main
Ray Publish 0.1.0 b491e86

MSP430G2433IPW20R

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

MSP430G2433IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Digital supply voltage, 1.8 V to 3.6 V during program execution and 2.2 V to 3.6 V during flash programming or erase.
2 P1.0/TA0CLK/ACLK/A0 bidirectional General-purpose digital I/O pin, with alternate functions Timer0_A TACLK input, ACLK signal output, and ADC10 analog input A0.
3 P1.1/TA0.0/UCA0RXD/UCA0SOMI/A1 bidirectional General-purpose digital I/O pin, with alternate functions Timer0_A CCI0A input or Out0 output, USCI_A0 UART receive data or SPI slave out/master in, ADC10 analog input A1, and BSL transmit.
4 P1.2/TA0.1/UCA0TXD/UCA0SIMO/A2 bidirectional General-purpose digital I/O pin, with alternate functions Timer0_A CCI1A input or Out1 output, USCI_A0 UART transmit data or SPI slave in/master out, and ADC10 analog input A2.
5 P1.3/ADC10CLK/A3/VREF-/VEREF- bidirectional General-purpose digital I/O pin, with alternate functions ADC10 conversion clock output, ADC10 analog input A3, and ADC10 negative reference VREF-/VEREF-.
6 P1.4/SMCLK/UCB0STE/UCA0CLK/VREF+/VEREF+/A4/TCK bidirectional General-purpose digital I/O pin, with alternate functions SMCLK signal output, USCI_B0 slave transmit enable, USCI_A0 clock input/output, ADC10 analog input A4, ADC10 positive reference VREF+/VEREF+, and JTAG test clock TCK.
7 P1.5/TA0.0/UCB0CLK/UCA0STE/A5/TMS bidirectional General-purpose digital I/O pin, with alternate functions Timer0_A compare Out0 output, USCI_B0 clock input/output, USCI_A0 slave transmit enable, ADC10 analog input A5, BSL receive, and JTAG test mode select TMS.
8 P2.0/TA1.0 bidirectional General-purpose digital I/O pin with interrupt capability, with alternate functions Timer1_A capture CCI0A input and compare Out0 output.
9 P2.1/TA1.1 bidirectional General-purpose digital I/O pin with interrupt capability, with alternate functions Timer1_A capture CCI1A input and compare Out1 output.
10 P2.2/TA1.1 bidirectional General-purpose digital I/O pin with interrupt capability, with alternate functions Timer1_A capture CCI1B input and compare Out1 output.
11 P2.3/TA1.0 bidirectional General-purpose digital I/O pin with interrupt capability, with alternate functions Timer1_A capture CCI0B input and compare Out0 output.
12 P2.4/TA1.2 bidirectional General-purpose digital I/O pin with interrupt capability, with alternate functions Timer1_A capture CCI2A input and compare Out2 output.
13 P2.5/TA1.2 bidirectional General-purpose digital I/O pin with interrupt capability, with alternate functions Timer1_A capture CCI2B input and compare Out2 output.
14 P1.6/TA0.1/UCB0SOMI/UCB0SCL/A6/TDI/TCLK bidirectional General-purpose digital I/O pin, with alternate functions Timer0_A compare Out1 output, USCI_B0 SPI slave out/master in or I2C clock SCL, ADC10 analog input A6, and JTAG TDI/TCLK.
15 P1.7/UCB0SIMO/UCB0SDA/A7/TDO/TDI bidirectional General-purpose digital I/O pin, with alternate functions USCI_B0 SPI slave in/master out or I2C data SDA, ADC10 analog input A7, and JTAG test data output TDO or test data input TDI.
