3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSPM0G1506SPTR
Texas Instruments · IC · LQFP-48(7x7)
MSPM0G1506SPTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | 5V-tolerant open-drain GPIO with wake from SHUTDOWN, muxed with UART0_TX, I2C0_SDA, TIMA0_C0, FCC_IN and default BSL I2C data (needs external pullup for output high). |
| 2 | PA1 | bidirectional | 5V-tolerant open-drain GPIO with wake from SHUTDOWN, muxed with UART0_RX, I2C0_SCL, TIMA0_C1 and default BSL I2C clock (needs external pullup for output high). |
| 3 | PA28 | bidirectional | High-drive GPIO with wake from SHUTDOWN, muxed with UART0_TX, I2C0_SDA, TIMA0_C3, TIMA_FAL0, TIMG7_C0 and TIMA1_C0. |
| 4 | NRST | input | Active-low reset input that must be pulled high to VDD for the device to start. |
| 5 | PA31 | bidirectional | High-drive GPIO with wake from SHUTDOWN, muxed with UART0_RX, I2C0_SCL, TIMA0_C3N, TIMG12_C1, CLK_OUT, TIMG7_C1 and TIMA1_C1. |
| 6 | VDD | power_in | Power supply, 1.62V to 3.6V, decoupled with 10uF (plus 0.1uF recommended) to VSS. |
| 7 | VSS | power_in | Ground supply. |
| 8 | PA2 | bidirectional | Standard GPIO or ROSC pin for the external resistor that improves SYSOSC accuracy, muxed with TIMG8_C1, SPI0_CS0, TIMG7_C1 and SPI1_CS0. |
| 9 | PA3 | bidirectional | Standard GPIO or LFXIN low-frequency crystal input, muxed with TIMG8_C0, SPI0_CS1, UART2_CTS, TIMA0_C2, COMP1_OUT, TIMG7_C0, TIMA0_C1 and I2C1_SDA. |
| 10 | PA4 | bidirectional | Standard GPIO or LFXOUT low-frequency crystal output, muxed with LFCLK_IN, SPI0_POCI, UART2_RTS, TIMA0_C3, TIMG7_C1, TIMA0_C1N and I2C1_SCL. |
| 11 | PA5 | bidirectional | Standard GPIO or HFXIN high-frequency crystal input, muxed with TIMG8_C0, SPI0_PICO, TIMA_FAL1, TIMG0_C0, TIMG6_C0 and FCC_IN. |
| 12 | PA6 | bidirectional | Standard GPIO or HFXOUT high-frequency crystal output, muxed with HFCLK_IN, TIMG8_C1, SPI0_SCK, TIMA_FAL0, TIMG0_C1, TIMG6_C1 and TIMA0_C2N. |
| 13 | PA7 | bidirectional | Standard GPIO muxed with COMP0_OUT, CLK_OUT, TIMG8_C0, TIMA0_C2, TIMG8_IDX, TIMG7_C1 and TIMA0_C1. |
| 14 | PB2 | bidirectional | Standard GPIO muxed with UART3_TX, UART2_CTS, I2C1_SCL, TIMA0_C3, UART1_CTS, TIMG6_C0 and TIMA1_C0. |
| 15 | PB3 | bidirectional | Standard GPIO muxed with UART3_RX, UART2_RTS, I2C1_SDA, TIMA0_C3N, UART1_RTS, TIMG6_C1 and TIMA1_C1. |
| 16 | PA8 | bidirectional | Standard GPIO muxed with UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0 and TIMA1_C0N. |
| 17 | PA9 | bidirectional | High-speed GPIO muxed with UART1_RX, SPI0_PICO, UART0_CTS, TIMA0_C1, RTC_OUT, CLK_OUT and timer complementary outputs. |
| 18 | PA10 | bidirectional | High-drive GPIO with wake from SHUTDOWN, muxed with UART0_TX, SPI0_POCI, I2C0_SDA, CLK_OUT and default BSL UART transmit (BSLTX). |
| 19 | PA11 | bidirectional | High-drive GPIO with wake from SHUTDOWN, muxed with UART0_RX, SPI0_SCK, I2C0_SCL, COMP0_OUT and default BSL UART receive (BSLRX). |
| 20 | PB6 | bidirectional | Standard GPIO muxed with UART1_TX, SPI1_CS0, SPI0_CS1, TIMG8_C0, UART2_CTS, TIMG6_C0 and TIMA1_C0N. |
| 21 | PB7 | bidirectional | Standard GPIO muxed with UART1_RX, SPI1_POCI, SPI0_CS2, TIMG8_C1, UART2_RTS, TIMG6_C1 and TIMA1_C1N. |
| 22 | PB8 | bidirectional | Standard GPIO muxed with UART1_CTS, SPI1_PICO, TIMA0_C0 and COMP1_OUT. |
| 23 | PB9 | bidirectional | Standard GPIO muxed with UART1_RTS, SPI1_SCK, TIMA0_C1 and TIMA0_C0N. |
| 24 | PB14 | bidirectional | Standard GPIO muxed with SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1, TIMG8_IDX and TIMA0_C0. |
| 25 | PB15 | bidirectional | Standard GPIO muxed with UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0 and TIMG7_C0. |
| 26 | PB16 | bidirectional | Standard GPIO muxed with UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1 and TIMG7_C1. |
| 27 | PA12 | bidirectional | High-speed GPIO muxed with UART3_CTS, SPI0_SCK, TIMG0_C0, TIMA0_C3 and FCC_IN. |
| 28 | PA13 | bidirectional | High-speed GPIO with COMP0_IN2- analog input, muxed with UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1 and TIMA0_C3N. |
| 29 | PA14 | bidirectional | High-speed GPIO with COMP0_IN2+ and ADC0 A0_12 analog inputs, muxed with UART0_CTS, SPI0_PICO, UART3_TX, TIMG12_C0 and CLK_OUT. |
| 30 | PA15 | bidirectional | Standard GPIO with ADC1 A1_0, DAC_OUT, OPA0_IN2+, OPA1_IN2+, COMP0_IN3+ and COMP1_IN3+ analog functions, muxed with UART0_RTS, SPI1_CS2 and I2C1_SCL. |
| 31 | PA16 | bidirectional | Standard GPIO with ADC1 A1_1 and OPA1_OUT analog functions, muxed with COMP2_OUT, SPI1_POCI, I2C1_SDA and FCC_IN. |
| 32 | PA17 | bidirectional | Standard GPIO with wake from SHUTDOWN and A1_2, OPA1_IN1-, COMP0_IN1- analog inputs, muxed with UART1_TX, SPI1_SCK and I2C1_SCL. |
| 33 | PA18 | bidirectional | Standard GPIO with wake from SHUTDOWN, A1_3, OPA1_IN1+, COMP0_IN1+ and GPAMP_IN- analog functions, muxed with UART1_RX, SPI1_PICO, I2C1_SDA, and default BSL_invoke input. |
| 34 | PA19 | bidirectional | High-speed pin carrying SWDIO, the bidirectional serial wire debug data line. |
| 35 | PA20 | bidirectional | Standard pin carrying SWCLK, the serial wire debug clock input from the debug probe. |
| 36 | PB17 | bidirectional | Standard GPIO with ADC1 A1_4 and COMP1_IN2- analog inputs, muxed with UART2_TX, SPI0_PICO, SPI1_CS1, TIMA1_C0 and TIMA0_C2. |
| 37 | PB18 | bidirectional | Standard GPIO with ADC1 A1_5 and COMP1_IN2+ analog inputs, muxed with UART2_RX, SPI0_SCK, SPI1_CS2, TIMA1_C1 and TIMA0_C2N. |
| 38 | PB19 | bidirectional | Standard GPIO with ADC1 A1_6, COMP2_IN1+ and OPA1_IN0+ analog inputs, muxed with COMP2_OUT, SPI0_POCI, TIMG8_C1, UART0_CTS and TIMG7_C1. |
| 39 | PA21 | bidirectional | Standard GPIO with ADC1 A1_7, COMP2_IN1- and VREF- functions, muxed with UART2_TX, TIMG8_C0, UART1_CTS, TIMA0_C0 and TIMG6_C0; no injection current is allowed on this pin. |
| 40 | PA22 | bidirectional | Standard GPIO with ADC0 A0_7, GPAMP_OUT and OPA0_OUT analog functions, muxed with UART2_RX, TIMG8_C1, UART1_RTS and CLK_OUT. |
| 41 | PB20 | bidirectional | Standard GPIO with ADC0 A0_6 and OPA1_IN0- analog inputs, muxed with SPI0_CS2, SPI1_CS0, TIMA0_C2 and TIMG12_C0. |
| 42 | PB24 | bidirectional | Standard GPIO with ADC0 A0_5 and COMP1_IN1+ analog inputs, muxed with SPI0_CS3, SPI0_CS1, TIMA0_C3 and TIMG12_C1. |
| 43 | PA23 | bidirectional | Standard GPIO with COMP1_IN1- and VREF+ (external reference input or internal reference output) functions, muxed with UART2_TX, SPI0_CS3 and TIMA0_C3. |
