART0_RTS, CLK_OUT and UART1_RX, with default BSL UART_RX. |
| 27 | PA23 | bidirectional | Standard-drive general-purpose digital I/O that also serves as the external VREF+ reference input and COMP0_IN1-, and can be routed to UART0_TX, SPI0_CS3, TIMG0_C0, UART0_CTS and UART1_TX, with default BSL UART_TX. |
| 28 | PA24 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A3 and OPA0_IN1- and OPA0_IN0- inputs, and can be routed to SPI0_CS2, TIMG0_C1 and UART0_RTS. |
| 29 | PA25 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A2 and OPA0_IN0+ input, and can be routed to TIMG4_C1, UART0_TX and SPI0_PICO. |
| 30 | PA26 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A1, GPAMP_IN+ and COMP0_IN0+, and can be routed to TIMG1_C0, UART0_RX and SPI0_POCI. |
| 31 | PA27 | bidirectional | Standard-drive general-purpose digital I/O that also serves as ADC input A0 and COMP0_IN0-, and can be routed to TIMG1_C1 and SPI0_CS3. |
| 32 | VCORE | power_out | Regulated core power supply output that requires a 470-nF capacitor to VSS and must not be connected to any other circuit or external load. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
## CAD (KiCad official)
- Symbol: `MSPM0L1305TRHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `mspm0l1305trhbr-etched.step` / `mspm0l1305trhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0l1305trhbr.step` / `mspm0l1305trhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/mspm0l1303.pdf?ts=1695188866235&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fproduct%252Fcn%252FMSPM0L1303) (89 pp, sha256 `d79bb920f524c429`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mspm0l1305trhbr-datasheet.pdf)