← Commit history

Initial commit: component/mspm0l1303trger

Ray ·618df914e9 ·
2 files changed +321
README.mdadded+61
@@ -0,0 +1,61 @@+# MSPM0L1303TRGER++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-24(4x4)++MSPM0L1303TRGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PA1 | bidirectional | General-purpose I/O with 5-V tolerant open-drain output and wakeup from SHUTDOWN, supports I2C0 clock in BSL mode |+| 2 | NRST | input | Active-low reset input; must be pulled high to VDD via 47kΩ resistor with 10nF capacitor for device operation |+| 3 | VDD | power_in | Power supply input 1.62 V to 3.6 V, requires 10 µF bypass capacitor in parallel with 0.1 µF |+| 4 | VSS | power_in | Ground return supply |+| 5 | PA2/ROSC | bidirectional | General-purpose I/O or external 100kΩ resistor connection for SYSOSC frequency correction loop |+| 6 | PA3 | bidirectional | General-purpose I/O with standard drive strength and hysteresis control |+| 7 | PA4 | bidirectional | General-purpose I/O with standard drive strength and hysteresis control |+| 8 | PA9 | bidirectional | General-purpose I/O with standard drive strength and hysteresis control |+| 9 | PA10 | bidirectional | High-speed general-purpose I/O with maximum 6 mA source/sink current |+| 10 | PA11 | bidirectional | General-purpose I/O with standard drive strength and hysteresis control |+| 11 | PA15/A9 | bidirectional | General-purpose I/O or ADC0 analog input 9, supports I2C1 serial clock and SPI functions |+| 12 | PA16/A8/OPA1_OUT | bidirectional | General-purpose I/O, A8 ADC input, or OPA1 output; supports I2C1 serial data and SPI functions |+| 13 | PA17/OPA1_IN1- | bidirectional | General-purpose I/O with wakeup from SHUTDOWN, OPA1 inverting input 1, or UART/I2C/SPI/Timer functions |+| 14 | PA18/A7/OPA1_IN0+/GPAMP_IN- | bidirectional | General-purpose I/O with wakeup from SHUTDOWN, A7 ADC input, OPA1/GPAMP input, or UART/SPI/I2C/Timer functions |+| 15 | PA19/SWDIO | bidirectional | High-speed general-purpose I/O, Serial wire debug data input/output for 2-pin SWD interface |+| 16 | PA20/A6/SWCLK/COMP0_IN1+ | bidirectional | General-purpose I/O, A6 ADC input, Serial wire debug clock, or COMP0/I2C1/Timer input |+| 17 | PA21/A5/VREF- | bidirectional | General-purpose I/O, A5 ADC input, or external voltage reference ground for ADC/analog peripherals |+| 18 | PA22/A4/GPAMP_OUT/OPA0_OUT | bidirectional | General-purpose I/O, A4 ADC input, GPAMP/OPA0 output, or UART/Timer/Clock output functions |+| 19 | PA23/VREF+/COMP0_IN1- | bidirectional | General-purpose I/O, external voltage reference power supply for ADC/analog peripherals, or COMP0 input |+| 20 | PA24/A3/OPA0_IN1-/OPA0_IN0- | bidirectional | General-purpose I/O, A3 ADC input, OPA0 inverting inputs, or SPI/Timer functions |+| 21 | PA25/A2/OPA0_IN0+ | bidirectional | General-purpose I/O, A2 ADC input, OPA0 non-inverting input, or SPI/UART functions |+| 22 | PA26/A1/GPAMP_IN+/COMP0_IN0+ | bidirectional | General-purpose I/O, A1 ADC input, GPAMP non-inverting input, or COMP0/Timer/UART/SPI functions |+| 23 | VCORE | power_out | Regulated core voltage output (1.35 V nominal); connect only to 470 nF bypass capacitor minimum with ±20% tolerance |+| 24 | PA0 | bidirectional | General-purpose I/O with 5-V tolerant open-drain output and wakeup from SHUTDOWN, supports I2C0 data in BSL mode |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24(4x4) |+| Category | Embedded Processors & Controllers |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `MSPM0L1303TRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)+- 3D model files: `mspm0l1303trger-etched.step` / `mspm0l1303trger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0l1303trger.step` / `mspm0l1303trger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603069997837135872) (85 pp, sha256 `d1eb766306fc0429`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mspm0l1303trger-datasheet.pdf)
page.jsonadded+260
@@ -0,0 +1,260 @@+{+  "slug": "mspm0l1303trger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "mspm0l1303trger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mspm0l1303trger.kicad_sym",+    "mspm0l1303trger.kicad_mod",+    "mspm0l1303trger.glb",+    "mspm0l1303trger.step",+    "mspm0l1303trger.lbr",+    "docs/hero.png",+    "docs/mspm0l1303trger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MSPM0L1303TRGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24(4x4)",+    "pin_count": 25,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603069997837135872",+    "parts": {+      "symbol": "mspm0l1303trger.kicad_sym",+      "footprint": "mspm0l1303trger.kicad_mod",+      "model_3d": "mspm0l1303trger-etched.glb",+      "model_3d_plain": "mspm0l1303trger.glb",+      "model_3d_step": "mspm0l1303trger-etched.step",+      "model_3d_step_plain": "mspm0l1303trger.step",+      "lbr": "mspm0l1303trger.lbr"+    },+    "distributor_links": {+      "lcsc": "C19189319",+      "digikey": "296-MSPM0L1303TRGERTR-ND",+      "mouser": "595-MSPM0L1303TRGER"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T15:54:04Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-MSPM0L1303TRGERTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-MSPM0L1303TRGER",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "PA1",+        "type": "bidirectional",+        "description": "General-purpose I/O with 5-V tolerant open-drain output and wakeup from SHUTDOWN, supports