main
Ray
Publish 0.1.0
a4e0342
MSPM0G1105TPTR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
MSPM0G1105TPTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; 5V-tolerant open-drain I/O that is the default BSL I2C SDA pin and needs a pullup for output high. |
| 2 | PA1 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; 5V-tolerant open-drain I/O that is the default BSL I2C SCL pin and needs a pullup for output high. |
| 3 | PA28 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; High-Drive I/O with 20mA drive strength. |
| 4 | NRST | input | Active-low reset input that must be pulled high to VDD for the device to start. |
| 5 | PA31 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; High-Drive I/O that can also output CLK_OUT. |
| 6 | VDD | power_in | Power supply, 1.62V to 3.6V, decoupled with 10µF to VSS. |
| 7 | VSS | power_in | Ground supply. |
| 8 | PA2 | bidirectional | General-purpose digital I/O; also the ROSC pin, which needs a 100kΩ ±0.1% resistor to VSS when the SYSOSC FCL is used. |
| 9 | PA3 | bidirectional | General-purpose digital I/O; also the LFXIN input for the low-frequency crystal oscillator (LFXT). |
| 10 | PA4 | bidirectional | General-purpose digital I/O; also the LFXOUT output for the low-frequency crystal oscillator (LFXT) and the LFCLK_IN digital clock input. |
| 11 | PA5 | bidirectional | General-purpose digital I/O; also the HFXIN input for the high-frequency crystal oscillator (HFXT) and the FCC_IN input. |
| 12 | PA6 | bidirectional | General-purpose digital I/O; also the HFXOUT output for the high-frequency crystal oscillator (HFXT) and the HFCLK_IN digital clock input. |
| 13 | PA7 | bidirectional | General-purpose digital I/O; can also output CLK_OUT. |
| 14 | PB2 | bidirectional | General-purpose digital I/O with UART3_TX, UART2_CTS, I2C1_SCL and TIMA0_C3 functions. |
| 15 | PB3 | bidirectional | General-purpose digital I/O with UART3_RX, UART2_RTS, I2C1_SDA and TIMA0_C3N functions. |
| 16 | PA8 | bidirectional | General-purpose digital I/O with UART1_TX, SPI0_CS0 and TIMA0_C0 functions. |
| 17 | PA9 | bidirectional | High-speed I/O with UART1_RX, SPI0_PICO, RTC_OUT and CLK_OUT functions. |
| 18 | PA10 | bidirectional | High-drive I/O with UART0_TX, SPI0_POCI, I2C0_SDA and CLK_OUT functions; default BSL UART_TX. |
| 19 | PA11 | bidirectional | High-drive I/O with UART0_RX, SPI0_SCK, I2C0_SCL and COMP0_OUT functions; default BSL UART_RX. |
| 20 | PB6 | bidirectional | General-purpose digital I/O with UART1_TX, SPI1_CS0 and TIMG8_C0 functions. |
| 21 | PB7 | bidirectional | General-purpose digital I/O with UART1_RX, SPI1_POCI and TIMG8_C1 functions. |
| 22 | PB8 | bidirectional | General-purpose digital I/O with UART1_CTS, SPI1_PICO, TIMA0_C0 and COMP1_OUT functions. |
| 23 | PB9 | bidirectional | General-purpose digital I/O with UART1_RTS, SPI1_SCK, TIMA0_C1 and TIMA0_C0N functions. |
| 24 | PB14 | bidirectional | General-purpose digital I/O with SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1 and TIMA0_C0 functions. |
| 25 | PB15 | bidirectional | General-purpose digital I/O with UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0 and TIMG7_C0 functions. |
| 26 | PB16 | bidirectional | General-purpose digital I/O with UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1 and TIMG7_C1 functions. |
| 27 | PA12 | bidirectional | High-speed I/O with UART3_CTS, SPI0_SCK, TIMG0_C0 and FCC_IN functions. |
