MSPM0L1304SRGER

{
  "slug": "mspm0l1304srger",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mspm0l1304srger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mspm0l1304srger.kicad_sym",
    "mspm0l1304srger.kicad_mod",
    "mspm0l1304srger.glb",
    "mspm0l1304srger.step",
    "mspm0l1304srger.lbr",
    "docs/hero.png",
    "docs/mspm0l1304srger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mspm0l1304srger-hero.glb",
    "mspm0l1304srger-hero.overlay.json",
    "mspm0l1304srger-etched.glb"
  ],
  "component": {
    "mpn": "MSPM0L1304SRGER",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24(4x4)",
    "pin_count": 25,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/lit/ds/symlink/mspm0l1303.pdf?ts=1695188866235&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fproduct%252Fcn%252FMSPM0L1303",
    "parts": {
      "symbol": "mspm0l1304srger.kicad_sym",
      "footprint": "mspm0l1304srger.kicad_mod",
      "model_3d": "mspm0l1304srger-hero.glb",
      "model_3d_plain": "mspm0l1304srger-etched.glb",
      "model_3d_step": "mspm0l1304srger-etched.step",
      "model_3d_step_plain": "mspm0l1304srger.step",
      "lbr": "mspm0l1304srger.lbr"
    },
    "distributor_links": {
      "lcsc": "C19189334",
      "digikey": "296-MSPM0L1304SRGERTR-ND",
      "mouser": "595-MSPM0L1304SRGER"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T12:44:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-MSPM0L1304SRGERTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-MSPM0L1304SRGER",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PA1",
        "type": "bidirectional",
        "description": "5-V tolerant open-drain GPIO with wake up from SHUTDOWN, muxed with UART1_RX, I2C0_SCL, TIMG1_C1 and the default BSL I2C clock (BSLSCL); needs a pullup to output high."
      },
      {
        "number": "2",
        "name": "NRST",
        "type": "input",
        "description": "Active-low reset input that must be pulled high to VDD for the device to start."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply, 1.62 V to 3.6 V recommended, with a 10 µF capacitor to VSS."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground supply."
      },
      {
        "number": "5",
        "name": "PA2/ROSC",
        "type": "bidirectional",
        "description": "Standard-drive GPIO also used as ROSC, the external resistor (100 kΩ to VSS) pin that improves SYSOSC accuracy, with TIMG1_C1 and SPI0_CS0 functions."
      },
      {
        "number": "6",
        "name": "PA3",
        "type": "bidirectional",
        "description": "Standard-drive GPIO muxed with TIMG2_C0, SPI0_CS1, UART1_CTS and COMP0_OUT."
      },
      {
        "number": "7",
        "name": "PA4",
        "type": "bidirectional",
        "description": "Standard-drive GPIO muxed with TIMG2_C1, SPI0_POCI and UART1_RTS."
      },
      {
        "number": "8",
        "name": "PA9",
        "type": "bidirectional",
        "description": "Standard-drive GPIO muxed with UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1 and CLK_OUT."
      },
      {
        "number": "9",
        "name": "PA10",
        "type": "bidirectional",
        "description": "High-speed GPIO muxed with UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0 and CLK_OUT."
      },
      {
        "number": "10",
        "name": "PA11",
        "type": "bidirectional",
        "description": "Standard-drive GPIO muxed with UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1 and COMP0_OUT."
      },
      {
        "number": "11",
        "name": "PA15/A9",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 9, muxed with UART1_RTS, I2C1_SCL, SPI0_CS2 and TIMG4_C1."
      },
      {
        "number": "12",
        "name": "PA16/A8",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 8 and OPA1 output, muxed with COMP0_OUT, I2C1_SDA, SPI0_POCI, TIMG0_C0 and FCC_IN."
      },
      {
        "number": "13",
        "name": "PA17",
        "type": "bidirectional",
        "description": "GPIO with wake up from SHUTDOWN and OPA1 inverting input (IN1-, also IN0- on this package), muxed with UART0_TX, I2C1_SCL, SPI0_SCK, TIMG4_C0 and SPI0_CS1."
