main
Ray msp430g2212ipw20r: laser-etched CAD + chip hero (factory 2.0.0 backfill) 4beb4fd

MSP430G2212IPW20R

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

MSP430G2212IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Digital supply voltage. Operating range 1.8 V to 3.6 V referenced to DVSS. Decouple locally with a 100 nF ceramic capacitor to DVSS.
2 P1.0/TA0CLK/ACLK/CA0 bidirectional General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A external clock input TACLK, ACLK signal output, and Comparator_A+ channel CA0.
3 P1.1/TA0.0/CA1 bidirectional General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A capture CCI0A input / compare Out0 output and Comparator_A+ channel CA1.
4 P1.2/TA0.1/CA2 bidirectional General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Timer0_A capture CCI1A input / compare Out1 output and Comparator_A+ channel CA2.
5 P1.3/CAOUT/CA3 bidirectional General-purpose digital I/O with interrupt and configurable pull-up/pull-down. Muxed with Comparator_A+ output CAOUT and Comparator_A+ channel CA3.
6 P1.4/SMCLK/TA0.2/CA4/TCK bidirectional General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with SMCLK signal output, Timer0_A capture CCI2A input / compare Out2 output, Comparator_A+ channel CA4, and JTAG TCK.
7 P1.5/TA0.0/SCLK/CA5/TMS bidirectional General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with Timer0_A compare Out0, USI clock (SCLK: input in I2C mode, in/output in SPI mode), Comparator_A+ channel CA5, and JTAG TMS.
8 P2.0 bidirectional General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor.
9 P2.1 bidirectional General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor.
10 P2.2 bidirectional General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor.
11 P2.3 bidirectional General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor.
12 P2.4 bidirectional General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor.
13 P2.5 bidirectional General-purpose digital I/O with interrupt capability and configurable pull-up/pull-down resistor.
14 P1.6/TA0.1/SDO/SCL/CA6/TDI/TCLK bidirectional General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with Timer0_A compare Out1, USI SDO (SPI data output), USI SCL (I2C clock), Comparator_A+ channel CA6, and JTAG TDI/TCLK.
15 P1.7/SDI/SDA/CAOUT/CA7/TDO/TDI bidirectional General-purpose digital I/O with interrupt and pull-up/pull-down. Muxed with USI SDI (SPI data input), USI SDA (I2C data), Comparator_A+ output CAOUT, Comparator_A+ channel CA7, and JTAG TDO/TDI.
16 RST/NMI/SBWTDIO input Active-low reset input; also serves as non-maskable interrupt (NMI) input and as the Spy-Bi-Wire data I/O (SBWTDIO) during programming/debug. Requires an external pull-up resistor (typ. 47 kΩ) plus a small capacitor to DVSS for reliable reset.
17 TEST/SBWTCK input Selects JTAG test mode for Port 1 pins; the device protection fuse is connected to TEST. Also serves as the Spy-Bi-Wire test clock input (SBWTCK) during programming and debug.
18 XOUT/P2.7 bidirectional Crystal oscillator output for a 32 kHz watch crystal on LFXT1; alternately usable as GPIO P2.7.
19 XIN/P2.6/TA0.1 bidirectional Crystal oscillator input for LFXT1 (32 kHz watch crystal) or external digital clock source; alternately usable as GPIO P2.6 or Timer0_A compare Out1.
20 DVSS power_in Digital ground reference (0 V). Connect to the board ground plane with a low-inductance path.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Ordering variants

Same part, different packaging or reel option.

  • MSP430G2212IPW20R
  • MSP430G2212IPW20RIN20
  • MSP430G2212IPW20RIPW14
  • MSP430G2212IPW20RIRSA16

CAD (KiCad official)

  • Symbol: MSP430G2212IPW20R
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: msp430g2212ipw20r-etched.step / msp430g2212ipw20r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2212ipw20r.step / msp430g2212ipw20r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 4a95b55c77e49dbf, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF