Generated by kicad-footprint-generator · KiCad file format 20260206
MSPM0G1505SRGER
Texas Instruments · IC · VQFN-24(4x4)
MSPM0G1505SRGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA1 | bidirectional | 5V-tolerant open-drain GPIO with wake from SHUTDOWN; alternate functions include UART0_RX, I2C0_SCL (default BSL I2C_SCL) and TIMA0_C1, and an external pullup is required to drive it high. |
| 2 | NRST | input | Active-low reset input that must be pulled up to VDD for the device to release from reset and start; an optional 47 kΩ pullup with 10 nF pulldown capacitor is recommended. |
| 3 | VDD | power_in | Power supply input, 1.62 V to 3.6 V, decoupled with a 10 µF capacitor (plus 0.1 µF low-ESR ceramic recommended) placed close to the pin. |
| 4 | VSS | power_in | Ground supply; TI recommends connecting the QFN exposed thermal pad to VSS. |
| 5 | PA2 | bidirectional | General-purpose I/O that doubles as the ROSC pin, which requires an external 100 kΩ ±0.1% resistor to VSS when the SYSOSC frequency correction loop is used; otherwise it is a standard digital I/O. |
| 6 | PA3 | bidirectional | Standard-drive general-purpose I/O that can also serve as LFXIN, the input of the 32 kHz low-frequency crystal oscillator (LFXT). |
| 7 | PA4 | bidirectional | Standard-drive general-purpose I/O that can also serve as LFXOUT, the output of the 32 kHz crystal oscillator (LFXT), or as the LFCLK_IN digital low-frequency clock input. |
| 8 | PA9 | bidirectional | High-speed general-purpose I/O that can also serve as UART1_RX, SPI0_PICO, RTC_OUT or CLK_OUT. |
| 9 | PA10 | bidirectional | High-drive general-purpose I/O (20 mA drive) with wake from SHUTDOWN; can also serve as UART0_TX (default BSL UART_TX), I2C0_SDA or CLK_OUT. |
| 10 | PA11 | bidirectional | High-drive general-purpose I/O (20 mA drive) with wake from SHUTDOWN; can also serve as UART0_RX (default BSL UART_RX), I2C0_SCL or COMP0_OUT. |
| 11 | PA15 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC1 analog input A1_0 or DAC_OUT; when DAC_OUT is used, A1_0 cannot sample external signals and external circuitry on PA15 should be avoided. |
| 12 | PA16 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC1 analog input A1_1 or the OPA1_OUT output, or as the FCC_IN frequency clock counter input. |
| 13 | PA17 | bidirectional | Standard-drive general-purpose I/O with wake from SHUTDOWN that can also serve as ADC1 analog input A1_2, OPA1_IN1- or COMP0_IN1-. |
| 14 | PA18 | bidirectional | Standard-drive general-purpose I/O with wake from SHUTDOWN that can also serve as ADC1 analog input A1_3, OPA1_IN1+, COMP0_IN1+ or GPAMP_IN-, and is the default BSL_Invoke pin. |
| 15 | PA19 | bidirectional | High-speed general-purpose I/O that serves as SWDIO, the bidirectional serial wire debug data input/output. |
| 16 | PA20 | bidirectional | Standard-drive general-purpose I/O that serves as SWCLK, the serial wire debug input clock from the debug probe. |
| 17 | PA21 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC1 analog input A1_7 or VREF-; it has an internal test connection, so no diode injection current is allowed on this pin. |
| 18 | PA22 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC0 analog input A0_7, the GPAMP_OUT or OPA0_OUT output, or CLK_OUT. |
| 19 | PA23 | bidirectional | Standard-drive general-purpose I/O that can also serve as the VREF+ voltage reference input/output or COMP1_IN1-. |