| 28 | PA13 | bidirectional | High-speed I/O with UART3_RTS, SPI0_POCI, UART3_RX and TIMG0_C1 functions. |
| 29 | PA14 | bidirectional | High-speed I/O with analog input A0_12 (ADC0), UART0_CTS, SPI0_PICO, UART3_TX and CLK_OUT functions. |
| 30 | PA15 | bidirectional | General-purpose digital I/O with analog input A1_0 (ADC1), UART0_RTS, SPI1_CS2, I2C1_SCL and TIMA1_C0 functions. |
| 31 | PA16 | bidirectional | General-purpose digital I/O with analog input A1_1 (ADC1), SPI1_POCI, I2C1_SDA, TIMA1_C1 and FCC_IN functions. |
| 32 | PA17 | bidirectional | Standard I/O with wake and analog input A1_2 (ADC1), UART1_TX, SPI1_SCK, I2C1_SCL and TIMA0_C3 functions. |
| 33 | PA18 | bidirectional | Standard I/O with wake, analog input A1_3 (ADC1) and GPAMP_IN- function; default BSL_Invoke pin. |
| 34 | PA19 | bidirectional | High-speed I/O with SWDIO serial wire debug data function. |
| 35 | PA20 | bidirectional | Standard I/O with SWCLK serial wire debug clock function. |
| 36 | PB17 | bidirectional | General-purpose digital I/O with analog input A1_4 (ADC1), UART2_TX, SPI0_PICO, SPI1_CS1, TIMA1_C0 and TIMA0_C2 functions. |
| 37 | PB18 | bidirectional | General-purpose digital I/O with analog input A1_5 (ADC1), UART2_RX, SPI0_SCK, SPI1_CS2, TIMA1_C1 and TIMA0_C2N functions. |
| 38 | PB19 | bidirectional | General-purpose digital I/O with analog input A1_6 (ADC1), SPI0_POCI, TIMG8_C1, UART0_CTS and TIMG7_C1 functions. |
| 39 | PA21 | bidirectional | General-purpose digital I/O with analog input A1_7 (ADC1) and VREF- function; has an internal test connection, so no injection current is allowed. |
| 40 | PA22 | bidirectional | General-purpose digital I/O with analog input A0_7 (ADC0), GPAMP_OUT function, UART2_RX, TIMG8_C1, UART1_RTS and CLK_OUT functions. |
| 41 | PB20 | bidirectional | General-purpose digital I/O with analog input A0_6 (ADC0), SPI0_CS2, SPI1_CS0, TIMA0_C2 and TIMG12_C0 functions. |
| 42 | PB24 | bidirectional | General-purpose digital I/O with analog input A0_5 (ADC0), SPI0_CS3, SPI0_CS1, TIMA0_C3 and TIMG12_C1 functions. |
| 43 | PA23 | bidirectional | General-purpose digital I/O with VREF+ voltage reference input or output, UART2_TX, SPI0_CS3, TIMA0_C3 and TIMG0_C0 functions. |
| 44 | PA24 | bidirectional | General-purpose digital I/O with analog input A0_3 (ADC0), UART2_RX, SPI0_CS2, TIMA0_C3N and TIMG0_C1 functions. |
| 45 | PA25 | bidirectional | General-purpose digital I/O with analog input A0_2 (ADC0), UART3_RX, SPI1_CS3, TIMG12_C1 and TIMA0_C3 functions. |
| 46 | PA26 | bidirectional | General-purpose digital I/O with analog input A0_1 (ADC0) and GPAMP_IN+ function, UART3_TX, SPI1_CS0 and TIMG8_C0 functions. |
| 47 | PA27 | bidirectional | General-purpose digital I/O with analog input A0_0 (ADC0), RTC_OUT, SPI1_CS1, TIMG8_C1 and TIMA_FAL2 functions. |
| 48 | VCORE | power_out | Regulated core power supply output that requires a 470nF to 0.47µF tank capacitor to VSS and must not have any external load or supply applied. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
MSPM0G1105TPTR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
mspm0g1105tptr-etched.step/mspm0g1105tptr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mspm0g1105tptr.step/mspm0g1105tptr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (121 pp, sha256
ec67551b3d3efdb2, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSPM0G1105TPTR
