main
Ray
Publish 0.1.0
dcdec8a
MSPM0G1507SRHBR
Texas Instruments · IC · VQFN-32(5x5)
MSPM0G1507SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | GPIO with 5V-tolerant open-drain IO and wake from SHUTDOWN; UART0_TX, I2C0_SDA, TIMA0_C0, FCC_IN, default BSL I2C data (BSLSDA), needs pull-up for output high. |
| 2 | PA1 | bidirectional | GPIO with 5V-tolerant open-drain IO and wake from SHUTDOWN; UART0_RX, I2C0_SCL, TIMA0_C1, default BSL I2C clock (BSLSCL), needs pull-up for output high. |
| 3 | NRST | input | Active-low reset input; must be pulled high to VDD for the device to release from reset and boot. |
| 4 | VDD | power_in | Power supply, 1.62V to 3.6V, with 10uF capacitor to VSS recommended. |
| 5 | VSS | power_in | Ground supply. |
| 6 | PA2 | bidirectional | Standard-drive GPIO; ROSC external resistor (100kΩ to VSS) pin for SYSOSC frequency correction loop, usable as GPIO when FCL is not used. |
| 7 | PA3 | bidirectional | Standard-drive GPIO; LFXIN low-frequency crystal oscillator input, also SPI0_CS1, UART2_CTS, COMP1_OUT, I2C1_SDA. |
| 8 | PA4 | bidirectional | Standard-drive GPIO; LFXOUT low-frequency crystal output or LFCLK_IN digital clock input, also SPI0_POCI, UART2_RTS, I2C1_SCL. |
| 9 | PA5 | bidirectional | Standard-drive GPIO; HFXIN high-frequency crystal oscillator input, also SPI0_PICO, FCC_IN. |
| 10 | PA6 | bidirectional | Standard-drive GPIO; HFXOUT high-frequency crystal output or HFCLK_IN digital clock input, also SPI0_SCK. |
| 11 | PA7 | bidirectional | Standard-drive GPIO; COMP0_OUT, CLK_OUT, TIMG8_C0, TIMA0_C2. |
| 12 | PA8 | bidirectional | Standard-drive GPIO; UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0. |
| 13 | PA9 | bidirectional | High-speed GPIO; UART1_RX, SPI0_PICO, UART0_CTS, RTC_OUT, CLK_OUT. |
| 14 | PA10 | bidirectional | High-drive GPIO with wake from SHUTDOWN; UART0_TX, SPI0_POCI, I2C0_SDA, CLK_OUT, default BSL UART TX (BSLTX). |
| 15 | PA11 | bidirectional | High-drive GPIO with wake from SHUTDOWN; UART0_RX, SPI0_SCK, I2C0_SCL, COMP0_OUT, default BSL UART RX (BSLRX). |
| 16 | PA12 | bidirectional | High-speed GPIO; UART3_CTS, SPI0_SCK, TIMG0_C0, TIMA0_C3, FCC_IN. |
| 17 | PA13 | bidirectional | High-speed GPIO; COMP0_IN2- analog input, UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1. |
| 18 | PA14 | bidirectional | High-speed GPIO; COMP0_IN2+ and ADC0 channel A0_12 analog inputs, UART0_CTS, SPI0_PICO, UART3_TX, CLK_OUT. |
| 19 | PA15 | bidirectional | Standard-drive GPIO; ADC1 input A1_0, DAC_OUT, OPA0_IN2+, OPA1_IN2+, COMP0_IN3+, COMP1_IN3+, also UART0_RTS, I2C1_SCL. |
| 20 | PA16 | bidirectional | Standard-drive GPIO; ADC1 input A1_1 and OPA1_OUT, also COMP2_OUT, SPI1_POCI, I2C1_SDA, FCC_IN. |
| 21 | PA17 | bidirectional | Standard GPIO with wake from SHUTDOWN; A1_2, OPA1_IN1-, COMP0_IN1- analog, also UART1_TX, SPI1_SCK, I2C1_SCL. |
| 22 | PA18 | bidirectional | Standard GPIO with wake from SHUTDOWN; A1_3, OPA1_IN1+, COMP0_IN1+, GPAMP_IN- analog, UART1_RX, SPI1_PICO, default BSL_invoke input. |
| 23 | PA19 | bidirectional | High-speed IO; SWDIO serial wire debug data input/output. |
| 24 | PA20 | input | Standard IO; SWCLK serial wire debug clock input from debug probe. |
| 25 | PA21 | bidirectional | Standard-drive GPIO; A1_7, COMP2_IN1-, VREF- analog, UART2_TX, UART1_CTS; internal test connection so no injection current allowed. |
| 26 | PA22 | bidirectional | Standard-drive GPIO; A0_7, GPAMP_OUT, OPA0_OUT analog, UART2_RX, UART1_RTS, CLK_OUT. |
| 27 | PA23 | bidirectional | Standard-drive GPIO; COMP1_IN1- analog input and VREF+ reference supply/external reference input or internal reference output, UART2_TX, SPI0_CS3. |
| 28 | PA24 | bidirectional | Standard-drive GPIO; A0_3 and OPA0_IN1- analog, UART2_RX, SPI0_CS2. |
| 29 | PA25 | bidirectional | Standard-drive GPIO; A0_2 and OPA0_IN1+ analog, UART3_RX, SPI1_CS3. |