| 20 | PA24 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC0 analog input A0_3 or OPA0_IN1-. |
| 21 | PA25 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC0 analog input A0_2 or OPA0_IN1+. |
| 22 | PA26 | bidirectional | Standard-drive general-purpose I/O that can also serve as ADC0 analog input A0_1, COMP0_IN0+, OPA0_IN0+ or GPAMP_IN+. |
| 23 | VCORE | power_out | Regulated core power supply output (nominal 1.35 V) that requires a 470 nF tank capacitor to VSS placed close to the pin; no voltage or external load may be applied to it. |
| 24 | PA0 | bidirectional | 5V-tolerant open-drain GPIO with wake from SHUTDOWN; can also serve as UART0_TX, I2C0_SDA (default BSL I2C_SDA), TIMA0_C0 or FCC_IN, and an external pullup is required to drive it high. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-24(4x4) |
| Category | |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | -0.3 | 4.1 | V | At VDD pin | 30 | |
| Input voltage, 5-V tolerant open-drain pins | VI | -0.3 | 5.5 | V | Applied to any 5-V tolerant open-drain pins | 30 | |
| Input voltage, common tolerance pins | VI | -0.3 | 4.1 | V | Applied to any common tolerance pins; max printed as VDD + 0.3 (4.1 MAX) | 30 | |
| Current into VDD pin (source) | IVDD | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 30 | ||
| Current into VDD pin (source) | IVDD | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 30 | ||
| Current out of VSS pin (sink) | IVSS | 80 | mA | -40℃ ≤ Tj ≤ 130℃ | 30 | ||
| Current out of VSS pin (sink) | IVSS | 100 | mA | -40℃ ≤ Tj ≤ 90℃ | 30 | ||
| Current of SDIO pin | IIO | 6 | mA | Current sunk or sourced by SDIO pin | 30 | ||
| Current of HSIO pin | IIO | 6 | mA | Current sunk or sourced by HSIO pin | 30 | ||
| Current of HDIO pin | IIO | 20 | mA | Current sunk or sourced by HDIO pin | 30 | ||
| Current of ODIO pin | IIO | 20 | mA | Current sunk by ODIO pin | 30 | ||
| Supported diode current | ID | -2 | 2 | mA | Diode current at any device pin | 30 | |
| Ambient Temperature | TA | -40 | 125 | °C | 30 | ||
| Junction temperature | TJ | -40 | 130 | °C | 30 | ||
| Storage temperature | Tstg | -40 | 150 | °C | 30 | ||
| Supply voltage | VDD | 1.62 | 3.6 | V | 30 | ||
| Ambient temperature, S version | TA | -40 | 125 | °C | 30 | ||
| Max junction temperature, S version | TJ | 130 | °C | 30 | |||
| MCLK, CPUCLK frequency | fMCLK | 80 | MHz | with 2 flash wait states | 31 | ||
| MCLK, CPUCLK frequency | fMCLK | 48 | MHz | with 1 flash wait state | 31 | ||
| MCLK, CPUCLK frequency | fMCLK | 24 | MHz | with 0 flash wait states | 31 | ||
| ULPCLK frequency (PD0 bus clock) | fULPCLK | 40 | MHz | 31 | |||
| Supply current in SLEEP mode | IDDSLEEP | 3800 | 5509 | uA | VDD=3.3V; 125°C; MCLK=SYSPLL, SYSPLLREF=SYSOSC, 80MHz, CPU is halted | 33 | |
| Supply current in SLEEP mode | IDDSLEEP | 1640 | 2834 | uA | VDD=3.3V; 125°C; MCLK=SYSOSC, 4MHz, CPU is halted | 33 | |
| Supply current in STOP mode | IDDSTOP0 | 381 | 577 | uA | VDD=3.3V; 125°C; SYSOSC=32MHz, USE4MHZSTOP=0, DISABLESTOP=0 | 33 | |
| Supply current in STOP mode | IDDSTOP2 | 71 | 170 | uA | VDD=3.3V; 125°C; SYSOSC off, DISABLESTOP=1, ULPCLK=LFCLK 32kHz | 33 | |
| Supply current in STANDBY mode | IDDSTBY0 | 20 | 105 | uA | VDD=3.3V; 125°C; LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 32kHz | 34 | |
| High level input voltage, ODIO | VIH | 2 | 5.5 | V | ODIO; VDD≥2.7V | 40 | |
