main
Ray
Publish 0.1.0
1cde117
MSP430I2030TRHBR
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-32(5x5)
MSP430I2030TRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0.0+ | input | Positive analog input of SD24 channel A0.0; short unused analog input pairs and connect them to analog ground. |
| 2 | A0.0- | input | Negative analog input of SD24 channel A0.0; short unused analog input pairs and connect them to analog ground. |
| 3 | A1.0+ | input | Positive analog input of SD24 channel A1.0; short unused analog input pairs and connect them to analog ground. |
| 4 | A1.0- | input | Negative analog input of SD24 channel A1.0; short unused analog input pairs and connect them to analog ground. |
| 5 | A2.0+ | input | Positive analog input of SD24 channel A2.0; short unused analog input pairs and connect them to analog ground. |
| 6 | A2.0- | input | Negative analog input of SD24 channel A2.0; short unused analog input pairs and connect them to analog ground. |
| 7 | NC | unconnected | Not connected on the MSP430i2030 RHB package; TI recommends connecting NC pins to AVSS. |
| 8 | NC | unconnected | Not connected on the MSP430i2030 RHB package; TI recommends connecting NC pins to AVSS. |
| 9 | VREF | power_in | SD24 external reference voltage input; when SD24 uses the internal reference (SD24REFS = 1) do not load VREF externally and connect only the recommended capacitor CVREF to AVSS. |
| 10 | AVSS | power_in | Analog supply voltage, negative terminal (AVSS = DVSS = VSS = 0 V). |
| 11 | ROSC | passive | External resistor pin for the DCO: connect the recommended 20 kΩ, 0.1% resistor to AVSS in external resistor mode, or connect ROSC to AVSS in internal resistor mode, and apply no external DC loading. |
| 12 | DVSS | power_in | Digital supply voltage, negative terminal (AVSS = DVSS = VSS = 0 V). |
| 13 | VCC | power_in | Analog and digital supply voltage, positive terminal; 2.2 V to 3.6 V during program execution and flash programming or erase. |
| 14 | VCORE | power_out | Regulated 1.8 V core supply for internal use only; connect only the recommended 470 nF capacitor and apply no external DC loading. |
| 15 | RST/NMI/SBWTDIO | bidirectional | Reset or nonmaskable interrupt input and Spy-Bi-Wire data input/output; the pulse duration required at this pin to accept a reset is 4 µs minimum. |
| 16 | TEST/SBWTCK | input | Selects test mode for the JTAG pins on P1.0 to P1.3 and serves as Spy-Bi-Wire clock input; this pin always has an internal pulldown enabled. |
| 17 | P1.0/UCA0STE/MCLK/TCK | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 SPI slave transmit enable, MCLK output, and JTAG test clock input TCK. |
| 18 | P1.1/UCA0CLK/SMCLK/TMS | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 clock input/output, SMCLK output, and JTAG test mode select TMS. |
| 19 | P1.2/UCA0RXD/UCA0SOMI/ACLK/TDI/TCLK | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 UART receive or SPI slave out/master in, ACLK output, and JTAG data input or TCLK input. |
| 20 | P1.3/UCA0TXD/UCA0SIMO/TA0CLK/TDO/TDI | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 UART transmit or SPI slave in/master out, Timer TA0 external clock input TACLK, and JTAG data output TDO. |
| 21 | P1.4/UCB0STE/TA0.0 | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 SPI slave transmit enable and Timer TA0 CCR0 capture input CCI0A or compare output Out0. |
| 22 | P1.5/UCB0CLK/TA0.1 | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 clock input/output and Timer TA0 CCR1 capture input CCI1A or compare output Out1. |
| 23 | P1.6/UCB0SCL/UCB0SOMI/TA0.2 | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 I2C clock or SPI slave out/master in, and Timer TA0 CCR2 capture input CCI2A or compare output Out2. |
| 24 | P1.7/UCB0SDA/UCB0SIMO/TA1CLK | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 I2C data or SPI slave in/master out, and Timer TA1 external clock input TACLK. |
| 25 | P2.0/TA1.0/CLKIN | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR0 capture input CCI0A or compare output Out0, and DCO bypass clock input CLKIN. |
| 26 | P2.1/TA1.1 | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR1 capture input CCI1A or compare output Out1; this pin can wake the device from LPM4.5. |
| 27 | P2.2/TA1.2 | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR2 capture input CCI2A or compare output Out2; this pin can wake the device from LPM4.5. |
| 28 | P2.3/VMONIN | bidirectional | General-purpose digital I/O pin, also voltage monitor input VMONIN, which is enabled when VMONLVLx is set to 111b in the VMONCTL register. |
| 29 | P2.4/TA1.0 | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR0 capture input CCI0B or compare output Out0; this pin is not available on the 28-pin PW package. |
| 30 | P2.5/TA0.0 | bidirectional | General-purpose digital I/O pin, also Timer TA0 CCR0 capture input CCI0B or compare output Out0; this pin is not available on the 28-pin PW package. |
| 31 | P2.6/TA0.1 | bidirectional | General-purpose digital I/O pin, also Timer TA0 CCR1 compare output Out1; this pin is not available on the 28-pin PW package. |
| 32 | P2.7/TA0.2 | bidirectional | General-purpose digital I/O pin, also Timer TA0 CCR2 compare output Out2; this pin is not available on the 28-pin PW package. |
| 33 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage applied at VCC | VCC | -0.3 | 4.1 | V | 13 | ||
| Voltage applied to pins | -0.3 | V | All pins except VCORE, ROSC, and SD24 input pins; printed max is VCC + 0.3 V | 13 | |||
| Diode current at pins | -2 | 2 | mA | All pins except SD24 input pins | 13 | ||
| Diode current at SD24 input pins | 2 | mA | SD24 input pins A0.0+, A0.0-, A1.0+, A1.0-, A2.0+, A2.0-, A3.0+, A3.0- | 13 | |||
| Maximum junction temperature | TJ,MAX | 115 | °C | 13 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 13 | ||
| Electrostatic discharge, human-body model | V(ESD) | -1000 | 1000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 13 | |
| Electrostatic discharge, charged-device model | V(ESD) | -250 | 250 | V | CDM, per JEDEC JESD22-C101 | 13 | |
| Supply voltage during program execution and flash programming or erase | VCC | 2.2 | 3.6 | V | Program execution, flash programming or erase | 13 | |
| Operating free-air temperature | TA | -40 | 105 | °C | T temperature range | 13 | |
| Operating junction temperature | TJ | -40 | 105 | °C | T temperature range | 13 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 16.384 | MHz | 13 | ||
| Active mode current at 1.024 MHz | IAM, 1.024MHz | 1.6 | mA | fDCO = 16.384 MHz, fMCLK = fSMCLK = 1.024 MHz, fACLK = 32 kHz, program executes from flash, VCC = 3 V | 14 | ||
| Active mode current at 8.192 MHz | IAM, 8.192MHz | 3 | mA | fDCO = 16.384 MHz, fMCLK = fSMCLK = 8.192 MHz, fACLK = 32 kHz, program executes from flash, VCC = 3 V | 14 | ||
| Active mode current at 16.384 MHz | IAM, 16.384MHz | 4.5 | mA | fDCO = fMCLK = fSMCLK = 16.384 MHz, fACLK = 32 kHz, program executes from flash, VCC = 3 V | 14 | ||
| Low-power mode 3 (LPM3) current | ILPM3 | 210 | µA | fDCO = 16.384 MHz, fMCLK = fSMCLK = 0 MHz, fACLK = 32 kHz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0; 25°C, 3 V | 15 | ||
