component
MSPM0G1506SRGZR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+86@@ -0,0 +1,86 @@+# MSPM0G1506SRGZR++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)++MSPM0G1506SRGZR from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PA0 | bidirectional | 5V-tolerant open-drain GPIO that can wake the device from SHUTDOWN, with UART0_TX, I2C0_SDA, TIMA0_C0, TIMA_FAL1, TIMG8_C1 and FCC_IN functions, and BSLSDA as the default I2C BSL data. |+| 2 | PA1 | bidirectional | 5V-tolerant open-drain GPIO that can wake the device from SHUTDOWN, with UART0_RX, I2C0_SCL, TIMA0_C1, TIMA_FAL2, TIMG8_IDX and TIMG8_C0 functions, and BSLSCL as the default I2C BSL clock. |+| 3 | PA28 | bidirectional | High-drive GPIO that can wake the device from SHUTDOWN, with UART0_TX, I2C0_SDA, TIMA0_C3, TIMA_FAL0, TIMG7_C0 and TIMA1_C0 functions. |+| 4 | NRST | input | Active-low reset input that must be pulled up to VDD or the device will not start. |+| 5 | PA31 | bidirectional | High-drive GPIO that can wake the device from SHUTDOWN, with UART0_RX, I2C0_SCL, TIMA0_C3N, TIMG12_C1, CLK_OUT, TIMG7_C1 and TIMA1_C1 functions. |+| 6 | VDD | power_in | Power supply, 1.62 V to 3.6 V, decoupled to VSS with a 10 uF capacitor (0.1 uF also recommended) placed close to the pin. |+| 7 | VSS | power_in | Ground supply. |+| 8 | PA2 | bidirectional | Standard-drive GPIO that doubles as ROSC, the external 100 kOhm resistor input to VSS for the SYSOSC frequency correction loop, with TIMG8_C1, SPI0_CS0, TIMG7_C1 and SPI1_CS0 functions. |+| 9 | PA3 | bidirectional | Standard-drive GPIO that doubles as LFXIN, the low-frequency crystal oscillator input, with TIMG8_C0, SPI0_CS1, UART2_CTS, TIMA0_C2, COMP1_OUT, TIMG7_C0, TIMA0_C1 and I2C1_SDA functions. |+| 10 | PA4 | bidirectional | Standard-drive GPIO that doubles as LFXOUT, the low-frequency crystal oscillator output, and LFCLK_IN, with TIMG8_C1, SPI0_POCI, UART2_RTS, TIMA0_C3, TIMG7_C1, TIMA0_C1N and I2C1_SCL functions. |+| 11 | PA5 | bidirectional | Standard-drive GPIO that doubles as HFXIN, the high-frequency crystal oscillator input, with TIMG8_C0, SPI0_PICO, TIMA_FAL1, TIMG0_C0, TIMG6_C0 and FCC_IN functions. |+| 12 | PA6 | bidirectional | Standard-drive GPIO that doubles as HFXOUT, the high-frequency crystal oscillator output, and HFCLK_IN, with TIMG8_C1, SPI0_SCK, TIMA_FAL0, TIMG0_C1, TIMG6_C1 and TIMA0_C2N functions. |+| 13 | PA7 | bidirectional | Standard-drive GPIO with COMP0_OUT, CLK_OUT, TIMG8_C0, TIMA0_C2, TIMG8_IDX, TIMG7_C1 and TIMA0_C1 functions. |+| 14 | PB2 | bidirectional | Standard-drive GPIO with UART3_TX, UART2_CTS, I2C1_SCL, TIMA0_C3, UART1_CTS, TIMG6_C0 and TIMA1_C0 functions. |+| 15 | PB3 | bidirectional | Standard-drive GPIO with UART3_RX, UART2_RTS, I2C1_SDA, TIMA0_C3N, UART1_RTS, TIMG6_C1 and TIMA1_C1 functions. |+| 16 | PA8 | bidirectional | Standard-drive GPIO with UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0 and TIMA1_C0N functions. |+| 17 | PA9 | bidirectional | High-speed GPIO with UART1_RX, SPI0_PICO, UART0_CTS, TIMA0_C1, RTC_OUT, TIMA0_C0N, TIMA1_C1N and CLK_OUT functions. |+| 18 | PA10 | bidirectional | High-drive GPIO that can wake the device from SHUTDOWN, with UART0_TX, SPI0_POCI, I2C0_SDA, TIMA1_C0, TIMG12_C0, TIMA0_C2, I2C1_SDA and CLK_OUT functions, and BSLTX as the default UART BSL transmit. |+| 19 | PA11 | bidirectional | High-drive GPIO that can wake the device from SHUTDOWN, with UART0_RX, SPI0_SCK, I2C0_SCL, TIMA1_C1, COMP0_OUT, TIMA0_C2N