| Low level input voltage, ODIO | VIL | -0.3 | 0.8 | V | ODIO; VDD≥2.7V | 40 | |
| Power-on reset voltage level, rising | VPOR+ | 0.95 | 1.3 | 1.59 | V | Rising | 34 |
| Power-on reset voltage level, falling | VPOR- | 0.9 | 1.25 | 1.54 | V | Falling | 34 |
| Brown-out reset voltage level 0, rising | VBOR0+ | 1.56 | 1.59 | 1.62 | V | Rising (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 0, falling | VBOR0- | 1.55 | 1.58 | 1.61 | V | Falling (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 1, rising | VBOR1+ | 2.13 | 2.17 | 2.21 | V | Rising (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 1, falling | VBOR1- | 2.1 | 2.14 | 2.18 | V | Falling (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 2, rising | VBOR2+ | 2.73 | 2.77 | 2.82 | V | Rising (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 2, falling | VBOR2- | 2.7 | 2.74 | 2.79 | V | Falling (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 3, rising | VBOR3+ | 2.88 | 2.96 | 3.04 | V | Rising (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Brown-out reset voltage level 3, falling | VBOR3- | 2.85 | 2.93 | 3.01 | V | Falling (device operating in RUN, SLEEP, or STOP mode) | 35 |
| Program and erase supply voltage | VDDPGM/ERASE | 1.62 | 3.6 | V | 35 | ||
| ADC clock frequency | fADCCLK | 4 | 48 | MHz | 44 | ||
| Analog input voltage range | Vin(ADC) | 0 | V | Applies to all ADC analog input pins; max printed as VDD | 43 | ||
| Integral linearity error (INL) | EI | -2 | 2 | LSB | External reference | 45 | |
| Differential linearity error (DNL) | ED | -1 | 1 | LSB | Guaranteed no missing codes; External reference | 45 | |
| Offset error | EO | -5 | 5 | mV | Internal or External reference | 45 | |
| Gain error (ADC) | EG | -4 | 4 | LSB | External reference | 45 | |
| Factory trim temperature | TSTRIM | 27 | 30 | 33 | ℃ | ADC and VREF configuration: RES=0 (12-bit mode), VRSEL= 0h (VDD = 3.3V), ADC tsample = 12.5uS | 46 |
| Temperature coefficient | TSc | -2.1 | -1.8 | -1.7 | mV/℃ | -40℃ ≤ Tj ≤ 130℃ | 46 |
| Voltage reference output voltage | VREF | 1.38 | 1.4 | 1.42 | V | BUFCONFIG = 1 | 46 |
| Voltage reference output voltage | VREF | 2.46 | 2.5 | 2.54 | V | BUFCONFIG = 0 | 46 |
| Recommended VREF decoupling capacitor on VREF+ pin | CVREF | 0.7 | 1 | 1.15 | µF | 46 | |
| Input offset voltage (comparator) | Voffset | -20 | 20 | mV | 47 | ||
| Gain error of DAC | EG | -2 | -0.5 | 2 | %FSR | 48 | |
| Differential nonlinearity (DAC) | DNL | -1 | 1 | LSB | Vref = internal or external or VDD reference | 48 | |
| Integral nonlinearity (DAC) | INL | -4 | 4 | LSB | 48 | ||
| Program and erase / core supply voltage | VCORE | 1.35 | V | 30 | |||
| Capacitor connected between VDD and VSS | CVDD | 10 | uF | 30 | |||
| Capacitor connected between VCORE and VSS | CVCORE | 470 | nF | 30 | |||
| Junction-to-ambient thermal resistance, VQFN-24 (RGE) | RθJA | 40.3 | °C/W | VQFN-24 (RGE) package | 31 | ||
| Junction-to-board thermal resistance, VQFN-24 (RGE) | RθJB | 17.9 | °C/W | VQFN-24 (RGE) package | 31 |
CAD (KiCad official)
- Symbol:
MSPM0G1505SRGER - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
mspm0g1505srger-etched.step/mspm0g1505srger-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0g1505srger.step/mspm0g1505srger.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (135 pp, sha256
0e4369b6aeb4218c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).