| Low-power mode 4 (LPM4) current | ILPM4 | 70 | µA | fDCO = fMCLK = fSMCLK = fACLK = 0 MHz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1; 25°C, 3 V | 15 | ||
| Low-power mode 4.5 (LPM4.5) current | ILPM4.5 | 75 | nA | fDCO = fMCLK = fSMCLK = fACLK = 0 MHz, REGOFF = 1, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1; 25°C, 3 V | 15 | ||
| Low-power mode 4.5 (LPM4.5) current | ILPM4.5 | 325 | nA | Same as 25°C row; 105°C, 3 V | 15 | ||
| DCO absolute tolerance, external resistor mode | -0.25 | 0.25 | % | Recommended 20 kΩ, 0.1%, ±50 ppm/°C ROSC resistor; calibrated, VCC = 3 V, TA = 25°C | 16 | ||
| DCO frequency temperature drift, external resistor mode | dfDCO/dT | -20 | 20 | ppm/°C | External resistor mode | 16 | |
| DCO frequency supply voltage drift, external resistor mode | dfDCO/dVCC | 200 | 600 | ppm/V | External resistor mode | 16 | |
| DCO current consumption, external resistor mode | IDCO | 85 | µA | External resistor mode | 16 | ||
| DCO absolute tolerance, internal resistor mode | -0.9 | 0.9 | % | Internal resistor mode; calibrated, VCC = 3 V, TA = 25°C | 16 | ||
| DCO frequency temperature drift, internal resistor mode | dfDCO/dT | -200 | 200 | ppm/°C | Internal resistor mode | 16 | |
| Frequency in DCO bypass mode | fDCOBYP | 0 | 16.384 | MHz | DCO bypass mode; SD24 performance needs 16.384 MHz | 17 | |
| Wake-up time from LPM3 to active mode | tWAKE-UP-LPM3 | 1 | µs | MCLK = SMCLK = 1.024 MHz | 17 | ||
| Wake-up time from LPM4 to active mode | tWAKE-UP-LPM4 | 45 | µs | MCLK = SMCLK = 1.024 MHz | 17 | ||
| Wake-up time from LPM4.5 to active mode upon I/O event | tWAKE-UP-LPM4.5-IO | 0.45 | ms | CVCORE = 470 nF | 17 | ||
| Wake-up time from LPM4.5 to active mode upon external reset | tWAKE-UP-LPM4.5-RESET | 0.45 | ms | CVCORE = 470 nF | 17 | ||
| Reset pulse duration required at RST/NMI pin to accept a reset | tRESET | 4 | µs | 16 | |||
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.1 | V | VCC = 3 V | 18 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC = 3 V | 18 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.4 | 1.1 | V | VCC = 3 V | 18 | |
| External interrupt timing | t(int) | 20 | ns | Port P1, P2: P1.x to P2.x, external trigger pulse duration to set interrupt flag; VCC = 3 V | 18 | ||
| High-impedance leakage current | Ilkg(Py.x) | -50 | 50 | nA | See (1) (2); VCC = 3 V | 18 | |
| Cold power-up time | tPOWERUP | 0.75 | ms | Time from application of VCC to execution of reset vector | 20 | ||
| Bandgap output voltage | VBG | 1.146 | 1.158 | 1.17 | V | Calibrated, VCC = 3 V | 21 |
| Temperature sensor output voltage | Vsensor | 610 | 650 | 690 | mV | VCC = 3 V, TA = 30°C | 21 |
| Analog plus digital supply current per SD24 converter | ISD24 | 190 | µA | SD24OSRx = 256, GAIN: 1, 2, 4, 8, 16; VCC 3 V | 22 | ||
| Analog plus digital supply current per SD24 converter | ISD24 | 250 | µA | SD24OSRx = 256, GAIN: 1, 16; VCC 3 V | 22 | ||
| SD24 internal reference voltage | VSD24REF | 1.146 | 1.158 | 1.17 | V | SD24REFS = 1, VCC 3 V | 22 |
| SD24 reference buffer settling time | tSD24REF_settle | 200 | µs | SD24REFS = 0 → 1, CVREF = 100 nF | 22 | ||
| SD24 input voltage range, external reference | VREF(I) | 1 | 1.2 | 1.5 | V | SD24REFS = 0, VCC 3 V | 22 |
| Differential input voltage range for specified performance | VID | -928 | 928 | mV | SD24REFS = 1, SD24GAINx = 1 | 22 | |
| Differential input voltage range for specified performance | VID | -58 | 58 | mV | SD24REFS = 1, SD24GAINx = 16 | 22 | |
| UART receive deglitch time | tt | 8 | 15 | 20 | ns | UCGLITx = 0; VCC 2.2 V, 3 V | 26 |