16 RST/NMI/SBWTDIO input Reset input, nonmaskable interrupt input, or Spy-Bi-Wire test data input/output during programming and test.
17 TEST/SBWTCK input Selects test mode for the JTAG pins on Port 1 (device protection fuse is connected to TEST), and serves as Spy-Bi-Wire test clock input during programming and test.
18 XOUT/P2.7 bidirectional Output terminal of the crystal oscillator or general-purpose digital I/O P2.7; if used as an input, excess current flows until P2SEL.7 is cleared.
19 XIN/P2.6/TA0.1 bidirectional Input terminal of the crystal oscillator, or general-purpose digital I/O P2.6 with Timer0_A compare Out1 output.
20 DVSS power_in Ground reference for the digital supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage during program execution VCC 1.8 3.6 V During program execution 13
Supply voltage during flash programming or erase VCC 2.2 3.6 V During flash programming or erase 13
Operating free-air temperature TA -40 85 °C 13
Processor frequency (maximum MCLK frequency using USART) fSYSTEM 6 MHz VCC = 1.8 V, duty cycle = 50% ±10% 13
Processor frequency (maximum MCLK frequency using USART) fSYSTEM 12 MHz VCC = 2.7 V, duty cycle = 50% ±10% 13
Processor frequency (maximum MCLK frequency using USART) fSYSTEM 16 MHz VCC = 3.3 V, duty cycle = 50% ±10% 13
Voltage applied at VCC to VSS VCC -0.3 4.1 V All voltages referenced to VSS 13
Voltage applied to any pin -0.3 V Referenced to VSS 13
Diode current at any device pin -2 2 mA 13
Storage temperature Tstg -55 150 °C Unprogrammed device 13
Supply voltage (DCO range) VCC 1.8 3.6 V RSELx < 14 24
Supply voltage (DCO range) VCC 2.2 3.6 V RSELx = 14 24
Supply voltage (DCO range) VCC 3 3.6 V RSELx = 15 24
Active mode (AM) current at 1 MHz IAM,1MHz 330 420 µA VCC = 3 V; fDCO = fMCLK = fSMCLK = 1 MHz, fACLK = 0 Hz, program executes in flash, CPUOFF = 0 14
Low-power mode 3 (LPM3) current, LFXT1 ILPM3,LFXT1 0.7 1.5 µA TA = 25°C, VCC = 2.2 V; fACLK = 32768 Hz, CPUOFF = 1, SCG0 = 1, SCG1 = 1 16
Low-power mode 3 (LPM3) current, VLO ILPM3,VLO 0.5 0.7 µA TA = 25°C, VCC = 2.2 V; fACLK from internal VLO 16
Low-power mode 4 (LPM4) current ILPM4 0.1 0.5 µA TA = 25°C, VCC = 2.2 V; fACLK = 0 Hz, OSCOFF = 1 16
Low-power mode 4 (LPM4) current ILPM4 0.8 1.7 µA TA = 85°C, VCC = 2.2 V; fACLK = 0 Hz, OSCOFF = 1 16
Positive-going input threshold voltage VIT+ 1.35 2.25 V VCC = 3 V 19
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC = 3 V 19
Input voltage hysteresis (VIT+, VIT-) Vhys 0.3 1 V VCC = 3 V 19
Pullup or pulldown resistor RPull 20 35 50 kΩ VCC = 3 V; pullup VIN = VSS, pulldown VIN = VCC 19
High-impedance leakage current Ilkg(Px.y) -50 50 nA VCC = 3 V; see notes (1) (2) 19
DCO frequency (6, 3) fDCO(6,3) 0.54 1.06 MHz VCC = 3 V; RSELx = 6, DCOx = 3, MODx = 0 24
DCO frequency (7, 3) fDCO(7,3) 0.8 1.5 MHz VCC = 3 V; RSELx = 7, DCOx = 3, MODx = 0 24
DCO frequency (12, 3) fDCO(12,3) 4.3 7.3 MHz VCC = 3 V; RSELx = 12, DCOx = 3, MODx = 0 24
DCO frequency (13, 3) fDCO(13,3) 6 9.6 MHz VCC = 3 V; RSELx = 13, DCOx = 3, MODx = 0 24
DCO frequency (14, 3) fDCO(14,3) 8.6 13.9 MHz VCC = 3 V; RSELx = 14, DCOx = 3, MODx = 0 24
DCO frequency (15, 3) fDCO(15,3) 12 18.5 MHz VCC = 3 V; RSELx = 15, DCOx = 3, MODx = 0 24