I2C0 clock in BSL mode"+      },+      {+        "number": "2",+        "name": "NRST",+        "type": "input",+        "description": "Active-low reset input; must be pulled high to VDD via 47kΩ resistor with 10nF capacitor for device operation"+      },+      {+        "number": "3",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input 1.62 V to 3.6 V, requires 10 µF bypass capacitor in parallel with 0.1 µF"+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return supply"+      },+      {+        "number": "5",+        "name": "PA2/ROSC",+        "type": "bidirectional",+        "description": "General-purpose I/O or external 100kΩ resistor connection for SYSOSC frequency correction loop"+      },+      {+        "number": "6",+        "name": "PA3",+        "type": "bidirectional",+        "description": "General-purpose I/O with standard drive strength and hysteresis control"+      },+      {+        "number": "7",+        "name": "PA4",+        "type": "bidirectional",+        "description": "General-purpose I/O with standard drive strength and hysteresis control"+      },+      {+        "number": "8",+        "name": "PA9",+        "type": "bidirectional",+        "description": "General-purpose I/O with standard drive strength and hysteresis control"+      },+      {+        "number": "9",+        "name": "PA10",+        "type": "bidirectional",+        "description": "High-speed general-purpose I/O with maximum 6 mA source/sink current"+      },+      {+        "number": "10",+        "name": "PA11",+        "type": "bidirectional",+        "description": "General-purpose I/O with standard drive strength and hysteresis control"+      },+      {+        "number": "11",+        "name": "PA15/A9",+        "type": "bidirectional",+        "description": "General-purpose I/O or ADC0 analog input 9, supports I2C1 serial clock and SPI functions"+      },+      {+        "number": "12",+        "name": "PA16/A8/OPA1_OUT",+        "type": "bidirectional",+        "description": "General-purpose I/O, A8 ADC input, or OPA1 output; supports I2C1 serial data and SPI functions"+      },+      {+        "number": "13",+        "name": "PA17/OPA1_IN1-",+        "type": "bidirectional",+        "description": "General-purpose I/O with wakeup from SHUTDOWN, OPA1 inverting input 1, or UART/I2C/SPI/Timer functions"+      },+      {+        "number": "14",+        "name": "PA18/A7/OPA1_IN0+/GPAMP_IN-",+        "type": "bidirectional",+        "description": "General-purpose I/O with wakeup from SHUTDOWN, A7 ADC input, OPA1/GPAMP input, or UART/SPI/I2C/Timer functions"+      },+      {+        "number": "15",+        "name": "PA19/SWDIO",+        "type": "bidirectional",+        "description": "High-speed general-purpose I/O, Serial wire debug data input/output for 2-pin SWD interface"+      },+      {+        "number": "16",+        "name": "PA20/A6/SWCLK/COMP0_IN1+",+        "type": "bidirectional",+        "description": "General-purpose I/O, A6 ADC input, Serial wire debug clock, or COMP0/I2C1/Timer input"+      },+      {+        "number": "17",+        "name": "PA21/A5/VREF-",+        "type": "bidirectional",+        "description": "General-purpose I/O, A5 ADC input, or external voltage reference ground for ADC/analog peripherals"+      },+      {+        "number": "18",+        "name": "PA22/A4/GPAMP_OUT/OPA0_OUT",+        "type": "bidirectional",+        "description": "General-purpose I/O, A4 ADC input, GPAMP/OPA0 output, or UART/Timer/Clock output functions"+      },+      {+        "number": "19",+        "name": "PA23/VREF+/COMP0_IN1-",+        "type": "bidirectional",+        "description": "General-purpose I/O, external voltage reference power supply for ADC/analog peripherals, or COMP0 input"+      },+      {+        "number": "20",+        "name": "PA24/A3/OPA0_IN1-/OPA0_IN0-",+        "type": "bidirectional",+        "description": "General-purpose I/O, A3 ADC input, OPA0 inverting inputs, or SPI/Timer functions"+      },+      {+        "number": "21",+        "name": "PA25/A2/OPA0_IN0+",+        "type": "bidirectional",+        "description": "General-purpose I/O, A2 ADC input, OPA0 non-inverting input, or SPI/UART functions"+      },+      {+        "number": "22",+        "name": "PA26/A1/GPAMP_IN+/COMP0_IN0+",+        "type": "bidirectional",+        "description": "General-purpose I/O, A1 ADC input, GPAMP non-inverting input, or COMP0/Timer/UART/SPI functions"+      },+      {+        "number": "23",+        "name": "VCORE",+        "type": "power_out",+        "description": "Regulated core voltage output (1.35 V nominal); connect only to 470 nF bypass capacitor minimum with ±20% tolerance"+      },+      {+        "number": "24",+        "name": "PA0",+        "type": "bidirectional",+        "description": "General-purpose I/O with 5-V tolerant open-drain output and wakeup from SHUTDOWN, supports I2C0 data in BSL mode"+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Figure 6-5 pin diagram labeling differs from Table 6-1 pin attribute values; proceeded with Table 6-",+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 29,+        "cost_usd": 0.3844,+        "at": "2026-10-01T15:53:46"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603069997837135872",+        "pages": 85,+        "sha256": "d1eb766306fc0429",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file