| STE lead time, STE active to clock | tSTE,LEAD | 150 | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC 2.2 V, 3 V | 26 | ||
| STE lag time, last clock to STE inactive | tSTE,LAG | 200 | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC 2.2 V, 3 V | 26 | ||
| STE access time, STE active to SIMO data out | tSTE,ACC | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC 3 V | 26 | ||
| STE disable time, STE inactive to SIMO high impedance | tSTE,DIS | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC 3 V | 26 | ||
| SIMO output data valid time | tVALID,MO | 5 | ns | UCLK edge to SIMO valid, CL = 20 pF; VCC 3 V | 26 | ||
| SOMI input data setup time | tSU,MI | 30 | ns | VCC 3 V | 26 | ||
| SOMI input data hold time | tHD,MI | 0 | ns | VCC 2.2 V, 3 V | 26 | ||
| Junction-to-ambient thermal resistance, still air (QFN-32 RHB) | RθJA | 35.9 | °C/W | 15 | |||
| Junction-to-case (top) thermal resistance (QFN-32 RHB) | RθJC(TOP) | 25.5 | °C/W | 15 | |||
| Junction-to-board thermal resistance (QFN-32 RHB) | RθJB | 8.6 | °C/W | 15 | |||
| Junction-to-board thermal characterization parameter (QFN-32 RHB) | ΨJB | 8.6 | °C/W | 15 | |||
| Junction-to-top thermal characterization parameter (QFN-32 RHB) | ΨJT | 0.3 | °C/W | 15 | |||
| Junction-to-case (bottom) thermal resistance (QFN-32 RHB) | RθJC(BOTTOM) | 1.4 | °C/W | 15 |
CAD (KiCad official)
- Symbol:
MSP430I2030TRHBR - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
msp430i2030trhbr-etched.step/msp430i2030trhbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430i2030trhbr.step/msp430i2030trhbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (81 pp, sha256
546ca9145d8b8883, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430I2030TRHBR
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-32(5x5)
MSP430I2030TRHBR from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0.0+ | input | Positive analog input of SD24 channel A0.0; short unused analog input pairs and connect them to analog ground. |
| 2 | A0.0- | input | Negative analog input of SD24 channel A0.0; short unused analog input pairs and connect them to analog ground. |
| 3 | A1.0+ | input | Positive analog input of SD24 channel A1.0; short unused analog input pairs and connect them to analog ground. |
| 4 | A1.0- | input | Negative analog input of SD24 channel A1.0; short unused analog input pairs and connect them to analog ground. |
| 5 | A2.0+ | input | Positive analog input of SD24 channel A2.0; short unused analog input pairs and connect them to analog ground. |
| 6 | A2.0- | input | Negative analog input of SD24 channel A2.0; short unused analog input pairs and connect them to analog ground. |
| 7 | NC | unconnected | Not connected on the MSP430i2030 RHB package; TI recommends connecting NC pins to AVSS. |
| 8 | NC | unconnected | Not connected on the MSP430i2030 RHB package; TI recommends connecting NC pins to AVSS. |
| 9 | VREF | power_in | SD24 external reference voltage input; when SD24 uses the internal reference (SD24REFS = 1) do not load VREF externally and connect only the recommended capacitor CVREF to AVSS. |
| 10 | AVSS | power_in | Analog supply voltage, negative terminal (AVSS = DVSS = VSS = 0 V). |
| 11 | ROSC | passive | External resistor pin for the DCO: connect the recommended 20 kΩ, 0.1% resistor to AVSS in external resistor mode, or connect ROSC to AVSS in internal resistor mode, and apply no external DC loading. |
| 12 | DVSS | power_in | Digital supply voltage, negative terminal (AVSS = DVSS = VSS = 0 V). |
