main
Ray
Publish 0.1.0
3183a99
MSP430G2955IRHA40R
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-40-EP(6x6)
MSP430G2955IRHA40R from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVSS | power_in | Digital ground reference. |
| 2 | XOUT/P2.7 | bidirectional | Output terminal of the crystal oscillator, also general-purpose digital I/O P2.7. |
| 3 | XIN/P2.6 | bidirectional | Input terminal of the crystal oscillator, also general-purpose digital I/O P2.6. |
| 4 | DVSS | power_in | Digital ground reference. |
| 5 | RST/NMI/SBWTDIO | input | Reset or nonmaskable interrupt input; also Spy-Bi-Wire test data input/output during programming and test. |
| 6 | P2.0/TA1CLK/ACLK/A0 | bidirectional | General-purpose digital I/O; also Timer1_A TACLK input, ACLK output, and ADC10 analog input A0. |
| 7 | P2.1/TA0INCLK/SMCLK/A1 | bidirectional | General-purpose digital I/O; also Timer_A INCLK clock input, SMCLK output, and ADC10 analog input A1. |
| 8 | P2.2/TA0.0/A2 | bidirectional | General-purpose digital I/O; also Timer_A CCI0B input or BSL receive, compare OUT0 output, and ADC10 analog input A2. |
| 9 | P3.0/UCB0STE/UCA0CLK/A5 | bidirectional | General-purpose digital I/O; also USCI_B0 slave transmit enable, USCI_A0 clock input/output, and ADC10 analog input A5. |
| 10 | P3.1/UCB0SIMO/UCB0SDA | bidirectional | General-purpose digital I/O; also USCI_B0 slave in/master out in SPI mode and I2C data in I2C mode. |
| 11 | P3.2/UCB0SOMI/UCB0SCL | bidirectional | General-purpose digital I/O; also USCI_B0 slave out/master in in SPI mode and I2C clock in I2C mode. |
| 12 | P3.3/UCB0CLK/UCA0STE | bidirectional | General-purpose digital I/O; also USCI_B0 clock input/output and USCI_A0 slave transmit enable. |
| 13 | AVSS | power_in | Analog ground reference. |
| 14 | AVCC | power_in | Analog supply voltage. |
| 15 | P4.0/TB0.0/CA0 | bidirectional | General-purpose digital I/O; also Timer_B CCI0A input, compare OUT0 output, and Comparator_A+ CA0 input. |
| 16 | P4.1/TB0.1/CA1 | bidirectional | General-purpose digital I/O; also Timer_B CCI1A input, compare OUT1 output, and Comparator_A+ CA1 input. |
| 17 | P4.2/TB0.2/CA2 | bidirectional | General-purpose digital I/O; also Timer_B CCI2A input, compare OUT2 output, and Comparator_A+ CA2 input. |
| 18 | P4.3/TB0.0/A12/CA3 | bidirectional | General-purpose digital I/O; also Timer_B CCI0B input, compare OUT0 output, ADC10 analog input A12, and Comparator_A+ CA3 input. |
| 19 | P4.4/TB0.1/A13/CA4 | bidirectional | General-purpose digital I/O; also Timer_B CCI1B input, compare OUT1 output, ADC10 analog input A13, and Comparator_A+ CA4 input. |
| 20 | P4.5/TB0.2/A14/CA5 | bidirectional | General-purpose digital I/O; also Timer_B compare OUT2 output, ADC10 analog input A14, and Comparator_A+ CA5 input. |
| 21 | P4.6/TB0OUTH/A15/CA6 | bidirectional | General-purpose digital I/O; also Timer_B high-impedance control for TB0 to TB3 outputs, Comparator_A+ output, ADC10 analog input A15, and Comparator_A+ CA6 input. |
| 22 | P4.7/TB0CLK/CA7 | bidirectional | General-purpose digital I/O; also Timer_B TBCLK clock input, Comparator_A+ output, and Comparator_A+ CA7 input. |