**Texas Instruments** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
MSPM0G1105TPTR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PA0 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; 5V-tolerant open-drain I/O that is the default BSL I2C SDA pin and needs a pullup for output high. |
| 2 | PA1 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; 5V-tolerant open-drain I/O that is the default BSL I2C SCL pin and needs a pullup for output high. |
| 3 | PA28 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; High-Drive I/O with 20mA drive strength. |
| 4 | NRST | input | Active-low reset input that must be pulled high to VDD for the device to start. |
| 5 | PA31 | bidirectional | General-purpose digital I/O with wake up from SHUTDOWN; High-Drive I/O that can also output CLK_OUT. |
| 6 | VDD | power_in | Power supply, 1.62V to 3.6V, decoupled with 10µF to VSS. |
| 7 | VSS | power_in | Ground supply. |
| 8 | PA2 | bidirectional | General-purpose digital I/O; also the ROSC pin, which needs a 100kΩ ±0.1% resistor to VSS when the SYSOSC FCL is used. |
| 9 | PA3 | bidirectional | General-purpose digital I/O; also the LFXIN input for the low-frequency crystal oscillator (LFXT). |
| 10 | PA4 | bidirectional | General-purpose digital I/O; also the LFXOUT output for the low-frequency crystal oscillator (LFXT) and the LFCLK_IN digital clock input. |
| 11 | PA5 | bidirectional | General-purpose digital I/O; also the HFXIN input for the high-frequency crystal oscillator (HFXT) and the FCC_IN input. |
| 12 | PA6 | bidirectional | General-purpose digital I/O; also the HFXOUT output for the high-frequency crystal oscillator (HFXT) and the HFCLK_IN digital clock input. |
| 13 | PA7 | bidirectional | General-purpose digital I/O; can also output CLK_OUT. |
| 14 | PB2 | bidirectional | General-purpose digital I/O with UART3_TX, UART2_CTS, I2C1_SCL and TIMA0_C3 functions. |
| 15 | PB3 | bidirectional | General-purpose digital I/O with UART3_RX, UART2_RTS, I2C1_SDA and TIMA0_C3N functions. |
| 16 | PA8 | bidirectional | General-purpose digital I/O with UART1_TX, SPI0_CS0 and TIMA0_C0 functions. |
| 17 | PA9 | bidirectional | High-speed I/O with UART1_RX, SPI0_PICO, RTC_OUT and CLK_OUT functions. |
| 18 | PA10 | bidirectional | High-drive I/O with UART0_TX, SPI0_POCI, I2C0_SDA and CLK_OUT functions; default BSL UART_TX. |
| 19 | PA11 | bidirectional | High-drive I/O with UART0_RX, SPI0_SCK, I2C0_SCL and COMP0_OUT functions; default BSL UART_RX. |
| 20 | PB6 | bidirectional | General-purpose digital I/O with UART1_TX, SPI1_CS0 and TIMG8_C0 functions. |
| 21 | PB7 | bidirectional | General-purpose digital I/O with UART1_RX, SPI1_POCI and TIMG8_C1 functions. |
| 22 | PB8 | bidirectional | General-purpose digital I/O with UART1_CTS, SPI1_PICO, TIMA0_C0 and COMP1_OUT functions. |
| 23 | PB9 | bidirectional | General-purpose digital I/O with UART1_RTS, SPI1_SCK, TIMA0_C1 and TIMA0_C0N functions. |
| 24 | PB14 | bidirectional | General-purpose digital I/O with SPI1_CS3, SPI1_POCI, SPI0_CS3, TIMG12_C1 and TIMA0_C0 functions. |
| 25 | PB15 | bidirectional | General-purpose digital I/O with UART2_TX, SPI1_PICO, UART3_CTS, TIMG8_C0 and TIMG7_C0 functions. |
| 26 | PB16 | bidirectional | General-purpose digital I/O with UART2_RX, SPI1_SCK, UART3_RTS, TIMG8_C1 and TIMG7_C1 functions. |
| 27 | PA12 | bidirectional | High-speed I/O with UART3_CTS, SPI0_SCK, TIMG0_C0 and FCC_IN functions. |
| 28 | PA13 | bidirectional | High-speed I/O with UART3_RTS, SPI0_POCI, UART3_RX and TIMG0_C1 functions. |