| 13 | VCC | power_in | Analog and digital supply voltage, positive terminal; 2.2 V to 3.6 V during program execution and flash programming or erase. |
| 14 | VCORE | power_out | Regulated 1.8 V core supply for internal use only; connect only the recommended 470 nF capacitor and apply no external DC loading. |
| 15 | RST/NMI/SBWTDIO | bidirectional | Reset or nonmaskable interrupt input and Spy-Bi-Wire data input/output; the pulse duration required at this pin to accept a reset is 4 µs minimum. |
| 16 | TEST/SBWTCK | input | Selects test mode for the JTAG pins on P1.0 to P1.3 and serves as Spy-Bi-Wire clock input; this pin always has an internal pulldown enabled. |
| 17 | P1.0/UCA0STE/MCLK/TCK | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 SPI slave transmit enable, MCLK output, and JTAG test clock input TCK. |
| 18 | P1.1/UCA0CLK/SMCLK/TMS | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 clock input/output, SMCLK output, and JTAG test mode select TMS. |
| 19 | P1.2/UCA0RXD/UCA0SOMI/ACLK/TDI/TCLK | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 UART receive or SPI slave out/master in, ACLK output, and JTAG data input or TCLK input. |
| 20 | P1.3/UCA0TXD/UCA0SIMO/TA0CLK/TDO/TDI | bidirectional | General-purpose digital I/O pin, also eUSCI_A0 UART transmit or SPI slave in/master out, Timer TA0 external clock input TACLK, and JTAG data output TDO. |
| 21 | P1.4/UCB0STE/TA0.0 | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 SPI slave transmit enable and Timer TA0 CCR0 capture input CCI0A or compare output Out0. |
| 22 | P1.5/UCB0CLK/TA0.1 | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 clock input/output and Timer TA0 CCR1 capture input CCI1A or compare output Out1. |
| 23 | P1.6/UCB0SCL/UCB0SOMI/TA0.2 | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 I2C clock or SPI slave out/master in, and Timer TA0 CCR2 capture input CCI2A or compare output Out2. |
| 24 | P1.7/UCB0SDA/UCB0SIMO/TA1CLK | bidirectional | General-purpose digital I/O pin, also eUSCI_B0 I2C data or SPI slave in/master out, and Timer TA1 external clock input TACLK. |
| 25 | P2.0/TA1.0/CLKIN | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR0 capture input CCI0A or compare output Out0, and DCO bypass clock input CLKIN. |
| 26 | P2.1/TA1.1 | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR1 capture input CCI1A or compare output Out1; this pin can wake the device from LPM4.5. |
| 27 | P2.2/TA1.2 | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR2 capture input CCI2A or compare output Out2; this pin can wake the device from LPM4.5. |
| 28 | P2.3/VMONIN | bidirectional | General-purpose digital I/O pin, also voltage monitor input VMONIN, which is enabled when VMONLVLx is set to 111b in the VMONCTL register. |
| 29 | P2.4/TA1.0 | bidirectional | General-purpose digital I/O pin, also Timer TA1 CCR0 capture input CCI0B or compare output Out0; this pin is not available on the 28-pin PW package. |
| 30 | P2.5/TA0.0 | bidirectional | General-purpose digital I/O pin, also Timer TA0 CCR0 capture input CCI0B or compare output Out0; this pin is not available on the 28-pin PW package. |
| 31 | P2.6/TA0.1 | bidirectional | General-purpose digital I/O pin, also Timer TA0 CCR1 compare output Out1; this pin is not available on the 28-pin PW package. |
| 32 | P2.7/TA0.2 | bidirectional | General-purpose digital I/O pin, also Timer TA0 CCR2 compare output Out2; this pin is not available on the 28-pin PW package. |
| 33 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage applied at VCC | VCC | -0.3 | | 4.1 | V | | 13 |