| 23 | P3.4/UCA0TXD/UCA0SIMO | bidirectional | General-purpose digital I/O; also USCI_A0 transmit data output in UART mode and slave in/master out in SPI mode. |
| 24 | P3.5/UCA0RXD/UCA0SOMI | bidirectional | General-purpose digital I/O; also USCI_A0 receive data input in UART mode and slave out/master in in SPI mode. |
| 25 | P3.6/TA1.1/A6 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI1B input or BSL receive, compare OUT2 output, and ADC10 analog input A6. |
| 26 | P3.7/TA1.2/A7 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI2B input or BSL receive, compare OUT2 output, and ADC10 analog input A7. |
| 27 | P2.3/TA0.1/A3/VREF-/VEREF- | bidirectional | General-purpose digital I/O; also Timer_A CCI1B input, compare OUT1 output, ADC10 analog input A3, and negative reference voltage output or input. |
| 28 | P2.4/TA0.2/A4/VREF+/VEREF+ | bidirectional | General-purpose digital I/O; also Timer_A compare OUT2 output, ADC10 analog input A4, and positive reference voltage output or input. |
| 29 | P1.0/TA0CLK/ADC10CLK | bidirectional | General-purpose digital I/O; also Timer_A clock input TACLK and ADC10 conversion clock. |
| 30 | P1.1/TA0.0 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI0A input, compare OUT0 output, or BSL transmit. |
| 31 | P1.2/TA0.1 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI1A input and compare OUT1 output. |
| 32 | P1.3/TA0.2 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI2A input and compare OUT2 output. |
| 33 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O; also SMCLK signal output and JTAG test clock input for device programming and test. |
| 34 | P1.5/TA0.0/TMS | bidirectional | General-purpose digital I/O; also Timer_A compare OUT0 output and JTAG test mode select input. |
| 35 | P1.6/TA0.1/TDI/TCLK | bidirectional | General-purpose digital I/O; also Timer_A compare OUT1 output and JTAG test data input and test clock input. |
| 36 | P1.7/TA0.2/TDO/TDI | bidirectional | General-purpose digital I/O; also Timer_A compare OUT2 output and JTAG test data output or input during programming and test. |
| 37 | TEST/SBWTCK | input | Selects test mode for JTAG pins on Port 1; also Spy-Bi-Wire test clock input during programming and test. |
| 38 | DVCC | power_in | Digital supply voltage. |
| 39 | DVCC | power_in | Digital supply voltage. |
| 40 | P2.5/TA1.0/ROSC | bidirectional | General-purpose digital I/O; also Timer_A capture CCI0B input or BSL receive, compare OUT0 output, and input for external DCO resistor to define DCO frequency. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40-EP(6x6) |
| Category | Embedded Processors & Controllers |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution | VCC | 1.8 | 3.6 | V | During program execution | 19 | |
| Supply voltage during flash programming or erase | VCC | 2.2 | 3.6 | V | During flash programming or erase | 19 | |
| Operating free-air temperature | TA | -40 | 85 | °C | 19 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 6 | MHz | VCC = 1.8 V, duty cycle 50% ± 10% | 19 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 12 | MHz | VCC = 2.7 V, duty cycle 50% ± 10% | 19 | ||
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 16 | MHz | VCC = 3.3 V, duty cycle 50% ± 10% | 19 | ||
| Voltage applied at VCC to VSS | -0.3 | 4.1 | V | 19 | |||
| Voltage applied to any pin | -0.3 | V | Maximum printed as VCC + 0.3 V; all voltages referenced to VSS | 19 | |||
| Diode current at any device pin | -2 | 2 | mA | 19 | |||
| Storage temperature range, Tstg (unprogrammed device) | Tstg | -55 | 150 | °C | Unprogrammed device | 19 | |
| Storage temperature range, Tstg (programmed device) | Tstg | -55 | 150 | °C | Programmed device | 19 | |
| Active mode current at 1 MHz | IAM,1MHz | 350 | 450 | µA | fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, VCC = 3 V | 20 | |
| Low-power mode 3 current, LFXT1 clock | ILPM3,LFXT1 | 1 | 1.5 | µA | 25°C, VCC = 2.2 V, fACLK = 32768 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 | 21 | |
| Low-power mode 3 current, VLO clock | ILPM3,VLO | 0.5 | 0.7 | µA | 25°C, VCC = 2.2 V, fACLK from VLO, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 | 21 | |
| Low-power mode 4 current | ILPM4 | 0.1 | 0.5 | µA | 25°C, VCC = 2.2 V, fACLK = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 21 | |
| Low-power mode 4 current | ILPM4 | 1.6 | 2.5 | µA | 85°C, VCC = 2.2 V, fACLK = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 21 | |
| Positive-going input threshold voltage | VIT+ | 1.35 | 2.25 | V | VCC = 3 V, Schmitt-trigger inputs Px | 22 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC = 3 V, Schmitt-trigger inputs Px | 22 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.3 | 1 | V | VCC = 3 V | 22 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | 3 V; pullup VIN = VSS, pulldown VIN = VCC | 22 |
| High-impedance leakage current | Ilkg(Px.y) | -50 | 50 | nA | 3 V | 22 | |
| Port output frequency with load | fPx.y | 12 | MHz | Px.y, CL = 20 pF, RL = 1 kΩ, 3 V | 22 | ||
| Clock output frequency | fPort_CLK | 16 | MHz | Px.y, CL = 20 pF, 3 V | 22 | ||
| Supply voltage for DCO, RSELx < 14 | VCC | 1.8 | 3.6 | V | RSELx < 14 | 27 | |
| Supply voltage for DCO, RSELx = 14 | VCC | 2.2 | 3.6 | V | RSELx = 14 | 27 | |
| Supply voltage for DCO, RSELx = 15 | VCC | 3 | 3.6 | V | RSELx = 15 | 27 | |
| DCO frequency (0, 0) | fDCO(0,0) | 0.06 | 0.14 | MHz | RSELx = 0, DCOx = 0, MODx = 0, 3 V | 27 | |
| DCO frequency (0, 3) | fDCO(0,3) | 0.07 | 0.17 | MHz | RSELx = 0, DCOx = 3, MODx = 0, 3 V | 27 | |
| DCO frequency (6, 3) | fDCO(6,3) | 0.54 | 1.06 | MHz | RSELx = 6, DCOx = 3, MODx = 0, 3 V | 27 | |
| DCO frequency (7, 3) | fDCO(7,3) | 0.8 | 1.5 | MHz | RSELx = 7, DCOx = 3, MODx = 0, 3 V | 27 | |
| DCO frequency (12, 3) | fDCO(12,3) | 4.3 | 7.3 | MHz | RSELx = 12, DCOx = 3, MODx = 0, 3 V | 27 | |
| DCO frequency (13, 3) | fDCO(13,3) | 6 | 7.8 | 9.6 | MHz | RSELx = 13, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (14, 3) | fDCO(14,3) | 8.6 | 13.9 | MHz | RSELx = 14, DCOx = 3, MODx = 0, 3 V | 27 | |
| DCO frequency (15, 3) | fDCO(15,3) | 12 | 18.5 | MHz | RSELx = 15, DCOx = 3, MODx = 0, 3 V | 27 | |
| DCO frequency (15, 7) | fDCO(15,7) | 16 | 26 | MHz | RSELx = 15, DCOx = 7, MODx = 0, 3 V | 27 | |
| 1-MHz tolerance overall | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, -40°C to 85°C, 1.8 V to 3.6 V, calibrated at 30°C and 3 V | 28 | |
