component
MSPM0L1105TRHBR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# MSPM0L1105TRHBR++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-32(5x5)++MSPM0L1105TRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PA0 | bidirectional | GPIO, 5-V tolerant open-drain, supports UART1_TX, I2C0_SDA, TIMG1_C0, SPI0_CS1; wake from SHUTDOWN |+| 2 | PA1 | bidirectional | GPIO, 5-V tolerant open-drain, supports UART1_RX, I2C0_SCL, TIMG1_C1; wake from SHUTDOWN |+| 3 | NRST | input | Reset input, active-low, must be pulled to VDD for device operation |+| 4 | VDD | power_in | Supply voltage input, 1.62V to 3.6V; requires 10µF bulk and 0.1µF bypass capacitors |+| 5 | VSS | power_in | Ground reference, system ground connection point |+| 6 | PA2 | bidirectional | GPIO or ROSC external resistor (100kΩ, 0.1% tolerance) for oscillator trimming, supports TIMG1_C1, SPI0_CS0 |+| 7 | PA3 | bidirectional | GPIO supporting TIMG2_C0, SPI0_CS1, UART1_CTS functions |+| 8 | PA4 | bidirectional | GPIO supporting TIMG2_C1, SPI0_POCI, UART1_RTS functions |+| 9 | PA5 | bidirectional | High-speed GPIO supporting TIMG0_C0, SPI0_PICO, FCC_IN functions |+| 10 | PA6 | bidirectional | GPIO supporting TIMG0_C1, SPI0_SCK functions |+| 11 | PA7 | bidirectional | GPIO supporting CLK_OUT, TIMG1_C0 functions |+| 12 | PA8 | bidirectional | GPIO supporting UART0_TX, SPI0_CS0, UART1_RTS, TIMG2_C0 functions |+| 13 | PA9 | bidirectional | GPIO supporting UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1 functions |+| 14 | PA10 | bidirectional | High-speed GPIO supporting UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0 functions |+| 15 | PA11 | bidirectional | GPIO supporting UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1 functions |+| 16 | PA12 | bidirectional | GPIO supporting UART0_CTS, TIMG0_C0, FCC_IN functions |+| 17 | PA13 | bidirectional | GPIO supporting UART0_RTS, TIMG0_C1, UART1_RX functions |+| 18 | PA14 | bidirectional | GPIO supporting UART1_CTS, CLK_OUT, UART1_TX, TIMG1_C0 functions |+| 19 | PA15 | bidirectional | GPIO or ADC0 analog input channel 9, supports UART1_RTS, SPI0_CS2, TIMG4_C1 functions |+| 20 | PA16 | bidirectional | GPIO or ADC0 analog input channel 8, supports SPI0_POCI, TIMG0_C0, FCC_IN functions |+| 21 | PA17 | bidirectional | GPIO supporting UART0_TX, SPI0_SCK, TIMG4_C0, SPI0_CS1 functions; wake from SHUTDOWN |+| 22 | PA18 | bidirectional | GPIO or ADC0 analog input 7 or GPAMP inverting input, supports UART0_RX, SPI0_PICO, TIMG4_C1; BSL invoke pin; wake from SHUTDOWN |+| 23 | PA19 | bidirectional | High-speed GPIO or SWDIO serial wire debug data interface (bidirectional), supports SPI0_POCI function |+| 24 | PA20 | bidirectional | GPIO or ADC0 analog input 6 or SWCLK serial wire debug clock input, supports TIMG4_C0 function |+| 25 | PA21 | bidirectional | GPIO or ADC0 analog input 5 or external VREF- reference ground, supports TIMG2_C0, UART0_CTS, UART0_TX functions |+| 26 | PA22 | bidirectional | GPIO or ADC0 analog input 4 or GPAMP output, default BSL UART receive, supports UART0_RX, TIMG2_C1, UART0_RTS, CLK_OUT, UART1_RX functions |+| 27 | PA23 | bidirectional | GPIO or external VREF+ reference power supply, default BSL UART transmit, supports UART0_TX, SPI0_CS3, TIMG0_C0, UART0_CTS, UART1_TX functions |+| 28 | PA24 | bidirectional | GPIO or ADC0 analog input channel 3, supports SPI0_CS2, TIMG0_C1, UART0_RTS functions |+| 29 | PA25 | bidirectional | GPIO or ADC0 analog input channel 2, supports TIMG4_C1, UART0_TX, SPI0_PICO functions |+| 30 | PA26 | bidirectional | GPIO or ADC0 analog input channel 1 or GPAMP non-inverting input, supports TIMG1_C0, UART0_RX, SPI0_POCI functions |+| 31 | PA27 | bidirectional | GPIO or ADC0 analog input channel 0, supports TIMG1_C1, SPI0_CS3 functions |+| 32 | VCORE | power_out | Regulated