| Voltage applied to pins | | -0.3 | | | V | All pins except VCORE, ROSC, and SD24 input pins; printed max is VCC + 0.3 V | 13 |
| Diode current at pins | | -2 | | 2 | mA | All pins except SD24 input pins | 13 |
| Diode current at SD24 input pins | | | | 2 | mA | SD24 input pins A0.0+, A0.0-, A1.0+, A1.0-, A2.0+, A2.0-, A3.0+, A3.0- | 13 |
| Maximum junction temperature | TJ,MAX | | | 115 | °C | | 13 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 13 |
| Electrostatic discharge, human-body model | V(ESD) | -1000 | | 1000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 13 |
| Electrostatic discharge, charged-device model | V(ESD) | -250 | | 250 | V | CDM, per JEDEC JESD22-C101 | 13 |
| Supply voltage during program execution and flash programming or erase | VCC | 2.2 | | 3.6 | V | Program execution, flash programming or erase | 13 |
| Operating free-air temperature | TA | -40 | | 105 | °C | T temperature range | 13 |
| Operating junction temperature | TJ | -40 | | 105 | °C | T temperature range | 13 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | | 16.384 | MHz | | 13 |
| Active mode current at 1.024 MHz | IAM, 1.024MHz | | | 1.6 | mA | fDCO = 16.384 MHz, fMCLK = fSMCLK = 1.024 MHz, fACLK = 32 kHz, program executes from flash, VCC = 3 V | 14 |
| Active mode current at 8.192 MHz | IAM, 8.192MHz | | | 3 | mA | fDCO = 16.384 MHz, fMCLK = fSMCLK = 8.192 MHz, fACLK = 32 kHz, program executes from flash, VCC = 3 V | 14 |
| Active mode current at 16.384 MHz | IAM, 16.384MHz | | | 4.5 | mA | fDCO = fMCLK = fSMCLK = 16.384 MHz, fACLK = 32 kHz, program executes from flash, VCC = 3 V | 14 |
| Low-power mode 3 (LPM3) current | ILPM3 | | | 210 | µA | fDCO = 16.384 MHz, fMCLK = fSMCLK = 0 MHz, fACLK = 32 kHz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0; 25°C, 3 V | 15 |
| Low-power mode 4 (LPM4) current | ILPM4 | | | 70 | µA | fDCO = fMCLK = fSMCLK = fACLK = 0 MHz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1; 25°C, 3 V | 15 |
| Low-power mode 4.5 (LPM4.5) current | ILPM4.5 | | | 75 | nA | fDCO = fMCLK = fSMCLK = fACLK = 0 MHz, REGOFF = 1, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1; 25°C, 3 V | 15 |
| Low-power mode 4.5 (LPM4.5) current | ILPM4.5 | | | 325 | nA | Same as 25°C row; 105°C, 3 V | 15 |
| DCO absolute tolerance, external resistor mode | | -0.25 | | 0.25 | % | Recommended 20 kΩ, 0.1%, ±50 ppm/°C ROSC resistor; calibrated, VCC = 3 V, TA = 25°C | 16 |
| DCO frequency temperature drift, external resistor mode | dfDCO/dT | -20 | | 20 | ppm/°C | External resistor mode | 16 |
| DCO frequency supply voltage drift, external resistor mode | dfDCO/dVCC | | 200 | 600 | ppm/V | External resistor mode | 16 |
| DCO current consumption, external resistor mode | IDCO | | | 85 | µA | External resistor mode | 16 |
| DCO absolute tolerance, internal resistor mode | | -0.9 | | 0.9 | % | Internal resistor mode; calibrated, VCC = 3 V, TA = 25°C | 16 |
| DCO frequency temperature drift, internal resistor mode | dfDCO/dT | -200 | | 200 | ppm/°C | Internal resistor mode | 16 |
| Frequency in DCO bypass mode | fDCOBYP | 0 | | 16.384 | MHz | DCO bypass mode; SD24 performance needs 16.384 MHz | 17 |
| Wake-up time from LPM3 to active mode | tWAKE-UP-LPM3 | | | 1 | µs | MCLK = SMCLK = 1.024 MHz | 17 |
| Wake-up time from LPM4 to active mode | tWAKE-UP-LPM4 | | | 45 | µs | MCLK = SMCLK = 1.024 MHz | 17 |
| Wake-up time from LPM4.5 to active mode upon I/O event | tWAKE-UP-LPM4.5-IO | | | 0.45 | ms | CVCORE = 470 nF | 17 |
| Wake-up time from LPM4.5 to active mode upon external reset | tWAKE-UP-LPM4.5-RESET | | | 0.45 | ms | CVCORE = 470 nF | 17 |