| 30 | PA26 | bidirectional | Standard-drive GPIO; A0_1, COMP0_IN0+, OPA0_IN0+, GPAMP_IN+ analog, UART3_TX, SPI1_CS0. |
| 31 | PA27 | bidirectional | Standard-drive GPIO; A0_0, COMP0_IN0-, OPA0_IN0- analog, RTC_OUT, SPI1_CS1. |
| 32 | VCORE | power_out | Regulated core supply output; connect only a 470nF (0.47uF) capacitor to VSS, do not supply voltage or load externally. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD) | VDD | 1.62 | 3.6 | V | 30 | ||
| Ambient temperature, S version | TA | -40 | 125 | °C | 30 | ||
| Max junction temperature, S version | TJ | 130 | °C | 30 | |||
| Capacitor between VDD and VSS | CVDD | 10 | uF | 30 | |||
| Capacitor between VCORE and VSS | CVCORE | 470 | nF | 30 | |||
| MCLK frequency with 2 flash wait states | fMCLK | 80 | MHz | MCLK, CPUCLK frequency with 2 flash wait states | 31 | ||
| ULPCLK frequency | fULPCLK | 40 | MHz | 31 | |||
| Supply voltage at VDD pin | VDD | -0.3 | 4.1 | V | At VDD pin | 30 | |
| Input voltage 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 30 | |
| Input voltage common pins | VI | -0.3 | 4.1 | V | Applied to any common tolerance pins; VDD + 0.3 (4.1 MAX) | 30 | |
| Current into VDD pin | IVDD | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 30 | ||
| Current into VDD pin | IVDD | 100 | mA | -40℃ ≤ Tj≤ 90℃ | 30 | ||
| HDIO pin current | IIO | 20 | mA | Current sunk or sourced by HDIO pin | 30 | ||
| Diode current at any pin | ID | -2 | 2 | mA | Diode current at any device pin | 30 | |
| Junction temperature | TJ | -40 | 130 | °C | 30 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 30 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, all pins | 30 | |
| ESD CDM | V(ESD) | -500 | 500 | V | Charged device model, all pins | 30 | |
| Junction-to-ambient thermal resistance VQFN-32 (RHB) | RθJA | 32.1 | °C/W | VQFN-32 (RHB) | 32 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 23.6 | °C/W | VQFN-32 (RHB) | 32 | ||
| Junction-to-board thermal resistance | RθJB | 13 | °C/W | VQFN-32 (RHB) | 32 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.3 | °C/W | VQFN-32 (RHB) | 32 | ||
| SHUTDOWN supply current | IDDSHDN | 40 | 80 | nA | VDD=3.3V, -40°C column | 34 | |
| STANDBY supply current IDDSTBY0 | IDDSTBY0 | 2 | 7 | uA | LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, -40°C | 34 | |
| Power-on reset voltage rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 34 |
| Power-on reset voltage falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 34 |
| BOR level 0 rising | VBOR0+ | 1.56 | 1.59 | 1.62 | V | Rising (1) | 35 |
| Flash program/erase supply voltage | VDDPGM/ERASE | 1.62 | 3.6 | V | 35 | ||
| SYSOSC accuracy FCL disabled 32MHz | fSYSOSC | -2.6 | 1.8 | % | SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ | 38 | |
| LFOSC accuracy | -5 | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 38 | ||
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 46 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 46 |
| ADC integral linearity error | EI | -2 | 2 | LSB | External reference (2) | 45 | |
| ADC offset error | EO | -5 | 5 | mV | Internal or External reference (2) (3) | 45 | |
| Comparator input offset voltage | Voffset | -20 | 20 | mV | 47 | ||
| Digital IO pull up resistance | RPU | 40 | kΩ | All I/O except ODIO | 40 |
CAD (KiCad official)
- Symbol:
MSPM0G1507SRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
mspm0g1507srhbr-etched.step/mspm0g1507srhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0g1507srhbr.step/mspm0g1507srhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (135 pp, sha256
0e4369b6aeb4218c, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSPM0G1507SRHBR
**Texas Instruments** · IC · VQFN-32(5x5)
MSPM0G1507SRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | GPIO with 5V-tolerant open-drain IO and wake from SHUTDOWN; UART0_TX, I2C0_SDA, TIMA0_C0, FCC_IN, default BSL I2C data (BSLSDA), needs pull-up for output high. |