| 44 | PA24 | bidirectional | Standard GPIO with ADC0 A0_3 and OPA0_IN1- analog inputs, muxed with UART2_RX, SPI0_CS2, TIMA0_C3N and TIMG0_C1. |
| 45 | PA25 | bidirectional | Standard GPIO with ADC0 A0_2 and OPA0_IN1+ analog inputs, muxed with UART3_RX, SPI1_CS3, TIMG12_C1 and TIMA0_C3. |
| 46 | PA26 | bidirectional | Standard GPIO with ADC0 A0_1, COMP0_IN0+, OPA0_IN0+ and GPAMP_IN+ analog inputs, muxed with UART3_TX, SPI1_CS0 and TIMG8_C0. |
| 47 | PA27 | bidirectional | Standard GPIO with ADC0 A0_0, COMP0_IN0- and OPA0_IN0- analog inputs, muxed with RTC_OUT, SPI1_CS1 and TIMG8_C1. |
| 48 | VCORE | power_out | Regulated core supply output that connects only to a 0.47uF capacitor to VSS, with no external voltage or load applied. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 4.1 | V | At VDD pin | 30 | |
| Input voltage on 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 30 | |
| Input voltage on common tolerance pins | VI | -0.3 | V | Applied to any common tolerance pins; max printed as VDD + 0.3 (4.1 MAX) | 30 | ||
| Current into VDD pin (source) | IVDD | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 30 | ||
| Current into VDD pin (source) | IVDD | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 30 | ||
| Current out of VSS pin (sink) | IVSS | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 30 | ||
| Current out of VSS pin (sink) | IVSS | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 30 | ||
| Current of SDIO pin | IIO | 6 | mA | Current sunk or sourced by SDIO pin | 30 | ||
| Current of HSIO pin | IIO | 6 | mA | Current sunk or sourced by HSIO pin | 30 | ||
| Current of HDIO pin | IIO | 20 | mA | Current sunk or sourced by HDIO pin | 30 | ||
| Current of ODIO pin | IIO | 20 | mA | Current sunk by ODIO pin | 30 | ||
| Supported diode current | ID | -2 | 2 | mA | Diode current at any device pin | 30 | |
| Ambient temperature | TA | -40 | 125 | °C | Ambient Temperature | 30 | |
| Junction temperature | TJ | -40 | 130 | °C | Junction temperature | 30 | |
| Storage temperature | Tstg | -40 | 150 | °C | Storage temperature | 30 | |
| Supply voltage | VDD | 1.62 | 3.6 | V | 30 | ||
| Ambient temperature, S version | TA | -40 | 125 | °C | S version | 30 | |
| Max junction temperature, S version | TJ | 130 | °C | S version | 30 | ||
| MCLK, CPUCLK frequency | fMCLK | 80 | MHz | with 2 flash wait states | 31 | ||
| MCLK, CPUCLK frequency | fMCLK | 48 | MHz | with 1 flash wait state | 31 | ||
| MCLK, CPUCLK frequency | fMCLK | 24 | MHz | with 0 flash wait states | 31 | ||
| ULPCLK frequency | fULPCLK | 40 | MHz | ULPCLK frequency | 31 | ||
| Input high voltage ODIO | VIH | 2 | 5.5 | V | ODIO, VDD≥2.7V | 40 | |
| Input low voltage ODIO | VIL | -0.3 | 0.8 | V | ODIO, VDD≥2.7V | 40 | |
| High-Z leakage current (All packages except PM) | Ilkg | 50 | nA | SDIO; 1.62V ≤ VDD ≤ 3.6V, -40 ℃ ≤ Ta ≤ 125 ℃ | 40 | ||
| Low level output voltage SDIO | VOL | 0.4 | V | VDD≥2.7V, /IIO/,max=6mA; -40 °C ≤Ta≤25 °C | 42 | ||
| Low level output voltage SDIO | VOL | 0.45 | V | VDD≥2.7V, /IIO/,max=6mA; -40 °C ≤Ta≤125 °C | 42 | ||
| Low level output voltage ODIO | VOL | 0.4 | V | VDD≥2.7V, IOL,max=8mA; -40 °C ≤Ta≤25 °C | 42 | ||
| Low level output voltage ODIO | VOL | 0.45 | V | VDD≥2.7V, IOL,max=8mA; -40 °C ≤Ta≤125 °C | 42 | ||