DCO frequency (15, 7) fDCO(15,7) 16 26 MHz VCC = 3 V; RSELx = 15, DCOx = 7, MODx = 0 24
1-MHz tolerance over temperature -3 0.5 3 % 0°C to 85°C, VCC = 3 V; calibrated at 30°C and 3 V 25
1-MHz tolerance over VCC -3 2 3 % 30°C, VCC = 1.8 V to 3.6 V; calibrated at 30°C and 3 V 25
1-MHz tolerance overall -6 3 6 % -40°C to 85°C, VCC = 1.8 V to 3.6 V; calibrated at 30°C and 3 V 25
LFXT1 oscillator logic-level square-wave input frequency, LF mode fLFXT1,LF,logic 10000 32768 50000 Hz XTS = 0, XCAPx = 0, LFXT1Sx = 3; VCC = 1.8 V to 3.6 V 27
Duty cycle, LF mode 30 50 70 % XTS = 0, measured at P2.0/ACLK, fLFXT1,LF = 32768 Hz; VCC = 2.2 V 27
Oscillator fault frequency, LF mode fFault,LF 10 10000 Hz XTS = 0, XCAPx = 0, LFXT1Sx = 3; VCC = 2.2 V 27
VLO frequency fVLO 4 12 20 kHz -40°C to 85°C; VCC = 3 V 27
Analog supply voltage VCC 2.2 3.6 V VSS = 0 V 31
Positive built-in reference voltage VREF+ 1.41 1.5 1.59 V IVREF+ ≤ IVREF+max, REF2_5V = 0; VCC = 3 V 32
Positive built-in reference voltage VREF+ 2.35 2.5 2.65 V IVREF+ ≤ IVREF+max, REF2_5V = 1; VCC = 3 V 32
Maximum VREF+ load current ILD,VREF+ -1 1 mA VCC = 3 V 32
Maximum capacitance at pin VREF+ CVREF+ 100 pF IVREF+ ≤ ±1 mA, REFON = 1, REFOUT = 1; VCC = 3 V 32
Temperature coefficient TCREF+ -100 100 ppm/°C IVREF+ = const with 0 mA ≤ IVREF+ ≤ 1 mA; VCC = 3 V 32
ADC10 input clock frequency fADC10CLK 0.45 6.3 MHz For specified linearity performance, ADC10SR = 0; VCC = 3 V 33
ADC10 input clock frequency fADC10CLK 0.45 1.5 MHz For specified linearity performance, ADC10SR = 1; VCC = 3 V 33
ADC10 built-in oscillator frequency fADC10OSC 3.7 6.3 MHz ADC10DIVx = 0, ADC10SSELx = 0, fADC10CLK = fADC10OSC; VCC = 3 V 33
Conversion time tCONVERT 2.06 3.51 µs ADC10 built-in oscillator, ADC10SSELx = 0, fADC10CLK = fADC10OSC; VCC = 3 V 33
Positive external reference input voltage range VEREF+ 1.4 V VEREF+ > VEREF-, SREF1 = 1, SREF0 = 0 33
Positive external reference input voltage range VEREF+ 1.4 3 V VEREF- ≤ VEREF+ ≤ VCC, 0.15 V, SREF1 = 1, SREF0 = 1 33
Negative external reference input voltage range VEREF- 0 1.2 V VEREF+ > VEREF- 33
Differential external reference input voltage range ΔVEREF 1.4 V VEREF+ > VEREF- 33
Static input current into VEREF+ IVEREF+ -1 1 µA 0 V ≤ VEREF+ ≤ VCC, SREF1 = 1, SREF0 = 0; VCC = 3 V 33
Integral linearity error EI -1 1 LSB VCC = 3 V 33
Differential linearity error ED -1 1 LSB VCC = 3 V 33
Offset error EO -1 1 LSB Source impedance RS < 100 Ω; VCC = 3 V 33
Gain error EG -2 1.1 2 LSB VCC = 3 V 33
Junction-to-ambient thermal resistance, still air RθJA 86.5 °C/W TSSOP (PW-20) 18
Junction-to-board thermal resistance θJB 39 °C/W TSSOP (PW-20) 18
Junction-to-case (top) thermal resistance RθJC(TOP) 20.8 °C/W TSSOP (PW-20) 18

CAD (KiCad official)

  • Symbol: MSP430G2433IPW20R
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: msp430g2433ipw20r-etched.step / msp430g2433ipw20r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2433ipw20r.step / msp430g2433ipw20r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (96 pp, sha256 37b72756d9da8e02, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF