main
Ray msp430g2212ipw20r: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) cf05c71
{
  "schema_version": 1,
  "type": "component",
  "slug": "msp430g2212ipw20r",
  "title": "MSP430G2212IPW20R",
  "brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "msp430g2212ipw20r"
  ],
  "component": {
    "mpn": "MSP430G2212IPW20R",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/msp430g2452",
    "parts": {
      "symbol": "msp430g2212ipw20r.kicad_sym",
      "footprint": "msp430g2212ipw20r.kicad_mod",
      "model_3d": "msp430g2212ipw20r-etched.glb",
      "model_3d_plain": "msp430g2212ipw20r.glb",
      "model_3d_step": "msp430g2212ipw20r-etched.step",
      "model_3d_step_plain": "msp430g2212ipw20r.step",
      "lbr": "msp430g2212ipw20r.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "DVCC",
        "type": "power_in",
        "description": "Digital supply voltage. Operating range 1.8 V to 3.6 V referenced to DVSS. Decouple locally with a 100 nF ceramic capacitor to DVSS."
      },
      {
        "number": "2",
        "name": "P1.0/TA0CLK/ACLK/CA0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A external clock input TACLK, ACLK signal output, and Comparator_A+ channel CA0."
      },
      {
        "number": "3",
        "name": "P1.1/TA0.0/CA1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A capture CCI0A input / compare Out0 output and Comparator_A+ channel CA1."
      },
      {
        "number": "4",
        "name": "P1.2/TA0.1/CA2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A capture CCI1A input / compare Out1 output and Comparator_A+ channel CA2."
      },
      {
        "number": "5",
        "name": "P1.3/CAOUT/CA3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Comparator_A+ output CAOUT and Comparator_A+ channel CA3."
      },
      {
        "number": "6",
        "name": "P1.4/SMCLK/TA0.2/CA4/TCK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with SMCLK signal output, Timer0_A capture CCI2A input / compare Out2 output, Comparator_A+ channel CA4, and JTAG TCK."
      },
      {
        "number": "7",
        "name": "P1.5/TA0.0/SCLK/CA5/TMS",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with Timer0_A compare Out0, USI clock (SCLK: input in I2C mode, in/output in SPI mode), Comparator_A+ channel CA5, and JTAG TMS."
      },
      {
        "number": "8",
        "name": "P2.0",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor."
      },
      {
        "number": "9",
        "name": "P2.1",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor."
      },
      {
        "number": "10",
        "name": "P2.2",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor."
      },
      {
        "number": "11",
        "name": "P2.3",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor."
      },
      {
        "number": "12",
        "name": "P2.4",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor."
      },
      {
        "number": "13",
        "name": "P2.5",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor."
      },
      {
        "number": "14",
        "name": "P1.6/TA0.1/SDO/SCL/CA6/TDI/TCLK",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with Timer0_A compare Out1, USI SDO (SPI data output), USI SCL (I2C clock), Comparator_A+ channel CA6, and JTAG TDI/TCLK."
      },
      {
        "number": "15",
        "name": "P1.7/SDI/SDA/CAOUT/CA7/TDO/TDI",
        "type": "bidirectional",
        "description": "General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with USI SDI (SPI data input), USI SDA (I2C data), Comparator_A+ output CAOUT, Comparator_A+ channel CA7, and JTAG TDO/TDI."
      },
      {
        "number": "16",
        "name": "RST/NMI/SBWTDIO",
        "type": "input",
        "description": "Active-low reset input; also serves as non-maskable interrupt (NMI) input and as the Spy-Bi-Wire data I/O (SBWTDIO) during programming/debug. Requires an external pull-up resistor (typ. 47 kΩ) plus a small capacitor to DVSS for reliable reset."
      },
      {
        "number": "17",
        "name": "TEST/SBWTCK",
        "type": "input",
        "description": "Selects JTAG test mode for Port 1 pins; the device protection fuse is connected to TEST. Also serves as the Spy-Bi-Wire test clock input (SBWTCK) during programming and debug."
      },
      {
        "number": "18",
        "name": "XOUT/P2.7",
        "type": "bidirectional",
        "description": "Crystal oscillator output for a 32 kHz watch crystal on LFXT1; alternately usable as GPIO P2.7."
      },
      {
        "number": "19",
        "name": "XIN/P2.6/TA0.1",
        "type": "bidirectional",
        "description": "Crystal oscillator input for LFXT1 (32 kHz watch crystal) or external digital clock source; alternately usable as GPIO P2.6 or Timer0_A compare Out1."
      },
      {
        "number": "20",
        "name": "DVSS",
        "type": "power_in",
        "description": "Digital ground reference (0 V). Connect to the board ground plane with a low-inductance path."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/msp430g2452",
        "pages": null,
        "sha256": "4a95b55c77e49dbf",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "msp430g2212ipw20r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "msp430g2212ipw20r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1f6361fdc050cb4eb751f8a9c05bba854da563aa2c7613ee3ca87f57d6fa6cd3",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-20",
      "Category": "Embedded Processors & Controllers",
      "Pins": "20"
    }
  },
  "variants": [
    {
      "mpn": "MSP430G2212IPW20R",
      "kind": "packaging"
    },
    {
      "mpn": "MSP430G2212IPW20RIN20",
      "kind": "packaging"
    },
    {
      "mpn": "MSP430G2212IPW20RIPW14",
      "kind": "packaging"
    },
    {
      "mpn": "MSP430G2212IPW20RIRSA16",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "msp430g2212ipw20r"
  ],
  "discovery_pitch": "MSP430G2212IPW20R (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "msp430g2212ipw20r.kicad_sym",
    "msp430g2212ipw20r.kicad_mod",
    "msp430g2212ipw20r.glb",
    "msp430g2212ipw20r.step",
    "msp430g2212ipw20r.lbr",
    "docs/hero.png",
    "docs/msp430g2212ipw20r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:28:35.295Z"
}