and I2C1_SCL functions, and BSLRX as the default UART BSL receive. |+| 20 | PB6 | bidirectional | Standard-drive GPIO with UART1_TX, SPI1_CS0, SPI0_CS1, TIMG8_C0, UART2_CTS, TIMG6_C0 and TIMA1_C0N functions. |+| 21 | PB7 | bidirectional | Standard-drive GPIO with UART1_RX, SPI1_POCI, SPI0_CS2, TIMG8_C1, UART2_RTS, TIMG6_C1 and TIMA1_C1N functions. |+| 22 | PB8 | bidirectional | Standard-drive GPIO with UART1_CTS, SPI1_PICO, TIMA0_C0 and COMP1_OUT functions. |+| 23 | PB9 | bidirectional | Standard-drive GPIO with UART1_RTS, SPI1_SCK, TIMA0_C1 and TIMA0_C0N functions. |+| 24 | PB14 | bidirectional | Standard-drive GPIO with SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1, TIMG8_IDX and TIMA0_C0 functions. |+| 25 | PB15 | bidirectional | Standard-drive GPIO with UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0 and TIMG7_C0 functions. |+| 26 | PB16 | bidirectional | Standard-drive GPIO with UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1 and TIMG7_C1 functions. |+| 27 | PA12 | bidirectional | High-speed GPIO with UART3_CTS, SPI0_SCK, TIMG0_C0, TIMA0_C3 and FCC_IN functions. |+| 28 | PA13 | bidirectional | High-speed GPIO with analog input COMP0_IN2- and UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1 and TIMA0_C3N functions. |+| 29 | PA14 | bidirectional | High-speed GPIO with analog inputs COMP0_IN2+ and ADC0 channel A0_12, plus UART0_CTS, SPI0_PICO, UART3_TX, TIMG12_C0 and CLK_OUT functions. |+| 30 | PA15 | bidirectional | Standard-drive GPIO with analog functions A1_0, DAC_OUT, OPA0_IN2+, OPA1_IN2+, COMP0_IN3+ and COMP1_IN3+; avoid external circuitry on this pin when DAC_OUT is used. |+| 31 | PA16 | bidirectional | Standard-drive GPIO with analog functions A1_1 and OPA1_OUT, plus COMP2_OUT, SPI1_POCI, I2C1_SDA, TIMA1_C1 and FCC_IN functions. |+| 32 | PA17 | bidirectional | Standard-drive GPIO with SHUTDOWN wake capability and analog functions A1_2, OPA1_IN1- and COMP0_IN1-, plus UART1_TX, SPI1_SCK and I2C1_SCL functions. |+| 33 | PA18 | bidirectional | Standard-drive GPIO with SHUTDOWN wake capability and analog functions A1_3, OPA1_IN1+, COMP0_IN1+ and GPAMP_IN-, plus UART1_RX, SPI1_PICO, I2C1_SDA and BSL_invoke functions. |+| 34 | PA19 | bidirectional | High-speed GPIO that carries SWDIO, the serial wire debug data input/output. |+| 35 | PA20 | bidirectional | Standard-drive GPIO that carries SWCLK, the serial wire debug clock input. |+| 36 | PB17 | bidirectional | Standard-drive GPIO with analog functions A1_4 and COMP1_IN2-, plus UART2_TX, SPI0_PICO, SPI1_CS1, TIMA1_C0 and TIMA0_C2 functions. |+| 37 | PB18 | bidirectional | Standard-drive GPIO with analog functions A1_5 and COMP1_IN2+, plus UART2_RX, SPI0_SCK, SPI1_CS2, TIMA1_C1 and TIMA0_C2N functions. |+| 38 | PB19 | bidirectional | Standard-drive GPIO with analog functions A1_6, COMP2_IN1+ and OPA1_IN0+, plus COMP2_OUT, SPI0_POCI, TIMG8_C1, UART0_CTS and TIMG7_C1 functions. |+| 39 | PA21 | bidirectional | Standard-drive GPIO with analog functions A1_7, COMP2_IN1- and VREF- (voltage reference ground, with a decoupling capacitor between VREF+ and VREF-), plus UART2_TX, TIMG8_C0, UART1_CTS, TIMA0_C0 and TIMG6_C0 functions. |+| 40 | PA22 | bidirectional | Standard-drive GPIO with analog functions A0_7, GPAMP_OUT and OPA0_OUT, plus UART2_RX, TIMG8_C1, UART1_RTS, TIMA0_C1, CLK_OUT, TIMA0_C0N and TIMG6_C1 functions. |+| 41 | PB20 | bidirectional | Standard-drive GPIO with