      },
      {
        "number": "14",
        "name": "PA18/A7",
        "type": "bidirectional",
        "description": "GPIO with wake up from SHUTDOWN, ADC0 analog input 7, OPA1 non-inverting input 0 and GPAMP inverting input, muxed with UART0_RX, SPI0_PICO, I2C1_SDA, TIMG4_C1 and BSL_invoke."
      },
      {
        "number": "15",
        "name": "PA19/SWDIO",
        "type": "bidirectional",
        "description": "High-speed GPIO used as serial wire debug data input/output (SWDIO), muxed with I2C1_SDA and SPI0_POCI."
      },
      {
        "number": "16",
        "name": "PA20/A6/SWCLK",
        "type": "bidirectional",
        "description": "Standard-drive GPIO used as serial wire debug clock input (SWCLK), with ADC0 analog input 6 and comparator 0 non-inverting input 1, muxed with I2C1_SCL and TIMG4_C0."
      },
      {
        "number": "17",
        "name": "PA21",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 5 and VREF- external reference ground input, muxed with TIMG2_C0, UART0_CTS and UART0_TX."
      },
      {
        "number": "18",
        "name": "PA22/A4",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 4, GPAMP output and OPA0 output, muxed with UART0_RX (default BSL UART receive, BSLRX), TIMG2_C1, UART0_RTS, CLK_OUT and UART1_RX."
      },
      {
        "number": "19",
        "name": "PA23",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with VREF+ external reference input and comparator 0 inverting input 1, muxed with UART0_TX (default BSL UART transmit, BSLTX), SPI0_CS3, TIMG0_C0, UART0_CTS and UART1_TX."
      },
      {
        "number": "20",
        "name": "PA24",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 3 and OPA0 inverting inputs, muxed with SPI0_CS2, TIMG0_C1 and UART0_RTS."
      },
      {
        "number": "21",
        "name": "PA25",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 2 and OPA0 non-inverting input 0, muxed with TIMG4_C1, UART0_TX and SPI0_PICO."
      },
      {
        "number": "22",
        "name": "PA26",
        "type": "bidirectional",
        "description": "Standard-drive GPIO with ADC0 analog input 1, GPAMP non-inverting input and comparator 0 non-inverting input 0, muxed with TIMG1_C0, UART0_RX and SPI0_POCI."
      },
      {
        "number": "23",
        "name": "VCORE",
        "type": "power_out",
        "description": "Regulated core supply output that must only connect to a 470 nF capacitor to VSS, with no external voltage or load applied."
      },
      {
        "number": "24",
        "name": "PA0",
        "type": "bidirectional",
        "description": "5-V tolerant open-drain GPIO with wake up from SHUTDOWN, muxed with UART1_TX, I2C0_SDA, TIMG1_C0, SPI0_CS1 and the default BSL I2C data (BSLSDA); needs a pullup to output high."
      },
      {
        "number": "25",
        "name": "QFN Pad",
        "type": "passive",
        "description": "QFN exposed thermal pad; TI recommends connecting it to VSS."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed thermal pad has no printed number in the datasheet (listed only as 'Pad'). I assigned '2; The 24-pin RGE pin-diagram text is scrambled, so I took the pin numbers from the Table 6-1 and Table; The datasheet covers the MSPM0L130x and L134x families. The 24 VQFN column is shared across the fami"
        ],
        "pages_sent": 35,
        "cost_usd": 0.4414,
        "at": "2026-10-23T12:43:50"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/mspm0l1303.pdf?ts=1695188866235&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fproduct%252Fcn%252FMSPM0L1303",
        "pages": 89,
        "sha256": "d79bb920f524c429",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mspm0l1304srger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mspm0l1304srger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c287b063b1456859c592a44945eca741e4568462dfae3756890df3065f14242f",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}