component
MSPM0G3519SPZR
Public Made by Adomby adom
Texas Instruments , LQFP-100(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
MSPM0G3519SPZR
Texas Instruments · IC · LQFP-100(14x14)
MSPM0G3519SPZR from Texas Instruments, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | 5V-tolerant open-drain GPIO (ODIO), sinks up to 20 mA and needs an external pull-up to drive high; IOMUX options include UART0_TX, I2C0_SDA and TIMA0_C0. |
| 2 | PA1 | bidirectional | 5V-tolerant open-drain GPIO (ODIO), sinks up to 20 mA and needs an external pull-up to drive high; IOMUX options include UART0_RX, I2C0_SCL and TIMA0_C1. |
| 3 | PA28 | bidirectional | High-drive GPIO (HDIO), sources or sinks up to 20 mA; IOMUX options include UART0_TX, I2C0_SDA and TIMA0_C3. |
| 4 | PA29 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA sink or source at VDD ≥ 2.7 V; IOMUX options include I2C1_SCL, UART7_RTS and TIMG8_C0. |
| 5 | PA30 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA sink or source at VDD ≥ 2.7 V; IOMUX options include I2C1_SDA, UART7_CTS and TIMG8_C1. |
| 6 | NRST | input | Active-low reset input that must be pulled high to VDD or the device will not start; also available as a WAKE input. |
| 7 | PA31 | bidirectional | Standard-drive GPIO with wake (SDIO), up to 6 mA at VDD ≥ 2.7 V, can wake the device from SHUTDOWN; IOMUX options include UART0_RX, I2C0_SCL and TIMA0_C3N. |
| 8 | VDD | power_in | Supply voltage 1.62 V to 3.6 V; decouple with 10 µF and 0.1 µF low-ESR ceramic capacitors placed close to the pin. |
| 9 | VSS | power_in | Ground reference; current out of VSS is limited to 80 mA at Tj ≤ 130 °C (100 mA at Tj ≤ 90 °C). |
| 10 | PC12 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 11 | PC15 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 12 | PC13 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes SPI2_PICO. |
| 13 | PC14 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG9_C1 and SPI2_SCK. |
| 14 | PC28 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes UART5_RX. |
| 15 | PA2 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG8_C1, SPI0_CS0 and SPI1_CS0; also the ROSC pin, which takes a 100 kΩ ±0.1% resistor to VSS only when the SYSOSC FCL is used. |
| 16 | PA3 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG8_C0, SPI0_CS1 and I2C1_SDA; also the LFXIN crystal input (non-IOMUX). |
| 17 | PA4 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG8_C1, SPI0_POCI and I2C1_SCL; also the LFXOUT crystal output (non-IOMUX). |
| 18 | PA5 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG8_C0, SPI0_PICO and I2C1_SDA; also the HFXIN crystal input (non-IOMUX). |
| 19 | PA6 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG8_C1, SPI0_SCK and I2C1_SCL; also the HFXOUT crystal output (non-IOMUX). |
| 20 | PB0 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART0_TX, SPI1_CS2 and I2C0_SCL. |
| 21 | PB1 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART0_RX, SPI1_CS3 and I2C0_SDA. |
| 22 | PA7 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include COMP0_OUT, CLK_OUT and TIMG8_C0. |
| 23 | PB2 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_TX, UART7_CTS and I2C1_SCL. |
| 24 | PB3 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RX, UART7_RTS and I2C1_SDA. |
| 25 | PB4 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_TX, UART3_CTS and TIMA0_C1. |
| 26 | PB5 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RX, UART3_RTS and TIMA0_C1N. |
| 27 | PA8 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_TX, SPI0_CS0 and I2C0_SDA. |
| 28 | PA9 | bidirectional | High-speed GPIO (HSIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RX, SPI0_PICO and I2C0_SCL. |
| 29 | PB28 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include I2C2_SCL, SPI1_CS0 and TIMA_FAL0. |