| 2 | PA1 | bidirectional | GPIO with 5V-tolerant open-drain IO and wake from SHUTDOWN; UART0_RX, I2C0_SCL, TIMA0_C1, default BSL I2C clock (BSLSCL), needs pull-up for output high. |
| 3 | NRST | input | Active-low reset input; must be pulled high to VDD for the device to release from reset and boot. |
| 4 | VDD | power_in | Power supply, 1.62V to 3.6V, with 10uF capacitor to VSS recommended. |
| 5 | VSS | power_in | Ground supply. |
| 6 | PA2 | bidirectional | Standard-drive GPIO; ROSC external resistor (100kΩ to VSS) pin for SYSOSC frequency correction loop, usable as GPIO when FCL is not used. |
| 7 | PA3 | bidirectional | Standard-drive GPIO; LFXIN low-frequency crystal oscillator input, also SPI0_CS1, UART2_CTS, COMP1_OUT, I2C1_SDA. |
| 8 | PA4 | bidirectional | Standard-drive GPIO; LFXOUT low-frequency crystal output or LFCLK_IN digital clock input, also SPI0_POCI, UART2_RTS, I2C1_SCL. |
| 9 | PA5 | bidirectional | Standard-drive GPIO; HFXIN high-frequency crystal oscillator input, also SPI0_PICO, FCC_IN. |
| 10 | PA6 | bidirectional | Standard-drive GPIO; HFXOUT high-frequency crystal output or HFCLK_IN digital clock input, also SPI0_SCK. |
| 11 | PA7 | bidirectional | Standard-drive GPIO; COMP0_OUT, CLK_OUT, TIMG8_C0, TIMA0_C2. |
| 12 | PA8 | bidirectional | Standard-drive GPIO; UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0. |
| 13 | PA9 | bidirectional | High-speed GPIO; UART1_RX, SPI0_PICO, UART0_CTS, RTC_OUT, CLK_OUT. |
| 14 | PA10 | bidirectional | High-drive GPIO with wake from SHUTDOWN; UART0_TX, SPI0_POCI, I2C0_SDA, CLK_OUT, default BSL UART TX (BSLTX). |
| 15 | PA11 | bidirectional | High-drive GPIO with wake from SHUTDOWN; UART0_RX, SPI0_SCK, I2C0_SCL, COMP0_OUT, default BSL UART RX (BSLRX). |
| 16 | PA12 | bidirectional | High-speed GPIO; UART3_CTS, SPI0_SCK, TIMG0_C0, TIMA0_C3, FCC_IN. |
| 17 | PA13 | bidirectional | High-speed GPIO; COMP0_IN2- analog input, UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1. |
| 18 | PA14 | bidirectional | High-speed GPIO; COMP0_IN2+ and ADC0 channel A0_12 analog inputs, UART0_CTS, SPI0_PICO, UART3_TX, CLK_OUT. |
| 19 | PA15 | bidirectional | Standard-drive GPIO; ADC1 input A1_0, DAC_OUT, OPA0_IN2+, OPA1_IN2+, COMP0_IN3+, COMP1_IN3+, also UART0_RTS, I2C1_SCL. |
| 20 | PA16 | bidirectional | Standard-drive GPIO; ADC1 input A1_1 and OPA1_OUT, also COMP2_OUT, SPI1_POCI, I2C1_SDA, FCC_IN. |
| 21 | PA17 | bidirectional | Standard GPIO with wake from SHUTDOWN; A1_2, OPA1_IN1-, COMP0_IN1- analog, also UART1_TX, SPI1_SCK, I2C1_SCL. |
| 22 | PA18 | bidirectional | Standard GPIO with wake from SHUTDOWN; A1_3, OPA1_IN1+, COMP0_IN1+, GPAMP_IN- analog, UART1_RX, SPI1_PICO, default BSL_invoke input. |
| 23 | PA19 | bidirectional | High-speed IO; SWDIO serial wire debug data input/output. |
| 24 | PA20 | input | Standard IO; SWCLK serial wire debug clock input from debug probe. |
| 25 | PA21 | bidirectional | Standard-drive GPIO; A1_7, COMP2_IN1-, VREF- analog, UART2_TX, UART1_CTS; internal test connection so no injection current allowed. |
| 26 | PA22 | bidirectional | Standard-drive GPIO; A0_7, GPAMP_OUT, OPA0_OUT analog, UART2_RX, UART1_RTS, CLK_OUT. |
| 27 | PA23 | bidirectional | Standard-drive GPIO; COMP1_IN1- analog input and VREF+ reference supply/external reference input or internal reference output, UART2_TX, SPI0_CS3. |
| 28 | PA24 | bidirectional | Standard-drive GPIO; A0_3 and OPA0_IN1- analog, UART2_RX, SPI0_CS2. |
| 29 | PA25 | bidirectional | Standard-drive GPIO; A0_2 and OPA0_IN1+ analog, UART3_RX, SPI1_CS3. |
| 30 | PA26 | bidirectional | Standard-drive GPIO; A0_1, COMP0_IN0+, OPA0_IN0+, GPAMP_IN+ analog, UART3_TX, SPI1_CS0. |