| 29 | PA14 | bidirectional | High-speed I/O with analog input A0_12 (ADC0), UART0_CTS, SPI0_PICO, UART3_TX and CLK_OUT functions. |
| 30 | PA15 | bidirectional | General-purpose digital I/O with analog input A1_0 (ADC1), UART0_RTS, SPI1_CS2, I2C1_SCL and TIMA1_C0 functions. |
| 31 | PA16 | bidirectional | General-purpose digital I/O with analog input A1_1 (ADC1), SPI1_POCI, I2C1_SDA, TIMA1_C1 and FCC_IN functions. |
| 32 | PA17 | bidirectional | Standard I/O with wake and analog input A1_2 (ADC1), UART1_TX, SPI1_SCK, I2C1_SCL and TIMA0_C3 functions. |
| 33 | PA18 | bidirectional | Standard I/O with wake, analog input A1_3 (ADC1) and GPAMP_IN- function; default BSL_Invoke pin. |
| 34 | PA19 | bidirectional | High-speed I/O with SWDIO serial wire debug data function. |
| 35 | PA20 | bidirectional | Standard I/O with SWCLK serial wire debug clock function. |
| 36 | PB17 | bidirectional | General-purpose digital I/O with analog input A1_4 (ADC1), UART2_TX, SPI0_PICO, SPI1_CS1, TIMA1_C0 and TIMA0_C2 functions. |
| 37 | PB18 | bidirectional | General-purpose digital I/O with analog input A1_5 (ADC1), UART2_RX, SPI0_SCK, SPI1_CS2, TIMA1_C1 and TIMA0_C2N functions. |
| 38 | PB19 | bidirectional | General-purpose digital I/O with analog input A1_6 (ADC1), SPI0_POCI, TIMG8_C1, UART0_CTS and TIMG7_C1 functions. |
| 39 | PA21 | bidirectional | General-purpose digital I/O with analog input A1_7 (ADC1) and VREF- function; has an internal test connection, so no injection current is allowed. |
| 40 | PA22 | bidirectional | General-purpose digital I/O with analog input A0_7 (ADC0), GPAMP_OUT function, UART2_RX, TIMG8_C1, UART1_RTS and CLK_OUT functions. |
| 41 | PB20 | bidirectional | General-purpose digital I/O with analog input A0_6 (ADC0), SPI0_CS2, SPI1_CS0, TIMA0_C2 and TIMG12_C0 functions. |
| 42 | PB24 | bidirectional | General-purpose digital I/O with analog input A0_5 (ADC0), SPI0_CS3, SPI0_CS1, TIMA0_C3 and TIMG12_C1 functions. |
| 43 | PA23 | bidirectional | General-purpose digital I/O with VREF+ voltage reference input or output, UART2_TX, SPI0_CS3, TIMA0_C3 and TIMG0_C0 functions. |
| 44 | PA24 | bidirectional | General-purpose digital I/O with analog input A0_3 (ADC0), UART2_RX, SPI0_CS2, TIMA0_C3N and TIMG0_C1 functions. |
| 45 | PA25 | bidirectional | General-purpose digital I/O with analog input A0_2 (ADC0), UART3_RX, SPI1_CS3, TIMG12_C1 and TIMA0_C3 functions. |
| 46 | PA26 | bidirectional | General-purpose digital I/O with analog input A0_1 (ADC0) and GPAMP_IN+ function, UART3_TX, SPI1_CS0 and TIMG8_C0 functions. |
| 47 | PA27 | bidirectional | General-purpose digital I/O with analog input A0_0 (ADC0), RTC_OUT, SPI1_CS1, TIMG8_C1 and TIMA_FAL2 functions. |
| 48 | VCORE | power_out | Regulated core power supply output that requires a 470nF to 0.47µF tank capacitor to VSS and must not have any external load or supply applied. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
## CAD (KiCad official)
- Symbol: `MSPM0G1105TPTR`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `mspm0g1105tptr-etched.step` / `mspm0g1105tptr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mspm0g1105tptr.step` / `mspm0g1105tptr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/mspm0g1105.pdf?ts=1704478027571&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US%2526searchTerm%253DMSPM0G1105TPTR%2526nr%253D4) (121 pp, sha256 `ec67551b3d3efdb2`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mspm0g1105tptr-datasheet.pdf)