analog functions A0_6 and OPA1_IN0-, plus SPI0_CS2, SPI1_CS0, TIMA0_C2, TIMG12_C0, TIMA_FAL1, TIMA0_C1 and TIMA1_C1N functions. |+| 42 | PB24 | bidirectional | Standard-drive GPIO with analog functions A0_5 and COMP1_IN1+, plus SPI0_CS3, SPI0_CS1, TIMA0_C3, TIMG12_C1, TIMA0_C1N and TIMA1_C0N functions. |+| 43 | PA23 | bidirectional | Standard-drive GPIO with analog functions COMP1_IN1- and VREF+ (voltage reference supply, external reference input or internal reference output, with a 1 uF decoupling capacitor recommended), plus UART2_TX, SPI0_CS3, TIMA0_C3, TIMG0_C0, UART3_CTS, TIMG7_C0 and TIMG8_C0 functions. |+| 44 | PA24 | bidirectional | Standard-drive GPIO with analog functions A0_3 and OPA0_IN1-, plus UART2_RX, SPI0_CS2, TIMA0_C3N, TIMG0_C1, UART3_RTS, TIMG7_C1 and TIMA1_C1 functions. |+| 45 | PA25 | bidirectional | Standard-drive GPIO with analog functions A0_2 and OPA0_IN1+, plus UART3_RX, SPI1_CS3, TIMG12_C1, TIMA0_C3 and TIMA0_C1N functions. |+| 46 | PA26 | bidirectional | Standard-drive GPIO with analog functions A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+, plus UART3_TX, SPI1_CS0, TIMG8_C0, TIMA_FAL0 and TIMG7_C0 functions. |+| 47 | PA27 | bidirectional | Standard-drive GPIO with analog functions A0_0, COMP0_IN0- and OPA0_IN0-, plus RTC_OUT, SPI1_CS1, TIMG8_C1, TIMA_FAL2 and TIMG7_C1 functions. |+| 48 | VCORE | power_out | Regulated core supply output that must connect only to a 470 nF capacitor to VSS, with no external voltage or load applied. |+| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-48-EP(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 49 |++## CAD (KiCad official)++- Symbol: `MSPM0G1506SRGZR`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)+- 3D model files: `mspm0g1506srgzr-etched.step` / `mspm0g1506srgzr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0g1506srgzr.step` / `mspm0g1506srgzr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590916608472653824) (101 pp, sha256 `5fe0f52106449460`, retrieved 2026-10-01, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mspm0g1506srgzr-datasheet.pdf)
page.jsonadded+405@@ -0,0 +1,405 @@+{+ "slug": "mspm0g1506srgzr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "mspm0g1506srgzr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mspm0g1506srgzr.kicad_sym",+ "mspm0g1506srgzr.kicad_mod",+ "mspm0g1506srgzr.glb",+ "mspm0g1506srgzr.step",+ "mspm0g1506srgzr.lbr",+ "docs/hero.png",+ "docs/mspm0g1506srgzr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "MSPM0G1506SRGZR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-48-EP(7x7)",+ "pin_count": 49,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590916608472653824",+ "parts": {+ "symbol": "mspm0g1506srgzr.kicad_sym",+ "footprint": "mspm0g1506srgzr.kicad_mod",+ "model_3d": "mspm0g1506srgzr-etched.glb",+ "model_3d_plain": "mspm0g1506srgzr.glb",+ "model_3d_step": "mspm0g1506srgzr-etched.step",+ "model_3d_step_plain": "mspm0g1506srgzr.step",+ "lbr": "mspm0g1506srgzr.lbr"+ },+ "distributor_links": {+ "lcsc": "C22362616",+ "digikey": "296-MSPM0G1506SRGZRTR-ND",+ "mouser": "595-MSPM0G1506SRGZR"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T06:00:11Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-MSPM0G1506SRGZRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-MSPM0G1506SRGZR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5V-tolerant open-drain GPIO that can wake the device from SHUTDOWN, with UART0_TX, I2C0_SDA, TIMA0_C0, TIMA_FAL1, TIMG8_C1 and FCC_IN functions, and BSLSDA as the default I2C BSL data."