core power supply output, 1.35V nominal; requires 470nF decoupling capacitor to ground |+| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32(5x5) |+| Category | Embedded Processors & Controllers |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `MSPM0L1105TRHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)+- 3D model files: `mspm0l1105trhbr-etched.step` / `mspm0l1105trhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0l1105trhbr.step` / `mspm0l1105trhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907234295758848) (74 pp, sha256 `99a46f09107d8a08`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mspm0l1105trhbr-datasheet.pdf)
page.jsonadded+310@@ -0,0 +1,310 @@+{+ "slug": "mspm0l1105trhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "mspm0l1105trhbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mspm0l1105trhbr.kicad_sym",+ "mspm0l1105trhbr.kicad_mod",+ "mspm0l1105trhbr.glb",+ "mspm0l1105trhbr.step",+ "mspm0l1105trhbr.lbr",+ "docs/hero.png",+ "docs/mspm0l1105trhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mspm0l1105trhbr-hero.glb",+ "mspm0l1105trhbr-hero.overlay.json"+ ],+ "component": {+ "mpn": "MSPM0L1105TRHBR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32(5x5)",+ "pin_count": 33,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907234295758848",+ "parts": {+ "symbol": "mspm0l1105trhbr.kicad_sym",+ "footprint": "mspm0l1105trhbr.kicad_mod",+ "model_3d": "mspm0l1105trhbr-hero.glb",+ "model_3d_plain": "mspm0l1105trhbr.glb",+ "model_3d_step": "mspm0l1105trhbr-etched.step",+ "model_3d_step_plain": "mspm0l1105trhbr.step",+ "lbr": "mspm0l1105trhbr.lbr"+ },+ "distributor_links": {+ "lcsc": 19189329,+ "digikey": "296-MSPM0L1105TRHBRTR-ND",+ "mouser": "595-MSPM0L1105TRHBR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T04:32:24Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-MSPM0L1105TRHBRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-MSPM0L1105TRHBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PA0",+ "type": "bidirectional",+ "description": "GPIO, 5-V tolerant open-drain, supports UART1_TX, I2C0_SDA, TIMG1_C0, SPI0_CS1; wake from SHUTDOWN"+ },+ {+ "number": "2",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO, 5-V tolerant open-drain, supports UART1_RX, I2C0_SCL, TIMG1_C1; wake from SHUTDOWN"+ },+ {+ "number": "3",+ "name": "NRST",+ "type": "input",+ "description": "Reset input, active-low, must be pulled to VDD for device operation"+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, 1.62V to 3.6V; requires 10µF bulk and 0.1µF bypass capacitors"+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference, system ground connection point"+ },+ {+ "number": "6",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO or ROSC external resistor (100kΩ, 0.1% tolerance) for oscillator trimming, supports TIMG1_C1, SPI0_CS0"+ },+ {+ "number": "7",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO supporting TIMG2_C0, SPI0_CS1, UART1_CTS functions"+ },+ {+ "number": "8",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO supporting TIMG2_C1, SPI0_POCI, UART1_RTS functions"+ },+ {+ "number": "9",+ "name": "PA5",+ "type": "bidirectional",+ "description": "High-speed GPIO supporting TIMG0_C0, SPI0_PICO, FCC_IN functions"+ },+ {+ "number": "10",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO supporting TIMG0_C1, SPI0_SCK functions"+ },+ {+ "number": "11",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO supporting CLK_OUT, TIMG1_C0 functions"+ },+ {+ "number": "12",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO supporting UART0_TX, SPI0_CS0, UART1_RTS, TIMG2_C0 functions"+ },+ {+ "number": "13",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO supporting UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1 functions"+ },+ {+ "number": "14",+ "name": "PA10",+ "type": "bidirectional",+ "description": "High-speed GPIO supporting UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0 functions"+ },+ {+ "number": "15",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO supporting UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1 functions"+ },+ {+ "number": "16",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO supporting UART0_CTS, TIMG0_C0, FCC_IN functions"+ },+ {+ "number": "17",+ "name": "PA13",+ "type": "bidirectional",+ "description": "GPIO supporting UART0_RTS, TIMG0_C1, UART1_RX functions"+ },+ {+ "number": "18",+ "name": "PA14",+ "type": "bidirectional",+ "description": "GPIO supporting UART1_CTS, CLK_OUT, UART1_TX, TIMG1_C0 functions"+ },+ {+ "number": "19",+ "name": "PA15",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input channel 9, supports UART1_RTS, SPI0_CS2, TIMG4_C1 functions"+ },+ {+ "number": "20",+ "name": "PA16",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input channel 8, supports SPI0_POCI, TIMG0_C0, FCC_IN functions"+ },+ {+ "number": "21",+ "name": "PA17",+ "type": "bidirectional",+ "description": "GPIO supporting UART0_TX, SPI0_SCK, TIMG4_C0, SPI0_CS1 functions; wake from SHUTDOWN"+ },+ {+ "number": "22",+ "name": "PA18",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input 7 or GPAMP inverting input, supports UART0_RX, SPI0_PICO, TIMG4_C1; BSL invoke pin; wake from SHUTDOWN"+ },+ {+ "number": "23",+ "name": "PA19",+ "type": "bidirectional",+ "description": "High-speed GPIO or SWDIO serial wire debug data interface (bidirectional), supports SPI0_POCI function"+ },+ {+ "number": "24",+ "name": "PA20",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input 6 or SWCLK serial wire debug clock input, supports TIMG4_C0 function"+ },+ {+ "number": "25",+ "name": "PA21",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input 5 or external VREF- reference ground, supports TIMG2_C0, UART0_CTS, UART0_TX functions"+ },+ {+ "number": "26",+ "name": "PA22",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input 4 or GPAMP output, default BSL UART receive, supports UART0_RX, TIMG2_C1, UART0_RTS, CLK_OUT, UART1_RX functions"+ },+ {+ "number": "27",+ "name": "PA23",+ "type": "bidirectional",+ "description": "GPIO or external VREF+ reference power supply, default BSL UART transmit, supports UART0_TX, SPI0_CS3, TIMG0_C0, UART0_CTS, UART1_TX functions"+ },+ {+ "number": "28",+ "name": "PA24",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input channel 3, supports SPI0_CS2, TIMG0_C1, UART0_RTS functions"+ },+ {+ "number": "29",+ "name": "PA25",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input channel 2, supports TIMG4_C1, UART0_TX, SPI0_PICO functions"+ },+ {+ "number": "30",+ "name": "PA26",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input channel 1 or GPAMP non-inverting input, supports TIMG1_C0, UART0_RX, SPI0_POCI functions"+ },+ {+ "number": "31",+ "name": "PA27",+ "type": "bidirectional",+ "description": "GPIO or ADC0 analog input channel 0, supports TIMG1_C1, SPI0_CS3 functions"+ },+ {+ "number": "32",+ "name": "VCORE",+ "type": "power_out",+ "description": "Regulated core power supply output, 1.35V nominal; requires 470nF decoupling capacitor to ground"+ },+ {+ "number": "33",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: VQFN-32 package includes exposed thermal pad (unlabeled/unnumbered) that datasheet recommends connec; PA21 (pin 25) and PA23 (pin 27) are dual-function pins serving as GPIO, ADC inputs, and analog refer",+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 26,+ "cost_usd": 0.2945,+ "at": "2026-10-03T04:31:53"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907234295758848",+ "pages": 74,+ "sha256": "99a46f09107d8a08",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}