| 8-MHz tolerance overall | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ, -40°C to 85°C, 2.2 V to 3.6 V, calibrated at 30°C and 3 V | 28 | |
| 12-MHz tolerance overall | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ, -40°C to 85°C, 2.7 V to 3.6 V, calibrated at 30°C and 3 V | 28 | |
| 16-MHz tolerance overall | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_16MHZ, DCOCTL = CALDCO_16MHZ, -40°C to 85°C, 3.3 V to 3.6 V, calibrated at 30°C and 3 V | 28 | |
| DCO temperature drift with external resistor ROSC | DT | -0.1 | 0.1 | %/°C | DCOR = 1, RSELx = 4, DCOx = 3, MODx = 0, 3 V | 30 | |
| VLO frequency | fVLO | 4 | 12 | 20 | kHz | -40°C to 85°C, 3 V | 31 |
| LFXT1 oscillator logic-level square-wave input frequency, LF mode | fLFXT1,LF,logic | 10000 | 32768 | 50000 | Hz | XTS = 0, XCAPx = 0, LFXT1Sx = 3, 1.8 V to 3.6 V | 31 |
| LFXT1 oscillator crystal frequency, HF mode 0 | fLFXT1,HF0 | 0.4 | 1 | MHz | XTS = 1, LFXT1Sx = 0, 1.8 V to 3.6 V | 32 | |
| LFXT1 oscillator crystal frequency, HF mode 1 | fLFXT1,HF1 | 1 | 4 | MHz | XTS = 1, LFXT1Sx = 1, 1.8 V to 3.6 V | 32 | |
| LFXT1 oscillator crystal frequency, HF mode 2 | fLFXT1,HF2 | 2 | 10 | MHz | XTS = 1, LFXT1Sx = 2, 1.8 V to 3.6 V | 32 | |
| LFXT1 oscillator crystal frequency, HF mode 2 | fLFXT1,HF2 | 2 | 16 | MHz | XTS = 1, LFXT1Sx = 2, 3 V to 3.6 V | 32 | |
| LFXT1 oscillator logic-level square-wave input frequency, HF mode 3 | fLFXT1,HF,logic | 0.4 | 10 | MHz | XTS = 1, LFXT1Sx = 3, 1.8 V to 3.6 V | 32 | |
| Oscillator fault frequency, HF mode | fFault,HF | 30 | 300 | kHz | XTS = 1, LFXT1Sx = 3, 2.2 V, 3 V | 32 | |
| Duty cycle, HF mode at 10 MHz | 40 | 50 | 60 | % | XTS = 1, measured at P2.0/ACLK, fLFXT1,HF = 10 MHz, 2.2 V, 3 V | 32 | |
| Duty cycle, LF mode | 30 | 50 | 70 | % | XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz, 2.2 V | 31 | |
| USCI maximum BITCLK clock frequency (UART) | fmax,BITCLK | 2 | MHz | 3 V; equals baudrate in MBaud | 34 | ||
| UART receive deglitch time | tτ | 50 | 100 | 600 | ns | 3 V | 34 |
| SCL clock frequency (I2C) | fSCL | 0 | 400 | kHz | 3 V | 36 | |
| Pulse duration of spikes suppressed by input filter (I2C) | tSP | 50 | 100 | 600 | ns | 3 V | 36 |
| Offset voltage, Comparator_A+ | V(offset) | -10 | 10 | mV | 3 V | 36 | |
| Analog supply voltage | VCC | 2.2 | 3.6 | V | VSS = 0 V | 38 | |
| Positive built-in reference voltage | VREF+ | 1.41 | 1.5 | 1.59 | V | 3 V, IVREF+ ≤ IVREF+max, REF2_5V = 0 | 39 |
| Temperature coefficient of built-in reference | TCREF+ | -100 | 100 | ppm/°C | IVREF+ = const with 0 mA ≤ IVREF+ ≤ 1 mA, 3 V | 39 |
CAD (KiCad official)
- Symbol:
MSP430G2955IRHA40R - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
msp430g2955irha40r-etched.step/msp430g2955irha40r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430g2955irha40r.step/msp430g2955irha40r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (75 pp, sha256
79ef358a23e21191, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MSP430G2955IRHA40R
**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-40-EP(6x6)
MSP430G2955IRHA40R from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVSS | power_in | Digital ground reference. |