+ },+ {+ "number": "2",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5V-tolerant open-drain GPIO that can wake the device from SHUTDOWN, with UART0_RX, I2C0_SCL, TIMA0_C1, TIMA_FAL2, TIMG8_IDX and TIMG8_C0 functions, and BSLSCL as the default I2C BSL clock."+ },+ {+ "number": "3",+ "name": "PA28",+ "type": "bidirectional",+ "description": "High-drive GPIO that can wake the device from SHUTDOWN, with UART0_TX, I2C0_SDA, TIMA0_C3, TIMA_FAL0, TIMG7_C0 and TIMA1_C0 functions."+ },+ {+ "number": "4",+ "name": "NRST",+ "type": "input",+ "description": "Active-low reset input that must be pulled up to VDD or the device will not start."+ },+ {+ "number": "5",+ "name": "PA31",+ "type": "bidirectional",+ "description": "High-drive GPIO that can wake the device from SHUTDOWN, with UART0_RX, I2C0_SCL, TIMA0_C3N, TIMG12_C1, CLK_OUT, TIMG7_C1 and TIMA1_C1 functions."+ },+ {+ "number": "6",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply, 1.62 V to 3.6 V, decoupled to VSS with a 10 uF capacitor (0.1 uF also recommended) placed close to the pin."+ },+ {+ "number": "7",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply."+ },+ {+ "number": "8",+ "name": "PA2",+ "type": "bidirectional",+ "description": "Standard-drive GPIO that doubles as ROSC, the external 100 kOhm resistor input to VSS for the SYSOSC frequency correction loop, with TIMG8_C1, SPI0_CS0, TIMG7_C1 and SPI1_CS0 functions."+ },+ {+ "number": "9",+ "name": "PA3",+ "type": "bidirectional",+ "description": "Standard-drive GPIO that doubles as LFXIN, the low-frequency crystal oscillator input, with TIMG8_C0, SPI0_CS1, UART2_CTS, TIMA0_C2, COMP1_OUT, TIMG7_C0, TIMA0_C1 and I2C1_SDA functions."+ },+ {+ "number": "10",+ "name": "PA4",+ "type": "bidirectional",+ "description": "Standard-drive GPIO that doubles as LFXOUT, the low-frequency crystal oscillator output, and LFCLK_IN, with TIMG8_C1, SPI0_POCI, UART2_RTS, TIMA0_C3, TIMG7_C1, TIMA0_C1N and I2C1_SCL functions."+ },+ {+ "number": "11",+ "name": "PA5",+ "type": "bidirectional",+ "description": "Standard-drive GPIO that doubles as HFXIN, the high-frequency crystal oscillator input, with TIMG8_C0, SPI0_PICO, TIMA_FAL1, TIMG0_C0, TIMG6_C0 and FCC_IN functions."+ },+ {+ "number": "12",+ "name": "PA6",+ "type": "bidirectional",+ "description": "Standard-drive GPIO that doubles as HFXOUT, the high-frequency crystal oscillator output, and HFCLK_IN, with TIMG8_C1, SPI0_SCK, TIMA_FAL0, TIMG0_C1, TIMG6_C1 and TIMA0_C2N functions."+ },+ {+ "number": "13",+ "name": "PA7",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with COMP0_OUT, CLK_OUT, TIMG8_C0, TIMA0_C2, TIMG8_IDX, TIMG7_C1 and TIMA0_C1 functions."+ },+ {+ "number": "14",+ "name": "PB2",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART3_TX, UART2_CTS, I2C1_SCL, TIMA0_C3, UART1_CTS, TIMG6_C0 and TIMA1_C0 functions."+ },+ {+ "number": "15",+ "name": "PB3",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART3_RX, UART2_RTS, I2C1_SDA, TIMA0_C3N, UART1_RTS, TIMG6_C1 and TIMA1_C1 functions."+ },+ {+ "number": "16",+ "name": "PA8",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0 and TIMA1_C0N functions."+ },+ {+ "number": "17",+ "name": "PA9",+ "type": "bidirectional",+ "description": "High-speed GPIO with UART1_RX, SPI0_PICO, UART0_CTS, TIMA0_C1, RTC_OUT, TIMA0_C0N, TIMA1_C1N and CLK_OUT functions."