| 30 | PB29 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include I2C2_SDA, SPI1_POCI and TIMA_FAL1. |
| 31 | PB30 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_CTS, SPI1_PICO and TIMA_FAL2. |
| 32 | PB31 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RTS, SPI1_SCK and TIMG8_IDX. |
| 33 | PA10 | bidirectional | High-drive GPIO (HDIO), sources or sinks up to 20 mA; IOMUX options include UART0_TX, SPI0_POCI and I2C0_SDA; also BSLTX and WAKE (non-IOMUX). |
| 34 | PA11 | bidirectional | High-drive GPIO (HDIO), sources or sinks up to 20 mA; IOMUX options include UART0_RX, SPI0_SCK and I2C0_SCL; also BSLRX and WAKE (non-IOMUX). |
| 35 | PC16 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 36 | PC17 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes TIMG14_C2 (input). |
| 37 | PC29 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes UART5_TX. |
| 38 | PC18 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 39 | PC19 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes TIMG9_C1. |
| 40 | PB6 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_TX, SPI1_CS0 and I2C2_SCL. |
| 41 | PB7 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RX, SPI1_POCI and I2C2_SDA. |
| 42 | PB8 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_CTS, SPI1_PICO and I2C2_SCL. |
| 43 | PB9 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RTS, SPI1_SCK and I2C2_SDA. |
| 44 | PB10 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG0_C0, TIMG8_C0 and UART4_TX. |
| 45 | PB11 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG0_C1, TIMG8_C1 and UART4_RX. |
| 46 | PB12 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_TX, TIMA0_C2 and UART4_CTS. |
| 47 | PB13 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RX, TIMA0_C3 and UART4_RTS. |
| 48 | PB14 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include SPI1_CS3, SPI1_POCI and TIMG12_C1. |
| 49 | PB15 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_TX, SPI1_PICO and UART3_CTS. |
| 50 | PB16 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_RX, SPI1_SCK and UART3_RTS. |
| 51 | PA12 | bidirectional | High-speed GPIO (HSIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_CTS, SPI0_SCK and COMP0_OUT; also analog input A0_8 (non-IOMUX). |
| 52 | PA13 | bidirectional | High-speed GPIO (HSIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RTS, SPI0_POCI and UART3_RX; also analog input A0_9 and COMP0_IN2- (non-IOMUX). |
| 53 | PA14 | bidirectional | High-speed GPIO (HSIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART0_CTS, SPI0_PICO and UART3_TX; also analog input A0_12 and COMP0_IN2+ (non-IOMUX). |
| 54 | PA15 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART0_RTS, SPI1_CS2 and I2C1_SCL; also analog input A1_0 and DAC_OUT (non-IOMUX). |
| 55 | PA16 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include COMP0_OUT, SPI1_POCI and I2C1_SDA; also analog input A1_1 (non-IOMUX). |
| 56 | PC0 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_TX, SPI1_CS3 and TIMG8_C0. |
| 57 | PC1 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RX, SPI1_CS2 and TIMG8_C1. |
| 58 | PC20 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 59 | PC21 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes CAN1_TX. |
| 60 | PC22 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes CAN1_RX. |
| 61 | PC23 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 62 | PC24 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; only the GPIO function is listed for this pin. |
| 63 | VSS | power_in | Ground reference; current out of VSS is limited to 80 mA at Tj ≤ 130 °C (100 mA at Tj ≤ 90 °C). |
| 64 | VDD | power_in | Supply voltage 1.62 V to 3.6 V; decouple with 10 µF and 0.1 µF low-ESR ceramic capacitors placed close to the pin. |
| 65 | PC2 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include I2C2_SCL, SPI1_CS0 and TIMA_FAL0. |
| 66 | PC3 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include I2C2_SDA, SPI1_CS1 and TIMA_FAL1. |
| 67 | PC4 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_CTS, SPI1_CS2 and TIMA_FAL2. |
| 68 | PC5 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RTS, SPI1_CS3 and TIMG8_IDX. |
| 69 | PA17 | bidirectional | Standard-drive GPIO with wake (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_TX, SPI1_SCK and I2C1_SCL; also WAKE and analog inputs A1_2 and COMP0_IN1- (non-IOMUX). |
| 70 | PA18 | bidirectional | Standard-drive GPIO with wake (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_RX, SPI1_PICO and I2C1_SDA; also BSL_invoke, WAKE and analog input A1_3 (non-IOMUX). |
| 71 | PA19 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include SWDIO, SPI1_POCI and I2C1_SDA; also analog input A0_13 (non-IOMUX). |
| 72 | PA20 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include SWCLK, SPI1_SCK and I2C1_SCL; also analog input A0_14 (non-IOMUX). |
| 73 | PB17 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_TX, SPI0_PICO and I2C0_SCL; also analog input A1_4 and COMP1_IN2- (non-IOMUX). |
| 74 | PB18 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_RX, SPI0_SCK and I2C0_SDA; also analog input A1_5 and COMP1_IN2+ (non-IOMUX). |
| 75 | PB19 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include COMP0_OUT, SPI0_POCI and TIMG8_C1; also analog input A1_6 and COMP2_IN1+ (non-IOMUX). |
| 76 | PA21 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_TX, SPI0_CS3 and UART1_CTS; also analog input A1_7, COMP2_IN1- and VREF- (non-IOMUX). |
| 77 | PA22 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_RX, SPI0_CS2 and UART1_RTS; also analog input A0_7 (non-IOMUX). |
| 78 | PC6 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_TX, SPI0_CS1 and TIMG8_C0. |
| 79 | PC7 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RX, SPI0_CS0 and TIMG8_C1. |
| 80 | PC8 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_CTS, SPI1_CS2 and TIMA0_C1. |
| 81 | PC9 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RTS, SPI1_CS1 and TIMA0_C1N. |
| 82 | PB20 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include SPI0_CS2, SPI1_CS0 and TIMG12_C0; also analog input A0_6 (non-IOMUX). |
| 83 | PB21 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART4_TX, SPI1_POCI and I2C0_SCL; also analog input A1_8 and COMP2_IN0+ (non-IOMUX). |
| 84 | PB22 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART4_RX, SPI1_PICO and I2C0_SDA; also analog input A1_10 and COMP2_IN0- (non-IOMUX). |
| 85 | PB23 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART1_CTS, SPI1_SCK and TIMA_FAL0; also analog input A1_11 (non-IOMUX). |
| 86 | PB24 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include SPI0_CS3, SPI0_CS1 and TIMG12_C1; also analog input A0_5 and COMP1_IN1+ (non-IOMUX). |
| 87 | PC10 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG9_C0 and UART6_RX. |
| 88 | PC11 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG9_C1 and UART6_TX. |
| 89 | PC25 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include TIMG9_IDX and UART6_CTS. |
| 90 | PC26 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include CAN1_TX and UART6_RTS. |
| 91 | PC27 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX option includes CAN1_RX. |
| 92 | PA23 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_TX, SPI0_CS3 and I2C2_SCL; also analog input A1_12, COMP1_IN1- and VREF+ (non-IOMUX). |
| 93 | PA24 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART7_RX, SPI0_CS2 and I2C2_SDA; also analog input A0_3 (non-IOMUX). |