| 2 | XOUT/P2.7 | bidirectional | Output terminal of the crystal oscillator, also general-purpose digital I/O P2.7. |
| 3 | XIN/P2.6 | bidirectional | Input terminal of the crystal oscillator, also general-purpose digital I/O P2.6. |
| 4 | DVSS | power_in | Digital ground reference. |
| 5 | RST/NMI/SBWTDIO | input | Reset or nonmaskable interrupt input; also Spy-Bi-Wire test data input/output during programming and test. |
| 6 | P2.0/TA1CLK/ACLK/A0 | bidirectional | General-purpose digital I/O; also Timer1_A TACLK input, ACLK output, and ADC10 analog input A0. |
| 7 | P2.1/TA0INCLK/SMCLK/A1 | bidirectional | General-purpose digital I/O; also Timer_A INCLK clock input, SMCLK output, and ADC10 analog input A1. |
| 8 | P2.2/TA0.0/A2 | bidirectional | General-purpose digital I/O; also Timer_A CCI0B input or BSL receive, compare OUT0 output, and ADC10 analog input A2. |
| 9 | P3.0/UCB0STE/UCA0CLK/A5 | bidirectional | General-purpose digital I/O; also USCI_B0 slave transmit enable, USCI_A0 clock input/output, and ADC10 analog input A5. |
| 10 | P3.1/UCB0SIMO/UCB0SDA | bidirectional | General-purpose digital I/O; also USCI_B0 slave in/master out in SPI mode and I2C data in I2C mode. |
| 11 | P3.2/UCB0SOMI/UCB0SCL | bidirectional | General-purpose digital I/O; also USCI_B0 slave out/master in in SPI mode and I2C clock in I2C mode. |
| 12 | P3.3/UCB0CLK/UCA0STE | bidirectional | General-purpose digital I/O; also USCI_B0 clock input/output and USCI_A0 slave transmit enable. |
| 13 | AVSS | power_in | Analog ground reference. |
| 14 | AVCC | power_in | Analog supply voltage. |
| 15 | P4.0/TB0.0/CA0 | bidirectional | General-purpose digital I/O; also Timer_B CCI0A input, compare OUT0 output, and Comparator_A+ CA0 input. |
| 16 | P4.1/TB0.1/CA1 | bidirectional | General-purpose digital I/O; also Timer_B CCI1A input, compare OUT1 output, and Comparator_A+ CA1 input. |
| 17 | P4.2/TB0.2/CA2 | bidirectional | General-purpose digital I/O; also Timer_B CCI2A input, compare OUT2 output, and Comparator_A+ CA2 input. |
| 18 | P4.3/TB0.0/A12/CA3 | bidirectional | General-purpose digital I/O; also Timer_B CCI0B input, compare OUT0 output, ADC10 analog input A12, and Comparator_A+ CA3 input. |
| 19 | P4.4/TB0.1/A13/CA4 | bidirectional | General-purpose digital I/O; also Timer_B CCI1B input, compare OUT1 output, ADC10 analog input A13, and Comparator_A+ CA4 input. |
| 20 | P4.5/TB0.2/A14/CA5 | bidirectional | General-purpose digital I/O; also Timer_B compare OUT2 output, ADC10 analog input A14, and Comparator_A+ CA5 input. |
| 21 | P4.6/TB0OUTH/A15/CA6 | bidirectional | General-purpose digital I/O; also Timer_B high-impedance control for TB0 to TB3 outputs, Comparator_A+ output, ADC10 analog input A15, and Comparator_A+ CA6 input. |
| 22 | P4.7/TB0CLK/CA7 | bidirectional | General-purpose digital I/O; also Timer_B TBCLK clock input, Comparator_A+ output, and Comparator_A+ CA7 input. |
| 23 | P3.4/UCA0TXD/UCA0SIMO | bidirectional | General-purpose digital I/O; also USCI_A0 transmit data output in UART mode and slave in/master out in SPI mode. |