+ },+ {+ "number": "18",+ "name": "PA10",+ "type": "bidirectional",+ "description": "High-drive GPIO that can wake the device from SHUTDOWN, with UART0_TX, SPI0_POCI, I2C0_SDA, TIMA1_C0, TIMG12_C0, TIMA0_C2, I2C1_SDA and CLK_OUT functions, and BSLTX as the default UART BSL transmit."+ },+ {+ "number": "19",+ "name": "PA11",+ "type": "bidirectional",+ "description": "High-drive GPIO that can wake the device from SHUTDOWN, with UART0_RX, SPI0_SCK, I2C0_SCL, TIMA1_C1, COMP0_OUT, TIMA0_C2N and I2C1_SCL functions, and BSLRX as the default UART BSL receive."+ },+ {+ "number": "20",+ "name": "PB6",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART1_TX, SPI1_CS0, SPI0_CS1, TIMG8_C0, UART2_CTS, TIMG6_C0 and TIMA1_C0N functions."+ },+ {+ "number": "21",+ "name": "PB7",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART1_RX, SPI1_POCI, SPI0_CS2, TIMG8_C1, UART2_RTS, TIMG6_C1 and TIMA1_C1N functions."+ },+ {+ "number": "22",+ "name": "PB8",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART1_CTS, SPI1_PICO, TIMA0_C0 and COMP1_OUT functions."+ },+ {+ "number": "23",+ "name": "PB9",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART1_RTS, SPI1_SCK, TIMA0_C1 and TIMA0_C0N functions."+ },+ {+ "number": "24",+ "name": "PB14",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1, TIMG8_IDX and TIMA0_C0 functions."+ },+ {+ "number": "25",+ "name": "PB15",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0 and TIMG7_C0 functions."+ },+ {+ "number": "26",+ "name": "PB16",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1 and TIMG7_C1 functions."+ },+ {+ "number": "27",+ "name": "PA12",+ "type": "bidirectional",+ "description": "High-speed GPIO with UART3_CTS, SPI0_SCK, TIMG0_C0, TIMA0_C3 and FCC_IN functions."+ },+ {+ "number": "28",+ "name": "PA13",+ "type": "bidirectional",+ "description": "High-speed GPIO with analog input COMP0_IN2- and UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1 and TIMA0_C3N functions."+ },+ {+ "number": "29",+ "name": "PA14",+ "type": "bidirectional",+ "description": "High-speed GPIO with analog inputs COMP0_IN2+ and ADC0 channel A0_12, plus UART0_CTS, SPI0_PICO, UART3_TX, TIMG12_C0 and CLK_OUT functions."+ },+ {+ "number": "30",+ "name": "PA15",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A1_0, DAC_OUT, OPA0_IN2+, OPA1_IN2+, COMP0_IN3+ and COMP1_IN3+; avoid external circuitry on this pin when DAC_OUT is used."+ },+ {+ "number": "31",+ "name": "PA16",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A1_1 and OPA1_OUT, plus COMP2_OUT, SPI1_POCI, I2C1_SDA, TIMA1_C1 and FCC_IN functions."+ },+ {+ "number": "32",+ "name": "PA17",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with SHUTDOWN wake capability and analog functions A1_2, OPA1_IN1- and COMP0_IN1-, plus UART1_TX, SPI1_SCK and I2C1_SCL functions."+ },+ {+ "number": "33",+ "name": "PA18",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with SHUTDOWN wake capability and analog functions A1_3, OPA1_IN1+, COMP0_IN1+ and GPAMP_IN-, plus UART1_RX, SPI1_PICO, I2C1_SDA and BSL_invoke functions."+ },+ {+ "number": "34",+ "name": "PA19",+ "type": "bidirectional",+ "description": "High-speed GPIO that carries SWDIO, the serial wire debug data input/output."+ },+ {+ "number": "35",+ "name": "PA20",+ "type": "bidirectional",+ "description": "Standard-drive GPIO that carries SWCLK, the serial wire debug clock input."