| Integral linearity error (INL) | EI | -2 | 2 | LSB | External reference | 45 | |
| Differential linearity error (DNL) | ED | -1 | 1 | LSB | Guaranteed no missing codes; External reference | 45 | |
| Offset error | EO | -5 | 5 | mV | Internal or External reference | 45 | |
| Gain error | EG | -4 | 4 | LSB | External reference | 45 | |
| Factory trim temperature | TSTRIM | 27 | 30 | 33 | ℃ | ADC and VREF configuration: RES=0 (12-bit mode), VRSEL= 0h (VDD = 3.3V), ADC tsample = 12.5uS | 46 |
| Temperature coefficient | TSc | -2.1 | -1.8 | -1.7 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 46 |
| Voltage reference output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 46 |
| Voltage reference output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 46 |
| VREF operating supply current | IVREF | 189 | 330 | µA | BUFCONFIG = {0, 1}, No load | 46 | |
| Temperature coefficient of VREF (Bandgap+VRBUF) | TCVREF | 80 | ppm/°C | BUFCONFIG = {1} | 46 | ||
| Input offset voltage | Voffset | -20 | 20 | mV | Comparator | 47 | |
| Comparator current consumption | Icomp | 130 | 200 | µA | Vcm = VDD/2, 100mV overdrive, DAC output as a voltage reference, VDD is reference for DAC, High Speed Mode | 47 | |
| Integral nonlinearity (12-bit DAC) | INL | -4 | 4 | LSB | DAC linearity | 48 | |
| Differential nonlinearity (12-bit DAC) | DNL | -1 | 1 | LSB | Vref = internal or external or VDD reference | 48 | |
| Gain error | EG | -2 | -0.5 | 2 | %FSR | DAC linearity | 48 |
| Offset error | EO | -2 | 0.5 | 2 | mV | Vref = internal or external reference or vdd, With calibration | 48 |
| Input offset voltage (GPAMP) | VOS | -9 | 0.2 | 9 | mV | Noninverting, unity gain, TA = 25℃, VDD = 3.3V, CHOP = 0x0 | 49 |
| Input offset voltage (OPA) | VOS | -2 | 0.4 | 2 | mV | Noninverting, unity gain, VDD = 3.3V, TA = 25°C, CHOP = 0x0 | 50 |
| Output load current (OPA) | ILoad | -9 | 9 | mA | GBW = 0x0 | 51 | |
| SPI SCK duty cycle | DCSCK | 40 | 50 | 60 | % | 53 | |
| TRNG input clock frequency | TRNGCLKF | 9.5 | 10 | 25 | MHz | 56 | |
| SYSOSC frequency accuracy (FCL enabled, ROSC at ROSC pin) | fSYSOSC | -0.6 | 0.68 | % | SETUSEFCL=1, Ta = 25 ℃ | 37 | |
| SYSOSC frequency accuracy (FCL enabled, ROSC at ROSC pin) | fSYSOSC | -0.8 | 1.3 | % | SETUSEFCL=1, -40 ℃ ≤ Ta ≤ 125 ℃ | 37 | |
| LFOSC accuracy | fLFOSC | -5 | 5 | % | -40 ℃ ≤ Ta ≤ 125 ℃ | 37 | |
| Typical Thermal resistance junction-to-ambient LQFP-48 (PT) | RθJA | 69.2 | °C/W | LQFP-48 (PT) | 31 | ||
| Junction-to-case (top) thermal resistance LQFP-48 (PT) | RθJC(top) | 27.4 | °C/W | LQFP-48 (PT) | 31 | ||
| Junction-to-board thermal resistance LQFP-48 (PT) | RθJB | 32.6 | °C/W | LQFP-48 (PT) | 31 | ||
| Voltage on VCORE pin | VCORE | 1.35 | V | 30 | |||
| Capacitor connected between VDD and VSS | CVDD | 10 | uF | 30 | |||
| Capacitor connected between VCORE and VSS | CVCORE | 470 | nF | 30 |
CAD (KiCad official)
- Symbol:
MSPM0G1506SPTR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
mspm0g1506sptr-etched.step/mspm0g1506sptr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0g1506sptr.step/mspm0g1506sptr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (135 pp, sha256
0e4369b6aeb4218c, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).