| 24 | P3.5/UCA0RXD/UCA0SOMI | bidirectional | General-purpose digital I/O; also USCI_A0 receive data input in UART mode and slave out/master in in SPI mode. |
| 25 | P3.6/TA1.1/A6 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI1B input or BSL receive, compare OUT2 output, and ADC10 analog input A6. |
| 26 | P3.7/TA1.2/A7 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI2B input or BSL receive, compare OUT2 output, and ADC10 analog input A7. |
| 27 | P2.3/TA0.1/A3/VREF-/VEREF- | bidirectional | General-purpose digital I/O; also Timer_A CCI1B input, compare OUT1 output, ADC10 analog input A3, and negative reference voltage output or input. |
| 28 | P2.4/TA0.2/A4/VREF+/VEREF+ | bidirectional | General-purpose digital I/O; also Timer_A compare OUT2 output, ADC10 analog input A4, and positive reference voltage output or input. |
| 29 | P1.0/TA0CLK/ADC10CLK | bidirectional | General-purpose digital I/O; also Timer_A clock input TACLK and ADC10 conversion clock. |
| 30 | P1.1/TA0.0 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI0A input, compare OUT0 output, or BSL transmit. |
| 31 | P1.2/TA0.1 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI1A input and compare OUT1 output. |
| 32 | P1.3/TA0.2 | bidirectional | General-purpose digital I/O; also Timer_A capture CCI2A input and compare OUT2 output. |
| 33 | P1.4/SMCLK/TCK | bidirectional | General-purpose digital I/O; also SMCLK signal output and JTAG test clock input for device programming and test. |
| 34 | P1.5/TA0.0/TMS | bidirectional | General-purpose digital I/O; also Timer_A compare OUT0 output and JTAG test mode select input. |
| 35 | P1.6/TA0.1/TDI/TCLK | bidirectional | General-purpose digital I/O; also Timer_A compare OUT1 output and JTAG test data input and test clock input. |
| 36 | P1.7/TA0.2/TDO/TDI | bidirectional | General-purpose digital I/O; also Timer_A compare OUT2 output and JTAG test data output or input during programming and test. |
| 37 | TEST/SBWTCK | input | Selects test mode for JTAG pins on Port 1; also Spy-Bi-Wire test clock input during programming and test. |
| 38 | DVCC | power_in | Digital supply voltage. |
| 39 | DVCC | power_in | Digital supply voltage. |
| 40 | P2.5/TA1.0/ROSC | bidirectional | General-purpose digital I/O; also Timer_A capture CCI0B input or BSL receive, compare OUT0 output, and input for external DCO resistor to define DCO frequency. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40-EP(6x6) |
| Category | Embedded Processors & Controllers |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage during program execution | VCC | 1.8 | | 3.6 | V | During program execution | 19 |
| Supply voltage during flash programming or erase | VCC | 2.2 | | 3.6 | V | During flash programming or erase | 19 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 19 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | | | 6 | MHz | VCC = 1.8 V, duty cycle 50% ± 10% | 19 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | | | 12 | MHz | VCC = 2.7 V, duty cycle 50% ± 10% | 19 |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | | | 16 | MHz | VCC = 3.3 V, duty cycle 50% ± 10% | 19 |
| Voltage applied at VCC to VSS | | -0.3 | | 4.1 | V | | 19 |