+ },+ {+ "number": "36",+ "name": "PB17",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A1_4 and COMP1_IN2-, plus UART2_TX, SPI0_PICO, SPI1_CS1, TIMA1_C0 and TIMA0_C2 functions."+ },+ {+ "number": "37",+ "name": "PB18",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A1_5 and COMP1_IN2+, plus UART2_RX, SPI0_SCK, SPI1_CS2, TIMA1_C1 and TIMA0_C2N functions."+ },+ {+ "number": "38",+ "name": "PB19",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A1_6, COMP2_IN1+ and OPA1_IN0+, plus COMP2_OUT, SPI0_POCI, TIMG8_C1, UART0_CTS and TIMG7_C1 functions."+ },+ {+ "number": "39",+ "name": "PA21",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A1_7, COMP2_IN1- and VREF- (voltage reference ground, with a decoupling capacitor between VREF+ and VREF-), plus UART2_TX, TIMG8_C0, UART1_CTS, TIMA0_C0 and TIMG6_C0 functions."+ },+ {+ "number": "40",+ "name": "PA22",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_7, GPAMP_OUT and OPA0_OUT, plus UART2_RX, TIMG8_C1, UART1_RTS, TIMA0_C1, CLK_OUT, TIMA0_C0N and TIMG6_C1 functions."+ },+ {+ "number": "41",+ "name": "PB20",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_6 and OPA1_IN0-, plus SPI0_CS2, SPI1_CS0, TIMA0_C2, TIMG12_C0, TIMA_FAL1, TIMA0_C1 and TIMA1_C1N functions."+ },+ {+ "number": "42",+ "name": "PB24",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_5 and COMP1_IN1+, plus SPI0_CS3, SPI0_CS1, TIMA0_C3, TIMG12_C1, TIMA0_C1N and TIMA1_C0N functions."+ },+ {+ "number": "43",+ "name": "PA23",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions COMP1_IN1- and VREF+ (voltage reference supply, external reference input or internal reference output, with a 1 uF decoupling capacitor recommended), plus UART2_TX, SPI0_CS3, TIMA0_C3, TIMG0_C0, UART3_CTS, TIMG7_C0 and TIMG8_C0 functions."+ },+ {+ "number": "44",+ "name": "PA24",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_3 and OPA0_IN1-, plus UART2_RX, SPI0_CS2, TIMA0_C3N, TIMG0_C1, UART3_RTS, TIMG7_C1 and TIMA1_C1 functions."+ },+ {+ "number": "45",+ "name": "PA25",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_2 and OPA0_IN1+, plus UART3_RX, SPI1_CS3, TIMG12_C1, TIMA0_C3 and TIMA0_C1N functions."+ },+ {+ "number": "46",+ "name": "PA26",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+, plus UART3_TX, SPI1_CS0, TIMG8_C0, TIMA_FAL0 and TIMG7_C0 functions."+ },+ {+ "number": "47",+ "name": "PA27",+ "type": "bidirectional",+ "description": "Standard-drive GPIO with analog functions A0_0, COMP0_IN0- and OPA0_IN0-, plus RTC_OUT, SPI1_CS1, TIMG8_C1, TIMA_FAL2 and TIMG7_C1 functions."+ },+ {+ "number": "48",+ "name": "VCORE",+ "type": "power_out",+ "description": "Regulated core supply output that must connect only to a 470 nF capacitor to VSS, with no external voltage or load applied."+ },+ {+ "number": "49",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin descriptions list multiple peripheral functions due to extensive IO multiplexing; some pins have; Datasheet table 6-1 lists '48 LQFP、VQFN' as a single column but pin diagrams show different assignme; VCORE internal supply pin type classified as power_in based on its function as a regulated supply no",+ "exposed pad 49 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 68,+ "cost_usd": 0.6396,+ "at": "2026-10-01T05:59:52"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590916608472653824",+ "pages": 101,+ "sha256": "5fe0f52106449460",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 49,+ "described": 49,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}