| Reset pulse duration required at RST/NMI pin to accept a reset | tRESET | 4 | | | µs | | 16 |
| Positive-going input threshold voltage | VIT+ | 1.5 | | 2.1 | V | VCC = 3 V | 18 |
| Negative-going input threshold voltage | VIT- | 0.75 | | 1.65 | V | VCC = 3 V | 18 |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.4 | | 1.1 | V | VCC = 3 V | 18 |
| External interrupt timing | t(int) | 20 | | | ns | Port P1, P2: P1.x to P2.x, external trigger pulse duration to set interrupt flag; VCC = 3 V | 18 |
| High-impedance leakage current | Ilkg(Py.x) | -50 | | 50 | nA | See (1) (2); VCC = 3 V | 18 |
| Cold power-up time | tPOWERUP | | | 0.75 | ms | Time from application of VCC to execution of reset vector | 20 |
| Bandgap output voltage | VBG | 1.146 | 1.158 | 1.17 | V | Calibrated, VCC = 3 V | 21 |
| Temperature sensor output voltage | Vsensor | 610 | 650 | 690 | mV | VCC = 3 V, TA = 30°C | 21 |
| Analog plus digital supply current per SD24 converter | ISD24 | | | 190 | µA | SD24OSRx = 256, GAIN: 1, 2, 4, 8, 16; VCC 3 V | 22 |
| Analog plus digital supply current per SD24 converter | ISD24 | | | 250 | µA | SD24OSRx = 256, GAIN: 1, 16; VCC 3 V | 22 |
| SD24 internal reference voltage | VSD24REF | 1.146 | 1.158 | 1.17 | V | SD24REFS = 1, VCC 3 V | 22 |
| SD24 reference buffer settling time | tSD24REF_settle | | | 200 | µs | SD24REFS = 0 → 1, CVREF = 100 nF | 22 |
| SD24 input voltage range, external reference | VREF(I) | 1 | 1.2 | 1.5 | V | SD24REFS = 0, VCC 3 V | 22 |
| Differential input voltage range for specified performance | VID | -928 | | 928 | mV | SD24REFS = 1, SD24GAINx = 1 | 22 |
| Differential input voltage range for specified performance | VID | -58 | | 58 | mV | SD24REFS = 1, SD24GAINx = 16 | 22 |
| UART receive deglitch time | tt | 8 | 15 | 20 | ns | UCGLITx = 0; VCC 2.2 V, 3 V | 26 |
| STE lead time, STE active to clock | tSTE,LEAD | 150 | | | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC 2.2 V, 3 V | 26 |
| STE lag time, last clock to STE inactive | tSTE,LAG | 200 | | | ns | UCSTEM = 1, UCMODEx = 01 or 10; VCC 2.2 V, 3 V | 26 |
| STE access time, STE active to SIMO data out | tSTE,ACC | | | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC 3 V | 26 |
| STE disable time, STE inactive to SIMO high impedance | tSTE,DIS | | | 30 | ns | UCSTEM = 0, UCMODEx = 01 or 10; VCC 3 V | 26 |
| SIMO output data valid time | tVALID,MO | | | 5 | ns | UCLK edge to SIMO valid, CL = 20 pF; VCC 3 V | 26 |
| SOMI input data setup time | tSU,MI | 30 | | | ns | VCC 3 V | 26 |
| SOMI input data hold time | tHD,MI | 0 | | | ns | VCC 2.2 V, 3 V | 26 |
| Junction-to-ambient thermal resistance, still air (QFN-32 RHB) | RθJA | | 35.9 | | °C/W | | 15 |
| Junction-to-case (top) thermal resistance (QFN-32 RHB) | RθJC(TOP) | | 25.5 | | °C/W | | 15 |
| Junction-to-board thermal resistance (QFN-32 RHB) | RθJB | | 8.6 | | °C/W | | 15 |
| Junction-to-board thermal characterization parameter (QFN-32 RHB) | ΨJB | | 8.6 | | °C/W | | 15 |
| Junction-to-top thermal characterization parameter (QFN-32 RHB) | ΨJT | | 0.3 | | °C/W | | 15 |
| Junction-to-case (bottom) thermal resistance (QFN-32 RHB) | RθJC(BOTTOM) | | 1.4 | | °C/W | | 15 |
## CAD (KiCad official)
- Symbol: `MSP430I2030TRHBR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files: `msp430i2030trhbr-etched.step` / `msp430i2030trhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430i2030trhbr.step` / `msp430i2030trhbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430i2030.pdf) (81 pp, sha256 `546ca9145d8b8883`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430i2030trhbr-datasheet.pdf)