| Voltage applied to any pin | | -0.3 | | | V | Maximum printed as VCC + 0.3 V; all voltages referenced to VSS | 19 |
| Diode current at any device pin | | -2 | | 2 | mA | | 19 |
| Storage temperature range, Tstg (unprogrammed device) | Tstg | -55 | | 150 | °C | Unprogrammed device | 19 |
| Storage temperature range, Tstg (programmed device) | Tstg | -55 | | 150 | °C | Programmed device | 19 |
| Active mode current at 1 MHz | IAM,1MHz | | 350 | 450 | µA | fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, VCC = 3 V | 20 |
| Low-power mode 3 current, LFXT1 clock | ILPM3,LFXT1 | | 1 | 1.5 | µA | 25°C, VCC = 2.2 V, fACLK = 32768 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 | 21 |
| Low-power mode 3 current, VLO clock | ILPM3,VLO | | 0.5 | 0.7 | µA | 25°C, VCC = 2.2 V, fACLK from VLO, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 0 | 21 |
| Low-power mode 4 current | ILPM4 | | 0.1 | 0.5 | µA | 25°C, VCC = 2.2 V, fACLK = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 21 |
| Low-power mode 4 current | ILPM4 | | 1.6 | 2.5 | µA | 85°C, VCC = 2.2 V, fACLK = 0 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1, OSCOFF = 1 | 21 |
| Positive-going input threshold voltage | VIT+ | 1.35 | | 2.25 | V | VCC = 3 V, Schmitt-trigger inputs Px | 22 |
| Negative-going input threshold voltage | VIT- | 0.75 | | 1.65 | V | VCC = 3 V, Schmitt-trigger inputs Px | 22 |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.3 | | 1 | V | VCC = 3 V | 22 |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | 3 V; pullup VIN = VSS, pulldown VIN = VCC | 22 |
| High-impedance leakage current | Ilkg(Px.y) | -50 | | 50 | nA | 3 V | 22 |
| Port output frequency with load | fPx.y | | | 12 | MHz | Px.y, CL = 20 pF, RL = 1 kΩ, 3 V | 22 |
| Clock output frequency | fPort_CLK | | | 16 | MHz | Px.y, CL = 20 pF, 3 V | 22 |
| Supply voltage for DCO, RSELx < 14 | VCC | 1.8 | | 3.6 | V | RSELx < 14 | 27 |
| Supply voltage for DCO, RSELx = 14 | VCC | 2.2 | | 3.6 | V | RSELx = 14 | 27 |
| Supply voltage for DCO, RSELx = 15 | VCC | 3 | | 3.6 | V | RSELx = 15 | 27 |
| DCO frequency (0, 0) | fDCO(0,0) | 0.06 | | 0.14 | MHz | RSELx = 0, DCOx = 0, MODx = 0, 3 V | 27 |
| DCO frequency (0, 3) | fDCO(0,3) | 0.07 | | 0.17 | MHz | RSELx = 0, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (6, 3) | fDCO(6,3) | 0.54 | | 1.06 | MHz | RSELx = 6, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (7, 3) | fDCO(7,3) | 0.8 | | 1.5 | MHz | RSELx = 7, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (12, 3) | fDCO(12,3) | 4.3 | | 7.3 | MHz | RSELx = 12, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (13, 3) | fDCO(13,3) | 6 | 7.8 | 9.6 | MHz | RSELx = 13, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (14, 3) | fDCO(14,3) | 8.6 | | 13.9 | MHz | RSELx = 14, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (15, 3) | fDCO(15,3) | 12 | | 18.5 | MHz | RSELx = 15, DCOx = 3, MODx = 0, 3 V | 27 |
| DCO frequency (15, 7) | fDCO(15,7) | 16 | | 26 | MHz | RSELx = 15, DCOx = 7, MODx = 0, 3 V | 27 |
| 1-MHz tolerance overall | | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_1MHZ, DCOCTL = CALDCO_1MHZ, -40°C to 85°C, 1.8 V to 3.6 V, calibrated at 30°C and 3 V | 28 |