| 94 | PA25 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RX, SPI1_CS3 and TIMG12_C1; also analog input A0_2 (non-IOMUX). |
| 95 | PB25 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART0_CTS, SPI0_CS0 and TIMA_FAL0; also analog input A0_4 (non-IOMUX). |
| 96 | PB26 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART0_RTS, SPI0_CS1 and TIMA0_C0; also analog input A1_13 and COMP1_IN0+ (non-IOMUX). |
| 97 | PB27 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include COMP0_OUT, SPI1_CS1 and TIMA0_C0N; also analog input A1_14 and COMP1_IN0- (non-IOMUX). |
| 98 | PA26 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_TX, SPI1_CS0 and TIMG8_C0; also analog input A0_1 and COMP0_IN0+ (non-IOMUX). |
| 99 | PA27 | bidirectional | Standard-drive GPIO (SDIO), up to 6 mA at VDD ≥ 2.7 V; IOMUX options include UART3_RX, SPI1_CS1 and TIMG8_C1; also analog input A0_0 and COMP0_IN0- (non-IOMUX). |
| 100 | VCORE | power_out | Internal core-logic supply node; connect only a 470 nF low-ESR capacitor to VSS placed close to the device and do not supply voltage or external load to it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-100(14x14) |
| Category | |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 4.1 | V | At VDD pin | 54 | |
| Input voltage (5-V tolerant open-drain pins) | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 54 | |
| Input voltage (common tolerance pins) | VI | -0.3 | 4.1 | V | Applied to any common tolerance pins; printed as VDD + 0.3 (4.1 MAX) | 54 | |
| Current into VDD pin (source) | IVDD | 80 | mA | -40 °C ≤ Tj ≤ 130 °C | 54 | ||
| Current into VDD pin (source) | IVDD | 100 | mA | -40 °C ≤ Tj ≤ 90 °C | 54 | ||
| Current out of VSS pin (sink) | IVSS | 80 | mA | -40 °C ≤ Tj ≤ 130 °C | 54 | ||
| Current out of VSS pin (sink) | IVSS | 100 | mA | -40 °C ≤ Tj ≤ 90 °C | 54 | ||
| Current of SDIO pin | IIO | 6 | mA | Current sunk or sourced by SDIO pin, VDD>=2.7V | 54 | ||
| Current of HSIO pin | IIO | 6 | mA | Current sunk or sourced by HSIO pin, VDD>=2.7V | 54 | ||
| Current of HDIO pin | IIO | 20 | mA | Current sunk or sourced by HDIO pin | 54 | ||
| Current of ODIO pin | IIO | 20 | mA | Current sunk by ODIO pin | 54 | ||
| Supported diode current | ID | -2 | 2 | mA | Diode current at any device pin (excluding Open Drain IO) | 54 | |
| Ambient temperature | TA | -40 | 125 | °C | Ambient temperature | 54 | |
| Junction temperature | TJ | -40 | 130 | °C | Junction temperature | 54 | |
| Storage temperature | Tstg | -40 | 150 | °C | 54 | ||
| Supply voltage | VDD | 1.62 | 3.6 | V | 54 | ||
| Voltage on VCORE pin | VCORE | 1.35 | V | Single printed value; column not labelled | 54 | ||
| Capacitor connected between VDD and VSS | CVDD | 10 | uF | Capacitor connected between VDD and VSS | 54 | ||
| Capacitor connected between VCORE and VSS | CVCORE | 470 | nF | Capacitor connected between VCORE and VSS | 54 | ||
| Ambient temperature (recommended) | TA | -40 | 125 | °C | Operating free-air temperature range | 54 | |
| Max junction temperature | TJ | 130 | °C | Max junction temperature | 55 | ||
| MCLK, CPUCLK frequency | fMCLK | 80 | MHz | With 2 flash wait states | 55 | ||
| MCLK, CPUCLK frequency | fMCLK | 48 | MHz | With 1 flash wait state | 55 | ||
| MCLK, CPUCLK frequency | fMCLK | 24 | MHz | With 0 flash wait states | 55 | ||
| ULPCLK frequency (PD0 bus clock) | fULPCLK | 40 | MHz | 55 | |||
| SLEEP supply current (IDDSLEEP) | IDDSLEEP | 4471 | 6678 | uA | VDD=3.3V; MCLK=SYSPLL, SYSPLLREF=SYSOSC, CPU is halted, 80MHz; 125 °C column | 57 | |
| STOP mode current (IDDSTOP0) | IDDSTOP0 | 467 | 516 | uA | VDD=3.3V; SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0, 4MHz; 125 °C column | 57 | |
| STOP mode current (IDDSTOP1) | IDDSTOP1 | 255 | 298 | uA | VDD=3.3V; SYSOSC=4MHz, USE4MHZSTOP=1, DISABLESTOP=0, 4MHz; 125 °C column | 57 | |
| STOP mode current (IDDSTOP2) | IDDSTOP2 | 86 | 123 | uA | VDD=3.3V; SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz; 125 °C column | 57 | |
| STANDBY mode current (IDDSTBY0) | IDDSTBY0 | 29 | 105 | uA | VDD=3.3V; LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz; 125 °C column | 58 | |
| STANDBY mode current (IDDSTBY1) | IDDSTBY1 | 28 | 100 | uA | VDD=3.3V; LFCLK=LFOSC, STOPCLKSTBY=1, RTC enabled; 125 °C column | 58 | |
| Power-on reset voltage level (rising) | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 58 |
| Power-on reset voltage level (falling) | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 58 |
| POR hysteresis | VHYS,POR | 30 | 58 | 74 | mV | 58 | |
| Brown-out reset voltage level 0 (rising) | VBOR0+ | 1.56 | 1.59 | 1.62 | V | Rising; device operating in RUN, SLEEP, or STOP mode | 59 |
| Brown-out reset voltage level 0 (falling) | VBOR0- | 1.55 | 1.58 | 1.61 | V | Falling; device operating in RUN, SLEEP, or STOP mode | 59 |
| Brown-out reset voltage level 1 (rising) | VBOR1+ | 2.13 | 2.17 | 2.21 | V | Rising; device operating in RUN, SLEEP, or STOP mode | 59 |
| Brown-out reset voltage level 1 (falling) | VBOR1- | 2.1 | 2.14 | 2.18 | V | Falling; device operating in RUN, SLEEP, or STOP mode | 59 |
| High-level input voltage (ODIO) | VIH | 2 | 5.5 | V | ODIO, VDD≥2.7V | 64 | |
| High-level input voltage (ODIO) | VIH | 5.5 | V | ODIO, VDD≥1.62V; min printed as 0.7*VDD | 64 | ||
| Low-level input voltage (ODIO) | VIL | -0.3 | 0.8 | V | ODIO, VDD≥2.7V | 64 | |
| Pull up resistance | RPU | 40 | kΩ | All I/O except ODIO; VIN = VSS; single printed value | 64 | ||
| Pull down resistance | RPD | 40 | kΩ | VIN = VDD; single printed value | 64 | ||
| Input capacitance | CI | 5 | pF | VDD = 3.3V | 64 | ||
| High-Z leakage current (PZ, PN, PM package) SDIO | Ilkg | 70 | nA | 1.62V ≤ VDD ≤ 3.6V, -40 °C ≤ Ta ≤ 25 °C | 64 | ||
| High-Z leakage current (PZ, PN, PM package) SDIO | Ilkg | 400 | nA | 1.62V ≤ VDD ≤ 3.6V, -40 °C ≤ Ta ≤ 125 °C | 64 | ||
| Low level output voltage (SDIO) | VOL | 0.45 | V | VDD≥2.7V, /IIO/max=6mA; -40 °C ≤ Ta ≤ 125 °C | 65 | ||
| Low level output voltage (ODIO) | VOL | 0.45 | V | VDD≥2.7V, IOL,max=8mA; -40 °C ≤ Ta ≤ 125 °C | 65 | ||
| SYSOSC frequency accuracy (FCL enabled, ideal ROSC) | fSYSOSC | -0.8 | 1.3 | % | SETUSEFCL=1, -40 °C ≤ Ta ≤ 125 °C | 61 | |
| LFOSC accuracy | -5 | 5 | % | -40 °C ≤ Ta ≤ 125 °C | 62 | ||
| Integral linearity error (INL) | EI | -2 | 2 | LSB | External reference | 68 | |
| Differential linearity error (DNL) | ED | -1 | 1 | LSB | Guaranteed no missing codes; External reference | 68 | |
| Offset error | EO | -3.5 | 3.5 | mV | Internal or External reference | 68 | |
| Gain error | EG | -4 | 4 | LSB | External reference, VRSEL = 1h | 68 | |
| VREF output voltage (1.4 V configuration) | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 69 |
| VREF output voltage (2.5 V configuration) | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 69 |
| Junction-to-ambient thermal resistance (LQFP-100 PZ) | RθJA | 72.1 | °C/W | LQFP-100 (PZ) | 55 | ||
| Junction-to-case (top) thermal resistance (LQFP-100 PZ) | RθJC(top) | 21.4 | °C/W | LQFP-100 (PZ) | 55 | ||
| Junction-to-board thermal resistance (LQFP-100 PZ) | RθJB | 54.8 | °C/W | LQFP-100 (PZ) | 55 | ||
| Junction-to-top characterization parameter (LQFP-100 PZ) | ΨJT | 1 | °C/W | LQFP-100 (PZ) | 55 |
CAD (KiCad official)
- Symbol:
MSPM0G3519SPZR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
mspm0g3519spzr-etched.step/mspm0g3519spzr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0g3519spzr.step/mspm0g3519spzr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (162 pp, sha256
a6ce501f275f0727, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).