| 31 | PA27 | bidirectional | Standard-drive GPIO; A0_0, COMP0_IN0-, OPA0_IN0- analog, RTC_OUT, SPI1_CS1. |
| 32 | VCORE | power_out | Regulated core supply output; connect only a 470nF (0.47uF) capacitor to VSS, do not supply voltage or load externally. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VDD) | VDD | 1.62 | | 3.6 | V | | 30 |
| Ambient temperature, S version | TA | -40 | | 125 | °C | | 30 |
| Max junction temperature, S version | TJ | | | 130 | °C | | 30 |
| Capacitor between VDD and VSS | CVDD | 10 | | | uF | | 30 |
| Capacitor between VCORE and VSS | CVCORE | 470 | | | nF | | 30 |
| MCLK frequency with 2 flash wait states | fMCLK | | | 80 | MHz | MCLK, CPUCLK frequency with 2 flash wait states | 31 |
| ULPCLK frequency | fULPCLK | | | 40 | MHz | | 31 |
| Supply voltage at VDD pin | VDD | -0.3 | | 4.1 | V | At VDD pin | 30 |
| Input voltage 5-V tolerant open-drain pins | VI | -0.3 | | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 30 |
| Input voltage common pins | VI | -0.3 | | 4.1 | V | Applied to any common tolerance pins; VDD + 0.3 (4.1 MAX) | 30 |
| Current into VDD pin | IVDD | | | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 30 |
| Current into VDD pin | IVDD | | | 100 | mA | -40℃ ≤ Tj≤ 90℃ | 30 |
| HDIO pin current | IIO | | | 20 | mA | Current sunk or sourced by HDIO pin | 30 |
| Diode current at any pin | ID | -2 | | 2 | mA | Diode current at any device pin | 30 |
| Junction temperature | TJ | -40 | | 130 | °C | | 30 |
| Storage temperature | Tstg | -40 | | 150 | °C | | 30 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | Human body model, all pins | 30 |
| ESD CDM | V(ESD) | -500 | | 500 | V | Charged device model, all pins | 30 |
| Junction-to-ambient thermal resistance VQFN-32 (RHB) | RθJA | | 32.1 | | °C/W | VQFN-32 (RHB) | 32 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 23.6 | | °C/W | VQFN-32 (RHB) | 32 |
| Junction-to-board thermal resistance | RθJB | | 13 | | °C/W | VQFN-32 (RHB) | 32 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 3.3 | | °C/W | VQFN-32 (RHB) | 32 |
| SHUTDOWN supply current | IDDSHDN | | 40 | 80 | nA | VDD=3.3V, -40°C column | 34 |
| STANDBY supply current IDDSTBY0 | IDDSTBY0 | | 2 | 7 | uA | LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz, -40°C | 34 |
| Power-on reset voltage rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 34 |
| Power-on reset voltage falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 34 |
| BOR level 0 rising | VBOR0+ | 1.56 | 1.59 | 1.62 | V | Rising (1) | 35 |
| Flash program/erase supply voltage | VDDPGM/ERASE | 1.62 | | 3.6 | V | | 35 |
| SYSOSC accuracy FCL disabled 32MHz | fSYSOSC | -2.6 | | 1.8 | % | SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ | 38 |
| LFOSC accuracy | | -5 | | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 38 |
| VREF output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 46 |
| VREF output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 46 |
| ADC integral linearity error | EI | -2 | | 2 | LSB | External reference (2) | 45 |
| ADC offset error | EO | -5 | | 5 | mV | Internal or External reference (2) (3) | 45 |
| Comparator input offset voltage | Voffset | -20 | | 20 | mV | | 47 |
| Digital IO pull up resistance | RPU | | 40 | | kΩ | All I/O except ODIO | 40 |
## CAD (KiCad official)
- Symbol: `MSPM0G1507SRHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `mspm0g1507srhbr-etched.step` / `mspm0g1507srhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0g1507srhbr.step` / `mspm0g1507srhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/mspm0g1507.pdf?ts=1701344976068&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FMSPM0G1507%253FkeyMatch%253DMSPM0G1507SRHBR%2526tisearch%253Dsearch-everything%2526usecase%253DOPN) (135 pp, sha256 `0e4369b6aeb4218c`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mspm0g1507srhbr-datasheet.pdf)