| 8-MHz tolerance overall | | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_8MHZ, DCOCTL = CALDCO_8MHZ, -40°C to 85°C, 2.2 V to 3.6 V, calibrated at 30°C and 3 V | 28 |
| 12-MHz tolerance overall | | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_12MHZ, DCOCTL = CALDCO_12MHZ, -40°C to 85°C, 2.7 V to 3.6 V, calibrated at 30°C and 3 V | 28 |
| 16-MHz tolerance overall | | -6 | 3 | 6 | % | BCSCTL1 = CALBC1_16MHZ, DCOCTL = CALDCO_16MHZ, -40°C to 85°C, 3.3 V to 3.6 V, calibrated at 30°C and 3 V | 28 |
| DCO temperature drift with external resistor ROSC | DT | -0.1 | | 0.1 | %/°C | DCOR = 1, RSELx = 4, DCOx = 3, MODx = 0, 3 V | 30 |
| VLO frequency | fVLO | 4 | 12 | 20 | kHz | -40°C to 85°C, 3 V | 31 |
| LFXT1 oscillator logic-level square-wave input frequency, LF mode | fLFXT1,LF,logic | 10000 | 32768 | 50000 | Hz | XTS = 0, XCAPx = 0, LFXT1Sx = 3, 1.8 V to 3.6 V | 31 |
| LFXT1 oscillator crystal frequency, HF mode 0 | fLFXT1,HF0 | 0.4 | | 1 | MHz | XTS = 1, LFXT1Sx = 0, 1.8 V to 3.6 V | 32 |
| LFXT1 oscillator crystal frequency, HF mode 1 | fLFXT1,HF1 | 1 | | 4 | MHz | XTS = 1, LFXT1Sx = 1, 1.8 V to 3.6 V | 32 |
| LFXT1 oscillator crystal frequency, HF mode 2 | fLFXT1,HF2 | 2 | | 10 | MHz | XTS = 1, LFXT1Sx = 2, 1.8 V to 3.6 V | 32 |
| LFXT1 oscillator crystal frequency, HF mode 2 | fLFXT1,HF2 | 2 | | 16 | MHz | XTS = 1, LFXT1Sx = 2, 3 V to 3.6 V | 32 |
| LFXT1 oscillator logic-level square-wave input frequency, HF mode 3 | fLFXT1,HF,logic | 0.4 | | 10 | MHz | XTS = 1, LFXT1Sx = 3, 1.8 V to 3.6 V | 32 |
| Oscillator fault frequency, HF mode | fFault,HF | 30 | | 300 | kHz | XTS = 1, LFXT1Sx = 3, 2.2 V, 3 V | 32 |
| Duty cycle, HF mode at 10 MHz | | 40 | 50 | 60 | % | XTS = 1, measured at P2.0/ACLK, fLFXT1,HF = 10 MHz, 2.2 V, 3 V | 32 |
| Duty cycle, LF mode | | 30 | 50 | 70 | % | XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz, 2.2 V | 31 |
| USCI maximum BITCLK clock frequency (UART) | fmax,BITCLK | | | 2 | MHz | 3 V; equals baudrate in MBaud | 34 |
| UART receive deglitch time | tτ | 50 | 100 | 600 | ns | 3 V | 34 |
| SCL clock frequency (I2C) | fSCL | 0 | | 400 | kHz | 3 V | 36 |
| Pulse duration of spikes suppressed by input filter (I2C) | tSP | 50 | 100 | 600 | ns | 3 V | 36 |
| Offset voltage, Comparator_A+ | V(offset) | -10 | | 10 | mV | 3 V | 36 |
| Analog supply voltage | VCC | 2.2 | | 3.6 | V | VSS = 0 V | 38 |
| Positive built-in reference voltage | VREF+ | 1.41 | 1.5 | 1.59 | V | 3 V, IVREF+ ≤ IVREF+max, REF2_5V = 0 | 39 |
| Temperature coefficient of built-in reference | TCREF+ | -100 | | 100 | ppm/°C | IVREF+ = const with 0 mA ≤ IVREF+ ≤ 1 mA, 3 V | 39 |
## CAD (KiCad official)
- Symbol: `MSP430G2955IRHA40R`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`
- 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `msp430g2955irha40r-etched.step` / `msp430g2955irha40r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430g2955irha40r.step` / `msp430g2955irha40r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/msp430g2955.pdf) (75 pp, sha256 `79ef358a23e21191`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/msp430g2955irha40r-datasheet.pdf)